Cart
← Back to Product Catalog

DELEC – oratis compact CS 1212 DANTE

Intercoms

More details

Similar Products

oratis-talk-16-dante_600px
  • DELEC

DELEC – oratis Talk 16 Dante

The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624.  These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.
    Intercoms
See the product
Beatrice_P2_angle_BAN
  • Glensound

Glensound – Beatrice P2

The Beatrice P2 is a phone handset for Dante® network intercom. The user of the handset on the P2 unit can listen to two audio feeds from the network and send two audio channels out onto the network. Depending upon how the Dante® network has been routed the incoming audio circuits and outgoing circuits can be different locations and the outgoing circuits can be routed to multiple locations. Audio to the handset from the two network sources is routed to the telephone's earpiece only when the handset is off the hook. when the handset is picked up (off hook), the handset's microphone is turned on and two switches allow the operate to route the handset's microphone to one or other (or both) of the outgoing network audio channels.
    Intercoms
  • Dante Ch: 2x2
  • 24-bit
See the product
npx_h1040_front
  • Biamp

Biamp – NPX H1040

The NPX H1040 is a 4-button convenience paging station with handheld microphone for use in Qt X and Tesira systems. The H1040 features embedded DSP and on-board memory to support standard and advanced public address functionalities. Digital audio and control data can be transmitted by either AVB or Dante. The NPX H1040 can store four user-configurable page codes and up to 10 prerecorded messages. Additionally, the H1040 supports both tabletop and wall mounting with a removable “foot” that allows the paging station to be mounted flat against any surface, and a K-slot is included for enhanced physical security via an optional Kensington® lock. The NPX H1040 meets convenience paging requirements for facilities of all sizes.

    Intercoms
  • Dante Ch: 0x1
See the product