Williams Sound – PPA T45 NET D


More details

Similar Products

ram-audio-V9044_1200px|ram-audio-V9044_1200px
  • RAM Audio

RAM Audio – V9044

RAM Audio V9044 (W9044) is a four channels amplifier able to deliver 9000 W into 4 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking. RAM Audio V9044 (W9044) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 9000 W into 4 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.
    Amplifiers
labgruppen-D-20-4L
  • Lab.gruppen AB

Lab.gruppen – D 20:4L

The Lab.gruppen D 20:4L combines 2000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications. The Lab.gruppen D 20:4L combines 2000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
  • Lake People

G103-D-4

Lake People Phone-Amp G103D4 is a headphone amplifier intended for DANTE networks. The G103D4 model comes with a DANTE 4/4 input and two independent stereo amplifiers. 24 Bit / 192 kHz D/A converters with a Signal-to-noise ratio >105 dB and THD+N as low as 0,002 % are driving the powerful headphone amplifiers. These are best suited to drive any headphones from low to high impedance and with low or high sensitivity. To adapt the amp to demanding headphones, to further reduce the noise level or to maximize the travel of the volume control, the gain is internally adaptable by Dip-Switches to optimize the amp; The DANTE digital audio signals are input via a standard RJ45 connector. Lake People G103D4 will accept 4 audio channels. The unpacked audio signals are input to two high quality D/A converters. The recovered analogue signals are buffered, attenuated in the analogue domain and then sent to powerful headphone amplifiers. If required, additional gain of +6 dB or +12 dB can be set by Dip-Switches inside the amp. Each amp section offers a 1/4” and 3.5 mm phone jack which may be used simultaneously. Power supply for the amp is accomplished either by PoE (Power-over-Ethernet) or by a USB wall plug adaptor (not supplied) with USB-B or USB-C connector. The case, front and back panel of G103D4 is made of rugged black anodized aluminum, the lettering is laser engraved. The volume knobs are also made of solid aluminum.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit