Relacart – MAS-D

The 5401CS is a push-to-talk switch only digital microphone station. It is a network appliance with a unique IP address that requires no configuration.  Just likeAtlasIED’s other digital microphone stations, the 5401CS uses a single Ethernet interface for audio and control data.  The 5401CS is fully compatible with IEEE 802.3af standard for Power over Ethernet (PoE), allowing the microphone station to be powered directly from any standard off-the-shelf PoE switch.The 5401CS utilizes Dante™ technology for transporting high-quality, low-latency digital audio over Ethernet. The 5401CS microphone station may be used as part of an EN54-16 listed life safety system; although the mic stations themselves are not EN 54-16 listed and cannot be used for the emergency locations.  Instead, in a dual-use system, these microphone stations may be used for everyday paging functions.

Access Point Transceiver with 4 or 8 wireless audio channels for use with MXW neXt wireless transmitters. Features:

• Analog, Dante, and USB-C audio connections.
• Built-in IntelliMix DSP audio processing with automatic mixing, echo cancellation, noise reduction, automatic gain control, and EQ.
• Automatic Frequency Management scans the spectrum, selects a clear channel, and automatically changes channels if interference is expected.
• Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation.
• Dual RJ45 connection enable 3 network operation modes - Switched, Split, or Redundant.
• The supplied mounting plate and paintable cover allow discreet placement on the ceiling or wall in boardrooms and conference rooms where low visibility is preferred.
• Two-way wireless transmission allows for remote control of audio and transmission of a secondary program audio to each transmitter.
• Multiple units can be combined to support configurations of up to 40 compatible channels and 80 in Europe and select countries (double in HD mode).
• Supports standards-based security protocols to manage access and protect data, including 802.1x, secure boot/storage, and AES encryption for wired and wireless control and audio data.
• Selectable RF output power to allow optimize spectrum usage by selecting the appropriate wireless output power for the desired operating range.
• Diagnostic LEDs offer easy visual reference to system activity and indicate power, wireless connection, and network audio status.
• A CUI can be accessed on a PC connected to the same network enabling access to all device properties for optimization and user specific settings.

With audio networking a key requirement for many users, the 3000 Digital Series receiver is Dante-enabled and ready to slot into any Dante network. Up to five ATW-DR3120DAN dual-channel receivers can be connected to allow a single pair of antennas to feed up to 10 channels of wireless, reducing the rack space required and minimising cost. Control of the system is made straightforward via software monitoring that gives access to frequency co-ordination, charging status and log display information.