Dante-enabled Products

This product has reached end of life. Please refer to dLive C1500.The iLive-R72 provides an ultra-compact rack mountable solution with fixed format I/O. It features a backlit TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.

This product has reached end of life. Please refer to dLive S3000.The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-80 allows a variety of audio I/O modules, network formats and redundant power supply options, and can be shipped in a touring flight case.

This product has reached end of life. Please refer to dLive C2500.TheÊiLive-T80 provides all iLive functionality in a cost-effective, light weight chassis with fixed format I/O. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.

This product has reached end of life. Please refer to dLive S5000.The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-112 allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.

This product has reached end of life. Please refer to dLive C3500.TheÊiLive-T112 provides all iLive functionality in a cost-effective, light weight chassis with fixed format I/O.It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.

This product has reached end of life. Please refer to dLive S5000.The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-144 allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.

This product has reached end of life. Please refer to dLive S7000.The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The flagship iLive-176 is the biggest of the modular series and allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.

M-Dante is one of a range of digital audio networking options available for iLive, GLD and ME-U to enable integration with other systems, digital mic splitting, multi-track recording and system expansion. Is is also compatible with Avantis and dLive when fitted with the M-DL-ADAPT adapter frame.

ME-U is a touring grade, 10 port PoE hub providing power and audio to connect multiple ME-1 / ME-500 personal mixers. It comes with a standard input card to interface with Qu, SQ, Avantis, dLive or Aviom¨ A-Net¨, which can be replaced with a MADI, Dante or EtherSound card to take a digital feed of up to 40 sources from third party systems.

xDR-16 helps you satisfy the ever growing hunger for more inputs, more monitor mixes, more recording feeds, more everything that is a fact of pro audio life. xDR-16 puts the I/O where you need it Ð across the other side of the stage, at FoH, in another room, on the drum riser, even in a separate building. Connection is over a single CAT5 cable Ð saving the time, hassle and expense of running audio snakes and stage boxes. xDR-16 is a 16 input, 8 output expander for iLive digital mixing systems. Whether you simply want to accommodate more sources or whether you want local I/O in different areas of a stage or venue, xDR-16 adds to the convenience and flexibility of the iLive concept.

This product has reached "end of life". Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets. The ne800 delivers 400W @ 4 Ohms, or 70V and 100V includes balanced analog inputs, bridge mono mode, selectable 8Hz 12dB/oct or 400Hz 6dB/oct hi-pass filter, input sensitivity switch, remote standby for power up, DC remote level control and full Ethernet control using Ashly’s Protea™ ne Software.

This product has reached "end of life". Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets. The ne1600 delivers 800W into either hi-z or lo-z versions and includes balanced analog inputs, bridge mono mode, selectable 8Hz 12dB/oct or 400Hz 6dB/oct hi-pass filter, input sensitivity switch, remote standby for power up, DC remote level control and full Ethernet control using Ashly’s Protea™ ne Software.

This product has reached "end of life". Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets. The ne2400 delivers 1,200W into either a 4 Ohm or 70V load; the 100V output model is also rated at 1,200W. It includes balanced analog inputs, bridge mono mode, selectable 8Hz 12dB/oct or 400Hz 6dB/oct hi-pass filter, input sensitivity switch, remote standby for power up, DC remote level control and full Ethernet control using Ashly’s Protea™ ne Software.

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers. The ne4250bd offer 4-Channels @ 250W per channel with separate hi-z and lo-z models. NE offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. NE Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor.

There are an additional 7 models in the ne4250 series:

• ne4250.25bd - Network Power Amplifier 4 x 250W @ 25V. Includes OPDante & OPDAC-4 Cards
• ne4250.70bd - Network Power Amplifier 4 x 250W @ 70V. Includes OPDante & OPDAC-4 Cards
• ne4250.10bd - Network Power Amplifier 4 x 250W @ 100V. Includes OPDante & OPDAC-4 Cards
• ne4250ped - Network Power Amplifier 4 x 250W @ 4 Ohms w/Protea DSP. Includes OPDante & OPDAC-4 Cards
• ne4250.25ped - Network Power Amplifier 4 x 250W @ 25V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
• ne4250.70ped - Network Power Amplifier 4 x 250W @ 70V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
• ne4250.10ped - Network Power Amplifier 4 x 250W @ 100V w/Protea DSP. Includes OPDante & OPDAC-4 Cards

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne4400t (4 in/4 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne4800t (4 in/8 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers. The ne8250bd offer 8-Channels @ 250W per channel with separate hi-z and lo-z models. NE offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. NE Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor.

The ne8250 series contains these additional models:

• ne8250.25bd - Network Power Amplifier 8 x 250W @ 25V. Includes OPDante & OPDAC-8 Cards
• ne8250.70bd - Network Power Amplifier 8 x 250W @ 70V. Includes OPDante & OPDAC-8 Cards
• ne8250.10bd - Network Power Amplifier 8 x 250W @100V. Includes OPDante & OPDAC-8 Cards
• ne8250ped - Network Power Amplifier 8 x 250W @ 4 Ohms w/Protea DSP. Includes OPDante & OPDAC-8 Cards
• ne8250.25ped - Network Power Amplifier 8 x 250W @ 25V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
• ne8250.70ped - Network Power Amplifier 8 x 250W @ 70V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
• ne8250.10ped - Network Power Amplifier 8 x 250W @ 100V w/Protea DSP. Includes OPDante & OPDAC-8 Cards

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne8800 (8 in/8 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

The nXp1.52d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp1.54d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions shall include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp3.02d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4125 is a 4-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4125d is also available in these models:

pema 4125.70d - pema Network Power Amp 4 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

pema 4125.10d - pema Network Power Amp 4 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4250 is a 4-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4250d is also available in these models:

pema 4250.25d - pema Network Power Amp 4 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.70d - pema Network Power Amp 4 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.10d - pema Network Power Amp 4 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8125 is a 8-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8125d is also available in these models:

pema 8125.70d - pema Network Power Amp 8 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

pema 8125.10d - pema Network Power Amp 8 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8250 is a 8-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8250 is also available in these models:

pema 8250.25d - pema Network Power Amp 8 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.70d - pema Network Power Amp 8 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.10d - pema Network Power Amp 8 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

The BB-88DT is a BlueBridge DSP audio processor featuring a 8 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.