Cart
← Back to Product Catalog

Innosonix – MA32/HP²

Amplifiers

More details

Similar Products

rdl-av-xmn4|rdl-av-xmn4
  • RDL

RDL – AV-XMN4

The AV-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels.  The AV-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the AV-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range. P48 phantom voltage is supplied to each microphone input. The AV-XMN4 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance. The AV-XMN4 may be powered from an external 24 Vdc power supply, available separately. The AV-XMN4 is equipped to operate from a PoE enabled network switch. The AV-XMN4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-XMN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The AV-XMN4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Features
  • Dante Network Interface for Four Audio Mic Inputs
  • Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
  • 48 V Mic Phantom (P48) on each input
  • Four XLR Front-Panel Inputs
  • Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
  • Special Software Not Required for Module Setup
  • High Resolution 24 Bit Analog to Digital Conversion
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
  • Mounts on a Microphone Stand using an RDL SF-MSM1
    Amplifiers
See the product
Crest_Audio_CKd_604_Front_03611450
  • Crest Audio

Crest Audio – CKd 604

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
    Amplifiers
  • Dante Ch: 8x8
See the product
  • Extron Electronics

NetPA U 2008 FX

The Extron NetPA U 2008 FX is an eight channel, high performance Dante-enabled power amplifier with software configurable outputs that can simultaneously drive 8 ohm, 4 ohm, 70V, or 100V loads in multi-zone systems. For maximum flexibility, the total power of two adjacent 200 watt channels is shared, delivering up to 400 watts per single channel, according to system requirements. With its integrated DSP, the NetPA U 2008 FX includes essential signal processing for complex, decentralized systems while AES67 support ensures compatibility with other network audio devices. This Ecofficient Level 2 design features InstaWake, the ability to go from standby to full power in under 50 milliseconds. The fan cooled 1U enclosure does not require empty rack spaces for ventilation and includes front and rear rack mount hardware for stability.
    Amplifiers
  • 48kHz
  • AES67 Enabled
See the product