Cart
← Back to Product Catalog

Monacor – DMIX-20DANTE

I/O Interfaces

More details

Similar Products
  • Glensound

DARK 22M

The DARK22M is a bi-directional USB to Dante converter. This will happen in parallel to the analogue audio connections. It can also be set as a bi-directional USB to analogue converter. The addition of USB C adds A useful options. Where the DARK22M sets itself apart is in audio performance. it started life as the DARK8MAI. This means the resources of the DARK8MAI are still available. Glensound was able to utilize these ADC channels in a rather clever way. By sending each input equally across 4 x ADC inputs, then combining them in the ADC. When you divide by four, you end up with the same level, but the noise cancels out, resulting in a much improved signal to noise ratio and dynamic range. This resulted in the mic inputs on the DARK 22M being just about the cleanest and brightest of any network mic amp available.
    I/O Interfaces
  • Dante Ch: 2x2
  • 44.1kHz
See the product
  • Turtle AV

Dante 2CH Bluetooth Input Adapter

Dante 2CH Bluetooth Input Adapter
  • Two-channel Bluetooth audio to Dante 2CH digital audio
  • Supports Bluetooth V5.1, SBC/AAC/APTX/APTX-LL/APTX-HD, up to 24bit/192KHz
  • Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit
  • Configurable Dante audio delay with support for 1, 2, or 5 milliseconds
  • Analog audio input with support for 5-level gain adjustment
  • PoE and USB-C power options
  • TAA compliant
  • Made from 90% recycled plastic, including 5% Ocean Bound Plastic
    I/O Interfaces
  • Dante Ch: 0x2
  • 16-bit, 24-bit
See the product
0114853_unterputzanschluss-mit-35mm-klinkenbuchse-inp
  • promedias

promedias – proDT 3.5/CI UP

Flush-mounted connection with 3.5mm jack input & 2x cinch sockets input to Dante

  • AES67 & DDM ready!
  • 4x0 LINE IN (3.5mm Stereo/Cinch Stereo female)
  • PoE / 5VDC Input
  • Stereo L+R DANTE® Broadway
  • Sample Rate: max. 192kHz | Latency: min. 0.25ms
  • Network Speed: 1Gb/s / 100Mb/s
  • Dimensions: Gr. I+I (1x2/2x1) - 148x88x59mm bzw. 50mm
  • Installation dimensions: 120x67x44mm bzw. 120x60x44mm (cutout x depth)
  • Color: black (Feller 60), similar to RAL 9005 (also available as standard, e.g. white 61 or option RAL/NCS colour!)
    I/O Interfaces
See the product