Cart
← Back to Product Catalog

Focusrite – Red 8Pre

I/O Interfaces

More details

Similar Products

ktdn30
  • Klark Teknik

Klark Teknik – DN 30T

The new DN 30T, a compact Audinate Dante audio transmitter for connecting mic/instrument or line level sources to a Dante network. The DN 30T can be connected to any Dante receiver via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet (PoE) or via a 24-volt DC input. The DN 30T has stated 96 kHz analog to digital conversion. Balanced or unbalanced 1/4-inch, RCA or stereo 1/8-inch cables are available for connecting to either a smartphone, tablet, microphone or instrument. Input levels can also be adjusted via the level knob. The compact DN 30T is encased in a thick aluminum extrusion housing to protect the electronics. The enclosure also has rubber corner bumpers. Floor and wall mount brackets are included for fixed installation applications.
    I/O Interfaces
See the product
dbt-04-front-5hr
  • Synq

Synq – DBT-04

Top quality bidirectional conversion between DANTE® and 4 hi-grade balanced analog outputs. GIGABIT Ethernet I/O, no linking delays. Built-in DSP AUDIO PROCESSING (parametric EQs, compressors, delays, ...) AUDIO MATRIX: flexible routing, ... WEB SERVER with graphical DSP user interface. Extremely high audio quality: S/N >120dB ~ THD: <0.003% RENTAL version: 4 XLR-line outputs POWER: PowerCON TRUE1 (100V-240Vac) or PoE class 0 2 units fit together in a 1U 19"rack
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.16LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16MR provides 16 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 16x0
  • 16-bit, 24-bit, 32-bit
See the product