Cart
← Back to Product Catalog

DARK 22M

I/O Interfaces

More Details

Similar Products

monacor-international-dsm-48dt_1200px
  • Monacor

Monacor – DSM-48DT

Due to the Dante™ interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante™ audio network. Both of the Dante™ signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Due to the Dante™ interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante™ audio network. Both of the Dante™ signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Thus, the DSM-48DT allows you to receive one stereo audio signal or two mono audio signals from other Dante™-enabled devices which are located in the same subnetwork and to process this/these in the same way as an analogue signal or AES/EBU signal. Speaker management systems featuring analogue inputs as well as outputs and additionally provide a Dante™ interface are called Breakout Boxes. In order to use the DSM‑48DT as a receiver unit, it has to be connected to at least one Fast Ethernet switch (100 Mbps Ethernet).
    I/O Interfaces
See the product
ru-nfd_400px
  • RDL

RDL – RU-NFD

The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. Model RU-NFDP operates from PoE. The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts up to three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products. The RU-NFD provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-NFD is also available in a PoE version (RU-NFDP). If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
leonis-AES367
  • Leonis Cinema

Leonis Cinema – AES367

AES367 is a bridge between AES/EBU and AOIP, it can convert 16-channel AES/EBU balance input into AES67 signal and reversely. AES367 is a bridge between AES/EBU and AOIP, it can convert 16-channel AES/EBU balance input into AES67 signal and reversely. It supports 32 kHz to 192 kHz sample rate, and the sample depth can reach up to 24 bit. It has a very low jitter clock recovery mechanism ,and the data is in accordance with AES3 and AES67 interface standard.
    I/O Interfaces
See the product