VUE Audiotechnik – al-8


More details

Similar Products

2017323161012
  • BARE

BARE – BR-10G8

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

    Speakers
K-array_-_KMT21_Mark_I_425pxl
  • K-array

K-array – KMT21 Mark I

KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
    Speakers
monisms-MNS-8A11WS-1P
  • MONISMS

MONISMS – MNS-8AXXWS-1P

The MONISMS MNS-8AXXWS-1P [MONISMS Model:MNS-8A11WS-1P / MNS-8A12WS-1P / MNS-8A22WS-1P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments.


MNS-8AXXWS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.

[Model:MNS-8A11WS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-8A12WS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-8A22WS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

    Speakers