Dante-enabled Product Catalog

The WP-DN360 is a digital amplifier with high efficiency and high reliability design.  The WP-DN360 is a digital amplifier with high efficiency and high reliability design. 

• WP-DN 360 is 4 ch with maximum output 560 W × 4 (4 Ω load)
• Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
• Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
• Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
• Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
• Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
• Corresponds to EIA rack mount. 
• BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 

• WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
• Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
• Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
• Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
• Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
• Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
• Corresponds to EIA rack mount. 
• BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.

The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation. The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation.

• In addition to analog input 32 ch, AIR microphone (L / R), announcement microphone, talkback are combined and equipped with a total of 36 ch. 
• Equipped with 16 channels of analog output, it can output not only matrix output but also mixing bus. 
• 100 mm motor drive fader is adopted, with a total of 33 loaded. The fader part consists of 2 layers. 
• 96 pattern memory, 8 mute groups plus 16 library memory for equalizer and dynamics respectively. 
• Remote control software for PC that facilitates monitoring of multiple channels and data management for each project is standard attached. 
• It can also support remote control by iPad, simple adjustment on / in the stage is possible. 
• Three expansion slots are installed, and one 8-ch analog input card is included as standard in one. 
• option card (WR-PC001) Dante in mounting TM voice input / output via the audio network (16 input 16 output per 1SLOT) is possible. 

The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX 400.   The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX400.

• Analog input 12 ch (mono microphone / line input x 8, stereo line input x 2), analog output 8 ch. 
• Standard installed PC remote control software that facilitates multi-channel condition monitoring and memory management for each project. 
• It can also support remote control by iPad, simple adjustment on / in the stage is possible. Also equipped with one expansion slot. 
• option card (WR-PC001) of Dante by mounting TM possible voice input / output via the audio network (16 input 16 output).

Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700. Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700.

MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software.  MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. The 4 output stages use the well-proven Pascal Class D SA-2 module, obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. MDA4-1000M is also a capable and sophisticated loudspeaker processor, with powerful M716 DSP running 96 kHz / 24 bit and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system. A 12dB headroom process is available.  

24 tracks digital on-site audio recorder with embedded mixer plate, intuitive interface and a optional Dante board with 32 channels input and output.

Analog and Digital Inputs

• 12 analog inputs on XLRs
• 8 low noise mic preamps with very high quality transformer, 48V Phantom, limiters and filters
• 4 analog line inputs
• Multiple AES digital inputs includes 2 AES42 pairs (mode 2), 8 AES/EBU and a Dante Audinate network access

Mixer and Outputs

• Ten tracks mixer plate with magnetic linear assignable faders
• All inputs can be routed to any of the 24 tracks
• All tracks and inputs can be routed to 8 analog auxiliary outputs and /or digital outputs
• Mixdown can be assigned to any of the tracks

Recording Media

• Records and playback to and from internal 256 Gg SSD drive (expandable SSD size)
• Simultaneous recording to internal SSD drive, two SD cards and USB external drive

Metering and Controls

• Ultra bright large swivelling display panel, visibility optimised for shoulder work or cart
• Two large rotary control selectors for easy record and operations in any situations
• Linear control faders addressable to any inputs and output
• New improved interface menu accessible through buttons, jog wheel - All inputs and outputs monitoring and routing available through comprehensive and intuitive menus
• USB keyboard input for easy metadata editing and routing control
• Wifi and Bluetooth communication 

The Dante-MY16-AUD2 is a fully compatible Yamaha Mini-YGDAI card that instantly Dante-enables your Yamaha mixer, processor, interface or power amp. The Dante-MY16-AUD2 is a fully compatible Yamaha Mini-YGDAI card that instantly Dante-enables your Yamaha mixer, processor, interface or power amp. Add up to 32 (16x16) channels at 44.1kHz or 48kHz, or 16 (8x8) channels at 88.2kHz or 96kHz, with each Dante-MY16-AUD2 card you install, with full Dante network audio redundancy over Gigabit Ethernet. Compatible with a range of digital mixing consoles, processors and power amps equipped with MY16-interface compatible card slots, including:

• Digital Mixers: CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
• Interfaces: RSio64-D
• Processors: MRX7-D, MTX5-D, DME24N, DME64N
• Power Amps: Tx4n, Tx5n, Tx6n

Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Control is via a 17-inch multitouch screen inspired by familiar tablet technology, with a straightforward interface that uses established finger gestures to navigate the system. Summa’s considered control simplifies even complex workflow tasks, such as creating mix-minus feeds. Bluefin2 technology gives the Summa 180 a pool of 180 channel processing paths, eight groups, four mains, 16 auxes, and 32 tracks. Its Hydra2 router core provides Summa with the same integral router technology as the Apollo and Artemis consoles.

The AMK DS82-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This is a 2 Channel System. The AMK DS82-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. This is a 2 channel system. One PoE amplified speaker can power a total of (2) speakers, one active and one passive speaker. The passive speaker installed at different zone for different channel of broadcasting. The CX802 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications. This assembly can be used in wide range of projects for paging and background music applications. The DS82-B is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.

Dual DSP audio processing, dante 8-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; dante signal output 8-channel digital network; speaker manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter).  Dual DSP audio processing, dante 8-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; dante signal output 8-channel digital network; speaker manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter). With matrix mixing function for each channel. Built-in automatic mixer function comes DANTE network audio transmission function; and automatic software upgrade (after the upgrade support) Enterne use data transmission and control port; built-in automatic camera tracking; RS-232 bi-directional serial control interface for controlling other external equipment such as: video matrix and other RS-232 devices, or receive a third-party RS-232 control; RS-485 camera control ports; GPIO programmable control interface (8 groups, can be custom programmed control); support plate interface operation control. 1-8 support group scene preset functions; an intuitive, graphical interface software control, can work XP / Windows7,8,10 systems environment. Key Features:

• USB playback and recording features background music
• Support for phone, tablet, and control distributed cloud control
• Input per channel: preamp, signal generator, expander, compressor, 5-band parametric equalizer
• output per channel: 31-band graphic equalizer, delay, crossover, limiter
• Preparation for each channel matrix mixer function, built-in automatic mixer function
• Dual DSP audio processing, built-in automatic mixer, free matching feedback cancellation, echo cancellation, noise cancellation block
• Built-in auto tracking camera function, support multiple standby for each channel matrix mixing function. Built-in automatic mixer function for each channel matrix prepared by mixing capabilities. Built-in automatic mixer function scene preset function;
• using EIA standard 1U aluminum chassis, automatic power-off memory protection;

AVDT-BOB-AS8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on DB25 connector plus optical fiber connection for Dante Network. AVDT-BOB-AS8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on DB25 connector plus optical fiber connection for Dante Network. Embedded DSP allows for full mixing of the four Dante inputs/outputs and the four analog inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Three Gigabit switched ports allows for daisy-chained/star connection without any bandwidth bottleneck. Neutrik port provides Power-Over-Ethernet for direct power supply (alternate 12Vdc jack input can be used as redundant PSU). SFP ports accept multi-mode or single-mode fibers, allowing to link devices on distances up to 20km. The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

AVDT-BOB-AE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on terminal block connectors. AVDT-BOB-AE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on terminal block connectors. Embedded DSP allows for full mixing of the four Dante inputs/outputs and the four analog inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Two Gigabit switched ports allows for daisy-chained connection without any bandwidth bottleneck. One port provides Power-Over-Ethernet for direct power supply (alternate 12Vdc jack input can thus be used as redundant PSU). The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

AVDT-BOB-AE4IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on terminal block connectors. AVDT-BOB-AE4IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on terminal block connectors. Embedded DSP allows for full mixing of the four Dante inputs/outputs and the two analog inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Two Gigabit switched ports allows for daisy-chained connection without any bandwidth bottleneck. One port provides Power-Over-Ethernet for direct power supply (alternate 12Vdc jack input can thus be used as redundant PSU). The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

The Aimline ALX24 is a digital steerable active column-speaker with DANTE®-Input. The Aimline ALX24 is a digital steerable active column-speaker with DANTE®-Input. Main features

• DANTE®-in- and out
• Multibeam-technology
• 4”-chassis with fiberglass-membrane
• Acoustic centre for both beams variable from the bottom to the top
• 3-D-beam for horizontal and vertically aiming
• Strong SPL
• Analogue and digital inputs
• Networking over IP-protocol
• Heavy-duty aluminium-enclosure in a slim design
• A separate digital amp with its own digital signal processor drives each of the components

This technology gives the benefit of being able to aim the acoustical energy up and down the room. This avoids energy waves hitting any walls, windows, glass and other hard surfaces resulting in unwanted reflections: AIMLINE the sound to the audience. The internal digital signal processor also enables a compressor, a gate, a 10-band-parametric equalizer and a delay to be placed into the audio-input path. With simple Windows-software every parameter can be set in real time. All speakers are recognized within a network by their IP-address. ALX-cabinets can be fully monitored for surveillance-issues. Thanks to its very small and unobtrusive enclosure the AIM­LINE-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments. With its two-channel DANTE®-input integration into existing IP-networks as well as a direct integration to other DANTE®-enabled products is simple.

the Aimline ALX32 is a digital steerable active column-speaker with DANTE®-Input. the Aimline ALX32 is a digital steerable active column-speaker with DANTE®-Input. Main features

• DANTE®-in- and out
• Multibeam-technology
• 4”-chassis with fiberglass-membrane
• Acoustic centre for both beams variable from the bottom to the top
• 3-D-beam for horizontal and vertically aiming
• Strong SPL
• Analogue and digital inputs
• Networking over IP-protocol
• Heavy-duty aluminium-enclosure in a slim design
• A separate digital amp with its own digital signal processor drives each of the components

This technology gives the benefit of being able to aim the acoustical energy up and down the room. This avoids energy waves hitting any walls, windows, glass and other hard surfaces resulting in unwanted reflections: AIMLINE the sound to the audience. The internal digital signal processor also enables a compressor, a gate, a 10-band-parametric equalizer and a delay to be placed into the audio-input path. With simple Windows-software every parameter can be set in real time. All speakers are recognized within a network by their IP-address. ALX-cabinets can be fully monitored for surveillance-issues. Thanks to its very small and unobtrusive enclosure the AIM­LINE-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments. With its two-channel DANTE®-input integration into existing IP-networks as well as a direct integration to other DANTE®-enabled products is simple.

LT-DANTE LSlot interface for its Lynx Aurora and Hilo converters. The LT-DANTE is a Dante™ enabled expansion card for audio networking that connects Hilo and Aurora with other Dante-enabled products over Ethernet-based networks. This can be purchased factory installed into Hilo, Aurora 8 and Aurora 16 converters as Hilo-DNT, Aurora 8-DNT and Aurora 16-DNT respectively. The LT-DANTE can also be purchased separately to be used in any Hilo or Aurora converter. LT-DANTE LSlot interface for its Lynx Aurora and Hilo converters. The LT-DANTE is a Dante™ enabled expansion card for audio networking that connects Hilo and Aurora with other Dante-enabled products over Ethernet-based networks. This can be purchased factory installed into Hilo, Aurora 8 and Aurora 16 converters as Hilo-DNT, Aurora 8-DNT and Aurora 16-DNT respectively. The LT-DANTE can also be purchased separately to be used in any Hilo or Aurora converter.

Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to six channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touch-screen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features. Lynx Studio Technology is proud to present the Hilo Reference A/D D/A Converter System. With the pristine, open, transparent audio quality for which Lynx is known, Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to six channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touch-screen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features. Front panel controls support extensive signal routing and mixing, sample rate selection, clock source options, levels, metering and diagnostic features.

The Aurora 16-DNT AD/DA converter provides world-class analog to digital and digital to analog conversion in a compact one-rack space format enabled for Dante audio networks. With sample rates up to 192 kHz, Aurora offers wide, open, uncompressed and unequalized audio for studios, mastering facilities, remote recording, broadcast and production.  The Aurora 16 AD/DA converter provides world-class analog to digital and digital to analog conversion in a compact one-rack space format. With sample rates up to 192 kHz, Aurora offers wide, open, uncompressed and unequalized audio for studios, mastering facilities, remote recording, broadcast and production. Lynx’s exclusive SynchroLock word clock offers extreme jitter reduction, providing clean digital audio signals for Aurora and other digital devices in the studio. Aurora also avoids some of the limitations that other pro level converters have. Aurora does not have a noisy fan, does not lose channel count at higher sample rates and does not require costly analog and digital modules to achieve the unit’s full channel count. Aurora can be used with any audio content. Equalization and limiting functions, which can color or alter the sound, have not been added. Lynx’s design provides accurate conversion, clear clean audio, wide imaging – the sound you put into Aurora is the sound that you get out of Aurora.

The Lynx Aurora 8-DNT is an Aurora 8 combined with a factory installed LT-DANTE interface LT card. The Aurora 8-DNT features 8 channels of up to 24 Bit/192 kHz Mastering Quality analog to digital and digital to analog conversion in single-rack space with an on-board 16 Channel Digital Mixer Providing Flexible I/O Routing. The Aurora™ line of digital audio converters from Lynx Studio Technology offers unprecedented audio quality and control in single-rack space eight and sixteen channel models. The Aurora 8-DNT features 192 kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options with Dante audio network connectivity. Extended functions in Aurora are accessible via computer with the Lynx AES16, AES16e and MIDI . The rear panel has Clock and MIDI In and Out connectors and an LSlot bay, for the optional use of other audio interfaces. Other features include:

• Simultaneous 8 Channel Analog I/O and 8 Channel AES/EBU I/O
• 24 Bit / 192 kHz Mastering Quality A/D and D/A Conversion
• 192 kHz AES/EBU I/O Supporting Single and Dual Wire Modes
• Extensive Remote Control Capability via Lynx AES16, AES16e, and MIDI
• On-board 16 Channel Digital Mixer Provides Flexible I/O Routing
• Word clock I/O with Lynx SynchroLock™ Sample Clock Technology
• Digital I/O DB-25 connectors follow Yamaha pinout protocol
• Analog I/O DB-25 connectors follow Tascam pinout protocol
• RoHS compliant
• Available in 100V, 115V and 230V models

Dual DSP audio processing, dante 64-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; Dante digital network channel signal output 64: Speaker Manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter). Dual DSP audio processing, dante 64-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; Dante digital network channel signal output 64: Speaker Manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter). With matrix mixing function for each channel. Built-in automatic mixer function comes DANTE network audio transmission function; and automatic software upgrade (after the upgrade support) Enterne use data transmission and control port; built-in automatic camera tracking; RS-232 bi-directional serial control interface for controlling other external equipment such as: video matrix and other RS-232 devices, or receive a third-party RS-232 control; RS-485 camera control ports; GPIO programmable control interface (8 groups, can be custom programmed control); support plate interface operation control. 1-8 support group scene preset functions; an intuitive, graphical interface software control, can work XP / Windows7,8,10 systems environment.

The DARK 1616M ia an audio interface that provides connections to a Dante or AES67 ip network. The DARK 1616M ia an audio interface that provides connections to a Dante or AES67 ip network. Inputs & Outputs There are 16 digital inputs and 16 digital outputs, available on 8 x AES connections.  There are also 16 analogue inputs and 16 analogue outputs, available in paralell to the digital.  The analogue and digital outputs are always available, and the inputs work on AES input priority. The AES3 inputs have sample rate converters and can accept input frequencies up to 192kHz.  The incoming AES3 circuit is always sample rate converted to match the Dante newtork frequency.  The AES3 outputs are locked to the sample frequency of the Dante network. Connections For ease of cabling, audio I/O is presented on D25 sockets to the AES59 standard (Tascam wiring convention) for which there are a number of reasonably priced break out cables available from multiple suppliers. Remote Mic Amps The analogue inputs are switchable between mic, line and 48v phantom power.  These are controllable across the network via the Dark Controller Windows 10 app.  This allows remote control by an engineer of the input selection, gain adjust and input on/off control.  A meter is also provided for each input on the app, to monitor the input level and help with setting the gain. Network Interface Being designed for resiliant broadcast applications the Dark1616M features both redundant power supplies and redundant Dante network links with link status GPOs (general purpose outputs (solid state relays)). Both primary and secondary network links are provided with both magnetic (copper RJ45) and fibre (SFP) interface connections. The Dante system itself provides a completely transparant redundant link system which means that if the Dark1616M lost its primary link circuit the secondary link would automatically take over with no loss of audio. The primary and secondary network interfaces are routed internally via a network switch and it is possible to set this switch to work as a traditional network switch instead of the default redundant mode meaning that there would be just one link to the Dante network and the other connections of the switch could have other Dante or network devices connected to them. As with all Dante devices once set up Dark1616 units can be directly connected with each other with no external network hardware. Alarms On the front panel 4 bright LEDs indicate the status of the 2 power supplies and the primary and secondary local network links. In parallel to these 4 indicating LEDs there are 4 solid state relay outputs for connecting to external alarm systems for failure notification of a power supply or link fault.   

The MAGIC THipPro is an IP Telephone Hybrid System with 8 or 16 caller lines. The 1 RU system provides two analogue and eight digital Audio inputs and outputs plus two handset/headset interfaces in addition to the redundant 32 channel Dante interface. The Audio interfaces can be assigned freely to the up to 20 installed workplaces and 6 studios. Alternatively to PC workplaces, control and Pretalk is possible via the MAGIC PhonerSet. Features

• Digital Echo Canceller, AGC and Expander for each caller line
• Conference function with Mix Minus generation
• PRETALK function, optionally Pretalk Streaming on control PC
• Call forwarding
• GPIO contacts
• Up to twenty MAGIC THipPro LAN and MAGIC THipPro Screener workplaces
• MAGIC THipPro Admin Studio Upgrade to split the lines into six studios
• Support of Ember+ and DHD SetLogic IDs
• Competition Management (optional)
• Remote Reporting (optional)
• Twitter integration (optional)

Models

• MAGIC THipPro 8 VoIP
• MAGIC THipPro 16 VoIP

IBC 2016 technology showcase product The MSX 3000 delivers Fairlight’s renowned sound quality for the converged consoles. Its modular design, incorporating cutting edge FPGA technology, delivers a customisable and very cost effective audio I/O solution. IBC 2016 technology showcase product The MSX 3000 delivers Fairlight’s renowned sound quality for the converged consoles. Its modular design, incorporating cutting edge FPGA technology, delivers a customisable and very cost effective audio I/O solution. Based in a 3RU 19” frame, the MSX 3000 offers up to 21 slots that can be used for a range of different MSX I/O modules. The built in router engine features a 1400 x 1400 matrix with one-to-many patching support, allowing for any routing configuration to be defined. With a wide range of MSX modules available, I/O systems can be tailored exactly to your application. The primary connection to the Fairlight Live Audio Processor is via optical MADI. Multiple MADI cards can be accommodated for high-density racks and for very large configurations, multiple MSX 3000 frames can be deployed.

IBC 2016 technology showcase product The 1RU, 19” rack mounted MSX1000 providing 6 slots for I/O modules, a built in 448 x 448 point router, and optional dual redundant hot-swap PSU and versatile sync system. The perfect solution for medium capacity audio I/O. IBC 2016 technology showcase product The 1RU, 19” rack mounted MSX1000 providing 6 slots for I/O modules, a built in 448 x 448 point router, and optional dual redundant hot-swap PSU and versatile sync system. The perfect solution for medium capacity audio I/O.

IBC 2016 technology showcase product The Dante-powered MSX500 compact desktop unit with 4 physical slots, of which 3 are wired. This configuration is ideal when Audio over IP is a requirement, but you only need limited I/O, or you need a flexible solution that supports AoIP on-the-go. IBC 2016 technology showcase product The Dante-powered MSX500 compact desktop unit with 4 physical slots, of which 3 are wired. This configuration is ideal when Audio over IP is a requirement, but you only need limited I/O, or you need a flexible solution that supports AoIP on-the-go.

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment. The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment. All six mixers have TFT bargraph metering which may be selected to either dBFS or PPM metering scales with appropriate ballistics.  The six mixer outputs are available over the Dante network but also as balanced analogue XLR outputs on the rear of the unit.  The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain to more Dante equipped devices.  A special feature of this unit is that any or all of the mixers may be remote controlled. The unit can accept up to six separate remotes each of which is assignable to any of or any combination of the mixers. Perfect for controlling remote sources such as radio talkback feeds.  The data from the remotes is encoded in a modified 'time code' signal so may be carried over any standard audio transport, including audio fibre channels. The remotes are available separately so may be added if and when required. The unit operates on 110-240VAC 50/60Hz with auto switching. Dimensions: 2RU 150mm deep.