DELEC – oratis compact CS 1624 DANTE


More details

Similar Products

  • Barix

Annuncicom MPI400 Dante

The Annuncicom MPI400 is a versatile Audio over IP device designed to serve as an end point or gateway between IP based intercom (VoIP/SIP or streaming) and traditional paging/intercom systems, microphone/speakers or an amplifier.

    Intercoms
  • Dante Ch: 2x2
  • 16-bit, 24-bit
clear-com-eclipse-hx-omega_1200px|clear-com-eclipse-hx-omega_1200px
  • Clear-Com

Clear-Com – Eclipse HX-Omega

Eclipse HX-Omega is the most advanced and highest density digital matrix system on the market, offering up to 460 ports (using combinations of 64-channel MADI cards, 32 port IP/Integra cards and 16 port MVX-A16 RJ-45 cards) over 15 interface card slots in a 6RU chassis.   Eclipse HX-Omega is the most advanced and highest density digital matrix system on the market, offering up to 512 ports (with any combination of 64 frames). Each 6RU Eclipse HX-Omega system features 15 interface card slots for housing one of many types of interface cards available for different applications. The MVX-A16 Interface card, for example, provides full-duplex connections with panels, external lines, and interfaces to other matrix systems. External interface modules are connected using external 1RU and 3RU IMF frames, leaving all 15 slots available for port and interface cards. Up to 64 Eclipse HX matrices can be connected to form a single networked installation. Eclipse HX-Omega Features:
  • 6RU system frame with passive back-plane and 15 interface card slots
  • Up to 512 internal ports (with any combination of 64 frames)
  • Dual-redundant processors, CPU-HX fitted; dual-redundant PS-208 power supplies fitted
  • Expandable to become a multi-frame system with redundant non-blocking fiber
  • Networking/Linking options include 4-wire, Fiber, IP, MADI, E1/T1, GPIO, DANTE and AES67
  • Seamless integration with FreeSpeak II Wireless Intercom and IP Communication Panels 
    Intercoms
  • Dante Ch: 64x64
  • 24-bit
oratis-talk-12-x-dante_600px|oratis-talk-12-x-dante_600px
  • DELEC

DELEC – oratis Talk 12 X Dante

The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624. These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.
    Intercoms