Dante-enabled Product Catalog

The Q-SYS I/O Frame is a network I/O interface for the Q-SYS Ecosystem.  It allows for up to four I/O cards, enabling up to 16 channels of input and/or output in a single unit.  Along with a range of analog and digital audio I/O cards, it supports the CDN64 DanteTM audio bridge card, which provides third-party Dante enabled digital audio products the ability to integrate into the Q-SYS Ecosystem.

PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications.  Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications. This means you can distribute the total 400 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today. Features

• PowerShare Technology Distribute the total 400 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
• Load-independent Outputs Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
• Integrated Dante Audio Networking Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
• Dual Feedback Loop System Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
• ControlSpace Networking Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
• Integrated Loudspeaker Processing Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
• Auto-standby Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.

Applications

• Performing arts venues
• Places of worship
• Conference centers
• Retail stores
• Restaurants and bars
• Hospitality venues

PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications.  Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications. This means you can distribute the total 600 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today. Features

• PowerShare Technology Distribute the total 600 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
• Load-independent Outputs Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
• Integrated Dante Audio Networking Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
• Dual Feedback Loop System Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
• ControlSpace Networking Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
• Integrated Loudspeaker Processing Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
• Auto-standby Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.

Applications

• Performing arts venues
• Places of worship
• Conference centers
• Retail stores
• Restaurants and bars
• Hospitality venues

The AE-4D is a compact converter that mutually converts AES/EBU signals and 4-channel Dante signals. With half the size of a standard 1U rack, the AE-4D is suitable for different Dante systems as an exquisite AES/EBU input/output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. AE-4D supports up to 96kHz/24bit and uses XLR connectors for AES/EBU output. The AE-4D is a compact converter that mutually converts AES/EBU signals and 4-channel Dante signals. With half the size of a standard 1U rack, the AE-4D is suitable for different Dante systems as an exquisite AES/EBU input/output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. AE-4D supports up to 96kHz/24bit and uses XLR connectors for AES/EBU output. The AE-4D is a simple converter that converts 4-channel AES/EBU input signals into 4-channel Dante output signals, or 4-channel Dante input signals into 4-channel AES/EBU input signals.  

Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. The ML-4D/OUT-E is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-E supports up to 96kHz/24bit and uses Euroblock connectors for analog line output.  

Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. The ML-4D/OUT-X is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-X supports up to 96kHz/24bit and uses XLR connectors for analog line output.  

Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. The MM-2D-E is a compact converter that converts 2-channel mic/line input/output signals into Dante signals. With half the size of a standard 1U rack, the MM-2D-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-2D-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input/output.  

Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. The MM-2D-X is a compact converter that converts 2-channel mic/line input/output signals into Dante signals. With half the size of a standard 1U rack, the MM-2D-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-2D-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input/output.  

Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. The MM-4D/IN-E is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input.  

Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. The MM-4D/IN-X is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input.  

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR analogue input in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR analogue input in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and two AX series XLR analogue inputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and two AX series XLR analogue inputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR AES3 input, and one AX series XLR AES3 output connectors in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR AES3 input, and one AX series XLR AES3 output connectors in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one standard USB connector in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one standard USB connector in a molded housing.

• Easy audio drop-point for laptops in conference settings, no need to reconfigure your Dante network for different computers
• Record and playout 2-channel audio simultaneously from any PC, Mac or a Linux-based computer with no additional software at all
• Connect mobile devices to a Dante network with appropriate USB adapters (powered or unpowered Lightning to USB Camera Adapter for iOS devices, and USB On-the-Go (OTG) compliant adapter for Android devices)

The DT168 provides 16 microphone preamps and 8 line outputs in a convenient stagebox form factor. Ideal for portable applications thanks to its rubber bumpers and handle, it can be deployed on stage or used as a drop-in expander in any SQ or dLive Dante network.

DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation. The reversible mounting frame allows for in-wall or on-wall mounting. DT164-W offers the acclaimed Allen & Heath preamps, complete with 96kHz converters for best-in-class sound quality over Dante, plus Primary and Secondary ports for daisy-chain or redundancy through secure EtherCon connectors.

The Dante 128x128 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 128 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording of up to 64 channels via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features

The Dante 64x64 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 64 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features

The Lab.gruppen D 10:4L combines 1000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications. The Lab.gruppen D 10:4L combines 1000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications.

planet 22x is a revolutionary new audio interface that combines the most modern networking audio technology based on the popular Dante protocol with the requirements of a professional high end desktop recording audio interface in studio and in mobile environments. planet 22x is a revolutionary new audio interface that combines the most modern networking audio technology based on the popular Dante protocol with the requirements of a professional high end desktop recording audio interface in studio and in mobile environments. The audio interface is equipped with ultra high quality 24-bit / 96kHz AD converters with 118dB(a) dynamic range and 24-bit / 96kHz DA converters with 123dB(a) dynamic range. The two balanced analog line inputs can also be used with the integrated ultra low noise and precise professional microphone preamplifiers and the special Hi-Z instrument input stages. The balanced master line output can be controlled with a high precission master level step-potentiometer, plus there is a high quality headphone amplifier on the unit. planet 22x can be powered either via an included 12V DC power supply or via the network cable as a PoE (Power over Ethernet) device. This makes it possible to use the interface even when there is no power outlet close by. By supporting Dante, planet 22x combines and works with any other Dante devices in an IP audio network, which makes it also a cost effective solution to extend any existing network with additional audio channels, yet it has also been designed to be a flexible professional audio interface using the Dante Virtual Soundcard for any modern recording applications on both Mac and PC - in any professional studio environment. Features

• Dante network audio interface with 2 analog inputs and 2 analog outputs
• 2 balanced XLR / TRS combo inputs
• 2 balanced XLR outputs
• high end 24-bit / 96kHz AD converters with 118dB(a) dynamic range
• high end 24-bit / 96kHz DA converters with 123dB(a) dynamic range
• per channel professional low noise microphone preamplifiert with adjustable gain
• +48V phantom power for connected microphones
• per channel high quality Hi-Z instrument input stage
• precise step-potentiometer to control the master output level of the line outputs
• high quality adjustable headphone output
• 12V DC power supply included
• power supply via network cable possible (PoE / Power over Ethernet)
• license of the Dante Virtual Soundcard for Mac / PC included
• supports Windows 7, Windows 8.1 and Windows 10 with WDM and ASIO 2.0
• supports macOS via CoreAudio
• includes license of Deckadance LE from Stanton
• includes Bitwig Studio 8-Track digital audio workstation software
• dimensions roughly 17.5cm x 12.0cm x 4.5cm

With an open-architecture design, twelve acoustic echo cancellers (AEC), 16 x 16 Dante® connectivity, and flexible signal processing, the ControlSpace EX-12AEC conferencing signal processor provides robust expansion for conference rooms using the ControlSpace EX-1280C processor. With an open-architecture design, twelve acoustic echo cancellers (AEC), 16 x 16 Dante® connectivity, and flexible signal processing, the ControlSpace EX-12AEC conferencing signal processor provides robust expansion for conference rooms using the ControlSpace EX-1280C processor. ControlSpace Designer software simplifies the setup process with intuitive drag-and-drop programming and conference-specific software tools that help reduce installation time and on-site errors. Features

• Channel AEC expansion with multiple references to complement ControlSpace EX-1280C processors in larger systems
• Adaptable noise cancellation with non-linear processing and comfort noise on each AEC channel enhances clarity
• Dante audio networking supports 16 x 16 audio channels for connection to an EX-1280C processor and native Dante-integrated microphones
• Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity

Applications

• Boardrooms
• Large conference rooms
• Distance learning
• Multi-purpose spaces
• Divisible Conference Rooms
• Operations Centers

The APB-112 OW-D is an active, on wall AudioPressBox unit with 1 channel DANTE input and 12 LINE/Mic outputs. The DANTE-enabled on wall unit features 1 channel DANTE input with high quality digital to analog converter. Powered via PoE from DANTE-network. The unit has 12 balanced, individually transformer isolated Line/MIC outputs. The unit is powered only via PoE from DANTE network. This is a PoE level 3 device

MIMO4040DN is a digital matrix with native processing of 40 inputs and 40 outputs (8 analogue inputs, 8 analogue outputs, 32 Dante™ inputs and 32 Dante™ outputs). MIMO4040DN is a digital matrix with native processing of 40 inputs and 40 outputs (8 analogue inputs, 8 analogue outputs, 32 Dante™ inputs and 32 Dante™ outputs). Incorporating audio over IP technology, MIMO4040DN allows signal transmission using a Local Ethernet network. It features accessories from WPNET Series connected by Ethernet. MIMO4040DN is also capable of executing EclerNet projects thanks to its processor acting as a UCP server. Dimensions 482,6x44x266,5mm. Weight 3.25 kg

Ecler PAGENETDN is a desktop paging console for voice notices with Dante™ audio over IP.  Ecler PAGENETDN is a desktop paging console for voice notices with Dante™ audio over IP. Features a 10” touch screen, a server client and a UCP server (User Control Panel). Since it’s a server/UCP client device, it’s possible to add other kind of control panels beside the ones destined for voice messages such as: volume control, sound source selection, presets recovery, communication via TCP/UDP with external devices, etc. Power over Ethernet or local power supply. Gooseneck microphone included. 

The 9821EMR-AG-HUB is a 1RU platform that is optimized for operation in 10GbE and 25GbE IP SDVN environments, supporting SMPTE ST 302M, AES67*, TDM, MADI and DANTE (up to 512x512 channels of Dante).  The 9821EMR-AG-HUB is a 1RU platform that is optimized for operation in 10GbE and 25GbE IP SDVN environments, supporting SMPTE ST 302M, AES67*, TDM, MADI and DANTE (up to 512x512 channels of Dante). With TDM connections it can externally support AA, AES, EQX embedded audio, HYDRA2 and ALINK. The 9821EMR-AG-HUB provides a gateway to link IP infrastructures with discrete audio IO directly and by using any of the existing Evertz TDM enabled Audio interfaces. It has a number of functional use cases including translating between AoIP standards including SMPTE ST 302M, AES67* and Dante, for audio bridging between devices supporting SMPTE ST 302M or AES67* to a common core IP audio format. AES67 to AES67 for profile grooming*. Bulk audio connection between audio systems such as connecting multiple mobile broadcast vehicles that are using EMR audio router modules.

The 9821EMR-AG-HUB is a 1RU platform that is optimized for operation in 10GbE and 25GbE IP SDVN environments, supporting SMPTE ST 302M, AES67*, TDM, MADI and DANTE (up to 512x512 channels of Dante).  MDi Series is the newest solution from RAM Audio for fixed installations, where state-of-the-art amplification technology has been used to manage acoustic systems in the most efficient and greenest way possible, without diminishing quality of sound and dynamics that have always typified RAM Audio amplifiers. A new generation of QuantaPulse switching mode power supplies with Power Factor Correction to improve efficiency, with a schematic thought to give a very high capacity of instantaneous power, together with very evolved high efficiency audio modules in class D with an excellent quality of sound, are the basis on which RAM Audio has developed this new series that is capable of offering the most optimal solution to the very exigent fixed-installations market. Series models:

• MDi2-1K4
• MDi2-2K7
• MDi2-6K
• MDi4-2K4
• MDi4-6K
• MDi4-12K
• MDi8-2K7
• MDi8-6K

The AMP203 is a revolutionary small amplifier, featuring network input through Dante providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency, while allowing all other data to be connected on the same network. The AMP203 is a revolutionary small amplifier, featuring network input through Dante providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency, while allowing all other data to be connected on the same network. It features various DSP functionalities, including Low-pass, Band-pass and High-pass filters. All configurations can be made via RS485 and Ethernet. The output connector has been implemented using a 4-pin terminal block connector, featuring an output power of 30W per channel and 60W when bridged. Using PoE (Power over Ethernet) the amplifier receives both power and signal through a single networking cable, this way flexibility is maximized while needed cabling is kept at a minimum. The compact convection cooled enclosure eliminates any humm or buzz otherwise caused by a fan. Various optional mounting brackets are available making it ideal for mounting under a desk, in a closet or on the wall, 19” rack mounting hardware is available as well.