Dante-enabled Product Catalog

With 20 line-level inputs, 16 microphone preamplifiers and playback engine; processing with 31-band GEQ, compressor, gate, delay, polarity; DSP effects; aux buses; subgroups; sensitive LED metering; load/save/copy mixer setting; remote control, USB in and more, the 20.4 LIVE helps you creating a wonderful show. With 20 line-level inputs, 16 microphone preamplifiers and playback engine; processing with 31-band GEQ, compressor, gate, delay, polarity; DSP effects; aux buses; subgroups; sensitive LED metering; load/save/copy mixer setting; remote control, USB in and more, the 20.4 LIVE helps you creating a wonderful show.

• 16 microphone preamplifiers with dedicated trim control
• 20 line-level inputs
• 4 Aux sends and 4 subgroups, or 8 Aux sends
• 2 internal FX
• 1 stereo main out
• All channels Control Room outputs
• 2 headphones output
• USB Stereo recording 
• 100mm precision motor fader
• 7 inch color LCD touch screen for graphical view and setup
• 24-bit/48KHz sampling rate
• Program, save, load & copy functions
• Digital noise gate
• Digital compressor/limiter 
• Digital 4-band full parametric EQ
• PAN
• Phase reverse
• Time delay
• 6 DCA for Digital Control Audio or MUTE
• Lock and unlock function
• Change the password
• Remote Control: Ethernet or USB
• iPad App 20.4i editor for wireless control 
• Expand socket for option module:  Multi-track USB audio recording module or CobraNet module or Dante module etc

The 16 inputs and outputs of the Dark1616 are parallelled in both analogue and AES for maximum flexibility, with the added benefit of huge 127d8 dynamic range analogue to digital converters (DARK1616M). Moving audio from A to B is now more flexible than ever. The Dante system allows audio links over networks to be un-compressed, low latency and reliable. The 16 inputs and outputs of the Dark1616 are parallelled in both analogue and AES for maximum flexibility, with the added benefit of huge 127d8 dynamic range analogue to digital converters (DARK1616M). The Dante Controller software allows simple point to point or point to multipoint routing across a network of DARK1616 units. Glensound adds broadcast grade reliability to the Dante interface with a primary and redundant CATS link, a primary and redundant SFP/fibre link, and a primary and redundant power supply, with loops indicating link & PSU states. 

The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante.  The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs. As well as being mains powered with the standard signature backup DC powering option, the AoIP44 can be powered from an external PoE source via its network interface. The AoIP can be used as a simple low cost audio I/O break out unit on a large Dante audio network where it can be integrated extremely easily using the Dante controller and is fully compatible with any manufacturers Dante equipment. It can also be used in very simple audio over IP scenarios where just 4 bi-directional audio circuits are needed to be distributed across a buildings network infrastructure, in which case 2 x AoIP44 units can be used connected together across the network. The AoIP44 is equally suited for high integrity broadcast purposes, intercom, just simple paging facilities or simple distribution of non-critical audio. Being part of our Signature Range the AoIP44 comes as standard with removable rack ears (to allow front or rear mounting in 19" racks), mounting holes to allow under desk mounting (the holes are equally suited for screwing the unit into odd places!) and an optional external DC power supply for applications requiring redundant power supplies. It is housed in an all anodised aluminium chassis.

Red 4Pre combines four of Focusrite’s digitally-controlled, 'Air' enabled, Red Evolution mic preamps with dual Thunderbolt 2, Pro Tools | HD and Dante network audio connectivity. Red 4Pre combines four of Focusrite’s digitally-controlled, 'Air' enabled, Red Evolution mic preamps with dual Thunderbolt 2, Pro Tools | HD and Dante network audio connectivity. Featuring 'parallel path summing' conversion and beautiful yet robust design, the Red 4Pre interface is the perfect balance of form and function, delivering the sound quality and versatility engineers and producers expect from Focusrite. Focusrite's 58-in/64-out Red 4Pre includes Thunderbolt 2 connectivity for our lowest round-trip latency, in whatever DAW you use, enabling you to track and overdub with your preferred plug-ins and effects in real time, simplifying your workflow. Drop the Red 4Pre immediately, directly and seamlessly into any Pro Tools | HD system, or use it with existing Avid® interfaces, thanks to its twin DigiLink™ connectors. Dual Thunderbolt 2 ports allow daisy-chaining of additional components such as hard drives and displays. Plus the Red 4Pre is network audio enabled right out of the box, with dual Ethernet ports for Dante audio-over-IP networking, letting you expand your recording capability over Ethernet for up to 64 additional channels anywhere on your network, with low latency – and lower cost. Additional Red or other Dante-compatible components can be connected to the Ethernet ports of the Red 4Pre to provide additional channels irrespective of the interface used to drive the Red 4Pre. The Red Evolution mic pres in the Red 4Pre deliver a clear and honest audio performance with –129 dB EIN and 63dB of gain that allows plenty of room to bring your own sound to life with your choice of external processing. The mic pres can be controlled digitally, for adjusting/recalling settings and stereo linking via Focusrite Control software. They also include our unique ‘Air’ effect, recreating the sound of the transformer-based mic preamps in the ISA range. When ‘Air’ is enabled, the microphone impedance is set to 2.1kΩ and the frequency response curve is given a subtle mid-high boost – all in the analogue domain.

This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems. This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems. Programming, channel assignments and settings lock, can be done either from the transmitters and receivers with clear OLED display for menu navigation, or from a user-friendly software interface.

• Operates on the FCC protected 72-76 MHz FM bandwidth
• 57 programmable channels with settings lock.
• Simultaneous operation of up to 6 channels
• Easy integration: balanced and unbalanced inputs, Dante interface
• Operating range: up to 1500ft (depending on the antenna).
• SNR: 80 dB
• Weight: 3.7 lbs.
• Dimension: 8.46” X 8.26” X 1.96”
• Lifetime warranty

Attend Sixteen is a robust a robust all-in-one solution for multichannel video capture, recording and streaming with multiple audio tracks. Attend Sixteen is a robust a robust all-in-one solution for multichannel video capture, recording and streaming with multiple audio tracks. It can be used as a standalone streaming and recording device or used in tandem with the Media Server software and integrate with a CDN for large-scale implementation.

• Audio inputs: 16 channels of digital audio, or 8 channels of analog audio
• Dante-enabled
• 3 DVI-I inputs (2 video, 1 content)
• Onboard recording with 1TB hard drive and USB download
• includes Web Server GUI for control settings

The Attend Sixteen Capture Device seamlessly integrates with any sized media server hardware and existing infrastructure.

Wohler Technologies has been in the business of in-rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise. Flexible. Adaptable. Future Proof. iAM-AUDIO is designed to be easy to operate yet powerful enough to provide high quality, intuitive monitoring of multiple signal types within a compact form factor. iAM-AUDIO is equipped with a variety of metering options and can support Analog, AES3 and MADI inputs with additional options for AoIP formats, including Dante™, Ravenna™ and AES67, 3G/HD/SD-SDI and a growing range of I/O via an SFP interface. High quality touch screen panels allow for elegant and intuitive control, with simple to navigate menus and configuration. Physical front panel controls provide access to main and auxiliary volume controls, balance control and a front mounting USB port for simple software updates. All iAM Series monitors are built with an on-board web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration. With both front mounting speakers and subwoofers, the iAM-AUDIO provides powerful sound output and audio reproduction that adheres to Wohler’s own strict specifications. iAM-AUDIO can be software upgraded to support new and emerging technologies and is the perfect solution for any application that requires a compact unit for monitoring an evolving range of professional signals. FEATURES & BENEFITS:

• Wohler’s renowned sound quality in 1RU form factor.
• Touch screen front panel for intuitive control.
• Built-in speakers, headphone jack, USB and Ethernet ports.
• A range of connectors, including SFP slots for future I/O.
• Store and retrieve presets via USB or remote software control.
• Software upgradable, future-proof platform.
• API for remote control.
• Compact, space-saving unit.

Wohler Technologies has been in the business of in-rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise. Flexible. Adaptable. Future Proof. iAM-AUDIO is designed to be easy to operate yet powerful enough to provide high quality, intuitive monitoring of multiple signal types within a compact form factor. iAM-AUDIO is equipped with a variety of metering options and can support Analog, AES3 and MADI inputs with additional options for AoIP formats, including Dante™, Ravenna™ and AES67, 3G/HD/SD-SDI and a growing range of I/O via an SFP interface. High quality touch screen panels allow for elegant and intuitive control, with simple to navigate menus and configuration. Physical front panel controls provide access to main and auxiliary volume controls, balance control and a front mounting USB port for simple software updates. All iAM Series monitors are built with an on-board web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration. With both front mounting speakers and subwoofers, the iAM-AUDIO provides powerful sound output and audio reproduction that adheres to Wohler’s own strict specifications. iAM-AUDIO can be software upgraded to support new and emerging technologies and is the perfect solution for any application that requires a compact unit for monitoring an evolving range of professional signals. FEATURES & BENEFITS:

• Wohler’s renowned sound quality in 1RU form factor.
• Touch screen front panel for intuitive control.
• Built-in speakers, headphone jack, USB and Ethernet ports.
• A range of connectors, including SFP slots for future I/O.
• Store and retrieve presets via USB or remote software control.
• Software upgradable, future-proof platform.
• API for remote control.
• Compact, space-saving unit.

32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements. Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Features:

• nXp Series available in either 2 or 4-channel models.
• Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation.
• When in Sleep Mode, the nX amplifiers draw less than 1 Watt.
• They are the networkable version of the nX amplifier with the addition of Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability.
• Has 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking.
• Precision load impedance monitoring on each amplifier channel output. All controlled using our proprietary Protea™ Software Suite.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.

The application of Matrix System contains both hardware and software, using host Matrix A8 as the control center, the whole function of this system is as below:

• The basic system offers a total of 12 IN x 12 OUT without the Dante option.
• I/O expansion is possible with 16pcs devices linked together for a maximum of 192 x IN and 192 x OUT.
• With remote paging MIC RPM-200, can control paging in different zones.
• With remote volume control RVA-200 or RVC-1000, can control volume in different zones.
• Use different data line for audio signal and control signal RIO-200, which can avoid their conflict and increase their reliability.
•  Transfer audio signal based on AES/EBU transfer protocol, while transfer control signal based on RS-485 transfer protocol.
• 8 analogue IN / 8 analogue OUT via local ports
• 4 digital IN / 4 digital OUT via local ports to analog panel I/O
• 8 digital IN / 8 digital OUT via DANTE optional card

You might also be interested in the Matrix DB. It has the same features as the A8 but with 12 digital IN / 12 digital OUT and no analogue IN or OUT.

FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network. FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.

PA−150NET is a high−performance amplifier with both Dante™ and local inputs.  PA−150NET is a high−performance amplifier with both Dante™ and local inputs. This amplifier is built to power demanding professional and commercial audio installations that use the Dante digital media transport system. Its dual−input capability with its priority switch makes this amplifier a versatile and handy tool for many applications.

• Inputs - Dante network source, balanced line level mono audio.
• Outputs - 70V/100V speaker, unbalanced line level mono audio.
• Output Power - 50W into one channel.
• Controls - Line Level and remote volume/mute.
• Priority Setting Switch - Net or local.
• Auto Standby.
• Safety - Conforms with UL 2043 heat and smoke release for plenum−rated environments.
• Size - Compact TOOLS - Part of the Kramer TOOLS Family of compact high-quality and cost-effective solutions.

PA−225NET is a high−performance amplifier with both Dante™ and local inputs. PA−225NET is a high−performance amplifier with both Dante™ and local inputs. Its dual−input capability with its priority switch makes this amplifier a versatile and handy tool for many applications.

• Inputs - Dante network source, 2 balanced line level stereo audio.
• Outputs - Unbalanced line level stereo audio, speakers.
• Output Power - 2 x 35W @4Ω, 2 x 25W @8Ω.
• Controls - Line Level and remote volume/mute.
• Priority Setting Switch - Net or local.
• Auto Standby.
• Safety - Conforms with UL 2043 heat and smoke release for plenum−rated environments.
• Size - Compact TOOLS - Part of the Kramer TOOLS Family of compact high-quality and cost-effective solutions.

The KH3 is a revolutionary compact line array element for medium scale events in stadium, arenas, concert halls and theaters. The KH3 is a revolutionary compact line array element for medium scale events in stadium, arenas, concert halls and theaters. 2 x 12" Neodymium magnet-woofer with 2 . 5" voice coil and 1 . 4" compression drivers with a 2 . 5" voice coil each. The KH3 is a medium to large format speaker with the ability to drive sound further, ensuring exceptionally high performance with a peak SPL of 138 dB.  

The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors. The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors. The KA84 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories. An onboard library preset with K-array speaker gives an optimal and easy configuration for endless combinations. All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector.  

The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels. The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel.  The KA24 is usable as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories. All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector. The KA24 features optical limiters an protection against over temperature, over current and short circuits.  

I/O Rack for Yamaha Rivage PM10 System

The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware. The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware. Delivers maximum SPL, very low frequency and best bass response Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup

The KRX402 is composed of four KX12 line array elements paired with two KMT21 Mark I  21" subwoofers and includes an extendable pole and dedicated hardware for joining, stacking and flying the system. The KRX402 is composed of four KX12 line array elements paired with two KMT21 Mark I  21" subwoofers and includes an extendable pole and dedicated hardware for joining, stacking and flying the system. Delivers maximum SPL, very low frequency and best bass response. Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup.