Ecler - DN44BOB

Ecler – DN44BOB

Product Information

ECLER DN44BOB is a 4 inputs and 4 outputs DANTE Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals.

ECLER DN44BOB is a 4 inputs and 4 outputs DANTE (Audio Over IP) Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals. It includes 4 GPI control ports (0-10VDC) and 4 GPO control ports (NO/NC relays). Can be used together with EclerNet DANTE ready products or as a stand-alone DANTE interface, together with any audio device including analogue audio inputs and/or outputs.

Specifications

Dante Ch: 4x4
Bit Depth: 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz
AES67 Enabled

Neutrik – NA2-IO-DLINE

This ruggedized handy box lets you connect your legacy audio gear to the Dante™ world. It works both as a ramp-on device to convert an analog LINE signal into a Dante™ signal and as a ramp-off box to come out of the Dante™ network with an anlog signal. Both can happen siumultaneously! The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante™ network. Simultaneously, NA2-IO-DLINE converts a Dante™ stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante™ network while at the same time receiving a mix from another Dante™ source. NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

I/O Interfaces

Dante Ch: 2x2
16-bit, 24-bit, 32-bit

See the product

Focusrite

Focusrite – RedNet 6

RedNet 6 provides the link between your RedNet Ethernet-based audio system and any MADI / AES10 setup. RedNet 6 supports up to 64 channels of both coaxial and optical MADI interfaces and is completely bi-directional: use RedNet’s high quality interface products with your MADI system – or MADI components with your RedNet system. RedNet 6 features an asynchronous sample rate converter (ASRC) on each input and output so you can interface between MADI and RedNet irrespective of the sample rate at which either system is operating.

I/O Interfaces

See the product

Extron Electronics

Extron – AXI 02 AT

The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. This Dante Audio Interface provides two channels of audio output from the network to devices without Dante connectivity. It features two line level analog outputs on captive screw connectors with a mirrored two-channel S/PDIF output on a coaxial RCA connector. The AXI 02 AT interfaces with a Dante audio network over a standard local area network, and is powered through PoE. The AXI 02 AT includes a ZipClip® 100 Mounting Kit and is compatible with Extron Rack Shelves and ZipClip 200 mounting solutions.

I/O Interfaces

Dante Ch: 2x0
24-bit

See the product

Ecler – DN44BOB

Product Information

Specifications

Similar Products

Neutrik – NA2-IO-DLINE

Focusrite – RedNet 6

Extron – AXI 02 AT

Stay connected to Dante

Support

Company

Dante Networking Alliance