Neutrik – NA2-IO-DPRO


More details

Similar Products

audioscience-8-8m_1200px
  • AudioScience

AudioScience – Iyo 8.8M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8M provides 8x8 balanced analog audio inputs and outputs. The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8M provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status. The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller. Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack. All units can also be operated in AES67 interoperability mode.
    I/O Interfaces
s-track_logo
  • S-Track

S-Track – Ostrich D1616

Ostrich series of products is an audio interface device based on Dante international general protocol. It can realize analog audio signal input, convert to digital audio signal output, route to any Dante audio transmission network device by Dante protocol, and realize high quality, long distance and low delay signal transmission. It supports the access of any Dante network digital audio, which can be converted into analog audio signal output, and can be connected to traditional analog audio devices such as mixer, power amplifier, processor and so on. The device uses high quality AD/DA signal conversion chip, provides 48 V of phantom power supply, and can access higher quality capacitive microphone.

    I/O Interfaces
  • infobit

iTrans DB22

  • Two-channel Bluetooth audio to Dante® 2CH digital audio
  • Supports Bluetooth V5.1, SBC/AAC/APTX/APTX-LL/APTX-HD, up to 192KHz@24bit
  • Dante® audio sampling rate supports 48KHz@24bit
  • Dante® audio delay supports 1/2/5ms (configurable)
  • Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)
  • Compact design for easy and flexible installation
  • Supports Bluetooth ID renaming.
    I/O Interfaces