Media Vision - MV-ALS-STFM-D

Media Vision – MV-ALS-STFM-D

Product Information

This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems.

This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems. Programming, channel assignments and settings lock, can be done either from the transmitters and receivers with clear OLED display for menu navigation, or from a user-friendly software interface.

Operates on the FCC protected 72-76 MHz FM bandwidth
57 programmable channels with settings lock.
Simultaneous operation of up to 6 channels
Easy integration: balanced and unbalanced inputs, Dante interface
Operating range: up to 1500ft (depending on the antenna).
SNR: 80 dB
Weight: 3.7 lbs.
Dimension: 8.46” X 8.26” X 1.96”
Lifetime warranty

Specifications

Dante Ch: 2x0

Sonifex – AVN-AO16

The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for POE, Link, and Clock.

16 x balanced analogue outputs on XLR.
1 x RJ45 Dante connector (100Mb/s Ethernet Port).
POE, Link, and Clock LED status indicators.
Configuration using Dante Controller.
AES67 operation & Dante Domain Manager compliant.
Powered by PoE.
1U 19” rack-mount form factor.

I/O Interfaces

Dante Ch: 16x0
16-bit, 24-bit, 32-bit

See the product

Relacart

BLOCK 4+

Dante Networked Audio Interface

I/O Interfaces

Dante Ch: 4x4

See the product

Extron Electronics

Extron – AXI 22 AT

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor, and can be powered through PoE.

I/O Interfaces

Dante Ch: 2x2
24-bit

See the product

Media Vision – MV-ALS-STFM-D

Product Information

Specifications

Similar Products

Sonifex – AVN-AO16

BLOCK 4+

Extron – AXI 22 AT

Stay connected to Dante

Support

Company

Dante Networking Alliance