Dante-enabled Product Catalog

The KRX202 is composed of two KX12 speakers coupled with a pair of KMT18 18" subwoofers and includes an extendable pole and proper joining and stacking hardware. The KRX202 is composed of two KX12 speakers coupled with a pair of KMT18 18" subwoofers and includes an extendable pole and proper joining and stacking hardware. Delivers maximum SPL, very low frequency and best bass response. Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup.  

KR802 features a pair of KMT218 dual 18" subs each with 2 channels of 2500 W matched to two KY102 with 4" Neodymium speaker elements. With the portable KR802, K-array has developed its most advanced self-powered, portable amplification system ever. KR802 features a pair of KMT218 dual 18" subs each with 2 channels of 2500 W matched to two KY102 with 4" Neodymium speaker elements. KR802 is a self-powered amplification system featuring two channels of class D amplification housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol also on an XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.  

KR402 audio system features a pair of KMT21 21" subs each with 2 channels of 2000 W matched to two KP102 with 3. 15" Neodymium speaker elements. KR402 audio system features a pair of KMT21 21" subs each with 2 channels of 2000 W matched to two KP102 with 3. 15" Neodymium speaker elements. KR402 Mark I features two channels of class D amplification, housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.  

KMT218P is much more than a standard dual 18" powered subwoofer. It's a high performance sub-bass system designed for medium-large throw applications, like theaters, clubs, concert halls, portable and permanent AV installations. KMT218P is much more than a standard dual 18" powered subwoofer. It's a high performance sub-bass system designed for medium-large throw applications, like theaters, clubs, concert halls, portable and permanent AV installations. KMT218P features two 800 watt 18"drive units with magnet structure engineered for maximum linear excursion. The KMT218P is designed to be powered by KMT218 Speakon output and to be easily integrated with KY102 mid-high speakers.

The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations. The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations. The amplifier mounted on board is class D, delivering 2 x 1000 W at 8 Ω. The KMT18 I features an integrated touch screen, providing intuitive control over the main DSP functions: input/output levels, signal routing, offset delays for subwoofer and speakon output (up to 12 ms) and overall system delay (up to 330 ms). All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The KMT series provides two balanced analog line level inputs and a two-channel AES/EBU digital input. An integrated class D amplifier delivers 2 x 1000 W at 8 Ω, with a max THD of 1% (EIAJ test @ 1kHz). The KMT18 I features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including mid-high models (KK52, KK102) or additional passive subwoofers (KMT18P). To optimize performance, the on-board DSP includes up to 40 programmable presets. The unique four-corner port configuration provides symmetrical back loading to the speakers, for extended bass response with very low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread mount position for attaching mid-high speakers makes the subwoofer convenient to use and ideal for medium throw applications in theaters, concert halls, and Audio/Video installation

Easily transportable system featuring digital steering for outdoor venues with noise restrictions and space limitations Easily transportable system featuring digital steering for outdoor venues with noise restrictions and space limitations Readily adaptable and distinctively discreet for different applications at mid-size venues Exceptionally high performance with a peak SPL of 138dB  

KR202 is a portable PA sound system featuring a pair of KMT18 18" subwoofers each with 2 channels of 1000 W matched to two KK102, line array speakers with 16 x 2" neodymium magnetic transducers. KR202 is a portable PA sound system featuring a pair of KMT18 18" subwoofers each with 2 channels of 1000 W matched to two KK102, line array speakers with 16 x 2" neodymium magnetic transducers. All the systems feature two channels of class D amplification housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.

KR102 features a pair of KMT12 12" subs each with 2 channels of 1000 W matched to a KK102 loudspeaker with 16 x 2" Neodymium speaker elements. KR102 features a pair of KMT12 12" subs each with 2 channels of 1000 W matched to a KK102 loudspeaker with 16 x 2" Neodymium speaker elements. The KR102 features two channels of class D amplification housed in the subwoofer, where you can also find input for a balanced line signal, balanced microphone signal with phantom power AES/EBU protocol and XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.

KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485 on a standard XLR. To optimize performance, the onboard DSP includes presets to drive K-array speakers. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.

KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  

The KH5SYS6 is a compact solution that saves space along with transportation costs for stadium venues and large events. The KH5SYS6 is a compact solution that saves space along with transportation costs for stadium venues and large events. KH5SYS6 is an intelligent solution that provides continuous, even coverage for large venues.

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches.   The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches. One cable does it all. A single CAT-5e or CAT-6 can carry both the audio signal (two-channel AES/EBU) and the data to manage all the devices in the network with the K-framwork software. Dante is an uncompressed, multi-channel networking technology that allows to transmit digital audio and data across standard IP networks.

V-Page provides facility-wide intelligent paging using Dante audio networks. The configuration of your paging network, such as Q-Sys, is completely programmable using the software in the DSP system. This includes zone assignments, button and light behaviors and zone priorities. Each V-Page station includes user-programmable illuminated buttons, microphone input, and level control. An expansion connector allows for an additional 16 illuminated pushbuttons. A single Ethernet cable carries audio, power, and control between the V-Page station and the equipment rack. A facility may incorporate an unlimited number of V-Page stations by simply connecting them to PoE enabled network switches. The VP4 is a four button station with a 5-pin XLR connector and mounting bracket for a push-to-talk microphone. It is intended for use with a coiled cord dynamic microphone (VP4Mic, sold separately).

V-Page provides facility-wide intelligent paging using Dante audio networks. The configuration of your paging network, such as Q-Sys, is completely programmable using the software in the DSP system. This includes zone assignments, button and light behaviors and zone priorities. Each V-Page station includes user-programmable illuminated buttons, microphone input, and level control. An expansion connector allows for an additional 16 illuminated pushbuttons. A single Ethernet cable carries audio, power, and control between the V-Page station and the equipment rack. A facility may incorporate an unlimited number of V-Page stations by simply connecting them to PoE enabled network switches.

VPage provides facility-wide intelligent paging using Dante audio networks. The configuration of your paging network, such as Q-Sys, is completely programmable using the software in the DSP system. This includes zone assignments, button and light behaviors and zone priorities. Each VPage station includes user-programmable illuminated buttons, microphone input, and level control. An expansion connector allows for an additional 16 illuminated pushbuttons. A single Ethernet cable carries audio, power, and control between the VPage station and the equipment rack. A facility may incorporate an unlimited number of VPage stations by simply connecting them to PoE enabled network switches. The VP16PCB is the circuit board only, for mounting in custom PA stations.

With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities. With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities. The Hear Back PRO system consists of two main components: the Hub and the Mixer. The Mixer is not a standalone product. The Hear Back PRO boasts many key advantages, including:

• Side-mounted card slot on Mixer for future expansion
• Large master knob controls overall main mix, AUX, and intercom levels independently
• Volume and panning control of all
• 16 channels
• Direct and immediate visual feedback of all 16 channels
• Up to 8 pairs of stereo-linked channels
• Support for sampling rates up to 192 kHz
• Selectable XLR or 1/8” Mixer AUX input
• Built-in intercom broadcasts the AUX source (mic, MP3 player, click, etc.)
• Intercom auto adjusts its own level so even the quietest message never goes unheard
• Modular I/O Hub card system lets you customize the system to match your configuration, and can adapt to your needs
• Supports secondary power supply to provide redundancy and power to up to
• 32 Mixers
• USB port on Hub makes updating firmware for future features and upgrades a simple drag-and-drop operation
• Status indicating logos on Hub and Mixers make it easy to detect and diagnose problems, should they arise
• Write session info and channel settings on storable Mixer overlays for an unlimited number of presets
  • Instantly store and recall presets from memory with the push of a button
  • Most recent configuration is saved, even after power-down 

With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities. With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities. The modular Hub consists of four card slots, which can be populated with any configuration of input and/or output cards to fit your exact needs. Each Hub has the ability to supply signal and power to as many as 32 Mixers (8 per Network Card), each over a single standard CAT5e/6 cable. And with the built-in HBus In/Out ports, multiple Hubs can be daisy-chained together, allowing for truly unlimited system expansion. The standard Hub (included in the “4-pack”) comes pre-loaded with one Network Card and two 8-channel Analog Input Cards which can accept input signals from an audio mixer via auxiliary, matrix, monitor, and/or direct outputs. The Hear Back PRO system consists of two main components: the Hub and the Mixer. The Hear Back PRO boasts many key advantages, including:

• Side-mounted card slot on Mixer for future expansion
• Large master knob controls overall main mix, AUX, and intercom levels independently
• Volume and panning control of all
• 16 channels
• Direct and immediate visual feedback of all 16 channels
• Up to 8 pairs of stereo-linked channels
• Support for sampling rates up to 192 kHz
• Selectable XLR or 1/8” Mixer AUX input
• Built-in intercom broadcasts the AUX source (mic, MP3 player, click, etc.)
• Intercom auto adjusts its own level so even the quietest message never goes unheard
• Modular I/O Hub card system lets you customize the system to match your configuration, and can adapt to your needs
• Supports secondary power supply to provide redundancy and power to up to
• 32 Mixers
• USB port on Hub makes updating firmware for future features and upgrades a simple drag-and-drop operation
• Status indicating logos on Hub and Mixers make it easy to detect and diagnose problems, should they arise
• Write session info and channel settings on storable Mixer overlays for an unlimited number of presets
  • Instantly store and recall presets from memory with the push of a button
  • Most recent configuration is saved, even after power-down 

The NY64-D is an I/O expansion card for TF series consoles that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 48 kHz 24 bit digital audio data via a Dante™ audio network. The NY64-D is an I/O expansion card for TF series consoles that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 48 kHz 24 bit digital audio data via a Dante™ audio network. Used in conjunction with the Tio1608-D I/O it becomes possible to create a versatile stage box system with up to 48 inputs and 24 outputs.

IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that blend into any environment. IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that blend into any environment. Individual driver control maximizes the acoustical advantages of this design. The result is unsurpassed vertical pattern control – essential for delivering intelligible speech in reverberant spaces. IC Live beams can be steered up or down while the array remains vertical – and nearly invisible. IC Live arrays are also powerful. Their 6.5 inch neodymium low frequency transducers and 1 inch throat titanium nitride coated high frequency drivers produce surprisingly high sound levels for their size. They are equally at home delivering a quiet sermon in a reverberant cathedral, cutting through the crowd noise in a gym during a close basketball game or shaking the walls with rock music in a club.

IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that blend into any environment. IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that blend into any environment. Individual driver control maximizes the acoustical advantages of this design. The result is unsurpassed vertical pattern control – essential for delivering intelligible speech in reverberant spaces. IC Live beams can be steered up or down while the array remains vertical – and nearly invisible. IC Live arrays are also powerful. Their 6.5 inch neodymium low frequency transducers and 1 inch throat titanium nitride coated high frequency drivers produce surprisingly high sound levels for their size. They are equally at home delivering a quiet sermon in a reverberant cathedral, cutting through the crowd noise in a gym during a close basketball game or shaking the walls with rock music in a club.

Digitally Steerable Line Array Loudspeaker Systems Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.

•  Dual Redundant Dante Connectivity
• RHAON II Control and Dante audio delivery over the same Dante network connection
• Fifth Generation
• 8x 4" Coaxial Transducers each with three HF tweeters
• 8x Amplifier and DSP channels
• Beam control effective down to 800Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• Slim, Low-Profile Design

ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to four steerable beams can be individually shaped and aimed from a single IC8-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.

Digitally Steerable Line Array Loudspeaker Systems Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.

• Dual Redundant Dante Connectivity
• RHAON II Control and Dante audio delivery over the same Dante network connection
• 3x 4" Coaxial Transducers each with three HF tweeters
• 5x 4" LF/MF Transducers progressively spaced
• 8x Amplifier and DSP channels
• Beam control effective down to 400Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• Slim, Low-Profile Design

ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to four steerable beams can be individually shaped and aimed from a single IC16-8-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.

Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.

• Dual Redundant Dante Connectivity
• RHAON II Control and Dante audio delivery over the same Dante network connection
• 16x 4" Coaxial Transducers each with three HF tweeters
• 16x Amplifier and DSP channels
• Beam control effective down to 400Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• Slim, Low-Profile Design

ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to eight steerable beams can be individually shaped and aimed from a single IC16-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.

Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.

• Dual Redundant Dante Connectivity
• RHAON II Control and Dante audio delivery over the same Dante network connection
• 11x 4" Coaxial Transducers each with three HF tweeters
• 5x 4" LF/MF Transducers progressively spaced
• 16x Amplifier and DSP channels
• Beam control effective down to 250Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• Slim, Low-Profile Design

ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to 8 steerable beams can be individually shaped and aimed from a single IC24-16-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.

Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.

• Dual Redundant Dante Connectivity
• RHAON II Control and Dante audio delivery over the same Dante network connection
• 24x 4" Coaxial Transducers each with three HF tweeters
• 24x Amplifier and DSP channels
• Beam control effective down to 250Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• Slim, Low-Profile Design

ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to 12 steerable beams can be individually shaped and aimed from a single IC24-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.

Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.

• Dual Redundant Dante Connectivity
• RHAON II Control and Dante audio delivery over the same Dante network connection
• 19x 4" Coaxial Transducers each with three HF tweeters
• 5x 4" LF/MF Transducers progressively spaced
• 24x Amplifier and DSP channels
• Beam control effective down to 200Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• Slim, Low-Profile Design

ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to 16 steerable beams can be individually shaped and aimed from a single IC32-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.