Dante-enabled Product Catalog

A 2U 19inch rack mounted Dante monitoring and diagnostic unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz).  A 2U 19inch rack mounted Dante monitoring and diagnostic unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz). The signals are presented to the user via the inbuilt 75mm full range speakers which are mounted in optimised ported cabinets for a high quality sound or the via the 6.35mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RD Dante. The RD Dante is operated and controlled via the large 5.0” diagonal (127mm) 24bit colour LCD and capacitive touch panel. A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RD Dante very quickly. The high resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.  Firmware updates of the RD Dante are achieved via a dedicated USB B connector on the front panel. There is also a dedicated 6.35mm jack socket for the headphone output and a 6.35mm jack socket to input a line level source such as an iPod etc.

Monacor's DADC-144DT is a 4-channel Dante® transceiver. Monacor's DADC-144DT is a 4-channel Dante® transceiver.

• 4 analogue XLR audio inputs
• 4 analogue XLR audio outputs
• 4-channel Dante® input/output (EtherCon/RJ45)
• Analogue input and output levels can be adjusted individually via recessed potentiometers
• 48 V phantom power can be activated as required for each analogue input
• Mute function for each analogue output
• Dante® sources and Dante® receiver can be combined via software
• Encoding/decoding: 16/24/32 bits
• Sampling rates: 44.1/48/88.2/96 kHz
• Frequency range: 20-20,000 Hz
• LED display for indicating signal, peak, network link, network act and power
• Metal housing
• 482 mm (19") rack installation, 1 RS

Monacor's IT-400DT is a weatherproof active horn speaker (music horn), 2-way technology. Monacor's IT-400DT is a weatherproof active horn speaker (music horn), 2-way technology.

• With integrated Dante® module and DSP
• DSP-controlled 20 W amplifier
• Power supply via PoE (Power over Ethernet)
• Weatherproof and IP66 certified
• Very wideband sound with a distinct bass volume, even at very high volume levels
• 16 cm bass-midrange speaker and 25 mm (1") horn
• Robust plastic housing
• Supplied with mounting bracket and screws made of stainless steel

The TouchMonitor TM9 offers a new level of audio metering with a 9" touch screen. The TouchMonitor TM9 offers a new level of audio metering with a 9" touch screen. Now with Dante™ AoIP, including AES67 mode, up to 32 channels of audio and redundant network support.

• TM7 and TM9 with Dante AoIP, including AES67 mode
• Up to 32 channels of audio to be monitored
• Redundant network support

The new level The all-new audio metering units of the TouchMonitor range is RTW‘s answer to growing requirements in today‘s production, post-production, and broadcast world. Equipped with high-grade 7“ or 9“ touch screens and an easy-to-use GUI, TouchMonitor enters a new level of professional audio metering in terms of precision, performance, efficiency and flexibility. Simple and flexible The graphical user interface used in the TouchMonitor TM9 is controlled simply by using your finger or a mouse. Instruments can be scaled, randomly positioned and combined in almost every way for optimized use of available screen space. Even multiple instruments of the same type, assigned to different input channels and configurations, can be displayed simultaneously. Plus, a context-sensitive, on-screen help feature supports the user, allowing him to make setup changes with ease.  Expanded basic software and instruments The latest firmware version expands the basic software to 4-channel display, 4 x Mono, 2 x Stereo, 2 x Mono and 1 x Stereo can be measured without the need of an activated Multichannel licence. RTA provides a 1/12-octave mode, Cinema Loudness standards (LEQ(M), TASA, SAWA) have been implemented, and the Audio Vectorscope instrument allows up to 4 instances. The output routing can individually be adjusted for each preset, all presets can be exported or imported at the same time. Further details can be found in the Release Notes (included in the update package), or in the data sheet.

The TouchMonitor TM7 offers a new level of audio metering with a 7" touch screen. The TouchMonitor TM7 offers a new level of audio metering with a 7" touch screen. Now with Dante™ AoIP, including AES67 mode, up to 32 channels of audio and redundant network support.

• TM7 and TM9 with Dante AoIP, including AES67 mode
• Up to 32 channels of audio to be monitored
• Redundant network support

Space-saving For environments where space is an issue, an audio metering unit of the TouchMonitor TM7 series is the ideal choice. Combining the simple and flexible operational concept and GUI of the TM9 with a 7" high-grade touch screen, the TM7 lets you configure the instruments of your choice with ease. Instruments can be scaled, randomly positioned and combined for optimized use of available screen space. The modular software concept lets you purchase exactly the features you actually require.  Different Housings Beside the table-top version of TouchMonitor TM7 an OEM version is available for mounting TM7 into mixing consoles or other front panels. It can also be combined with mounting adpaters for a seamless integration into 19"/3U standard racks or into standard 19" rack-mount cabinets for waveform monitors for video studios. Expanded basic software and instruments The latest firmware version expands the basic software to 4-channel display, 4 x Mono, 2 x Stereo, 2 x Mono and 1 x Stereo can be measured without the need of an activated Multichannel licence. RTA provides a 1/12-octave mode, Cinema Loudness standards (LEQ(M), TASA, SAWA) have been implemented, and the Audio Vectorscope instrument allows up to 4 instances. The output routing can individually be adjusted for each preset, all presets can be exported or imported at the same time. Further details can be found in the Release Notes (included in the update package), or in the data sheet.

WaveCAST provides true, professional audio quality over WiFi , and features  DSP audio processing.  Setting up and configuring the WaveCAST for the WiFi network is straightforward and simple. Up to four WaveCAST systems can be connected to the same WiFi network to provide multiple listening channels, supporting up to 45 connections in unicast mode, or 200 in multicast mode. WaveCAST provides true, professional audio quality over WiFi , and features  DSP audio processing.  Setting up and configuring the WaveCAST for the WiFi network is straightforward and simple. Up to four WaveCAST systems can be connected to the same WiFi network to provide multiple listening channels, supporting up to 45 connections in unicast mode, or 200 in multicast mode. The WaveCAST audio processor offers multiple preset audio options. The high quality audio can be optimized for hearing assistance, music can have high-fidelity playback, and voice can be set for maximum speech intelligibility. Custom pre-sets can also be created to meet specific performance needs. The new WaveCAST app provides an easy-to-use, intuitive user interface and will be available in iOS or Android. The app allows listeners to easily select their channel and volume level once their personal device is connected to the WiFi network.  

The IPD-XT850 is a premium 2-way outdoor loudspeaker solution for IP-addressable audio networks on the Dante® platform.  The IPD-XT850 is a premium 2-way outdoor loudspeaker solution for IP-addressable audio networks on the Dante® platform. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. The IPD-XT850 is designed for full-range back-ground/fore-ground music and paging. The sealed, in-ground enclosure design delivers true low end response (38 Hz, – 10 dB) and optimal off axis performance. The system is IP55 approved and AES67 compatible. Included accessories: anti-theft brackets, water-tight strain relief.

Symphony I/O Mk II is a multi-channel audio interface featuring Apogee’s newest flagship AD/DA conversion, modular I/O (up to 32 inputs and outputs), intuitive touchscreen display and optional world-class microphone preamps.  Symphony I/O Mk II is a multi-channel audio interface featuring Apogee’s flagship AD/DA conversion, modular, configurable I/O (up to 32 inputs and outputs), intuitive touchscreen display and optional world-class microphone preamps. Designed to deliver professional sound quality for audio recording, mixing and mastering, Symphony I/O Mk II is the ultimate music production centerpiece for any modern studio. And now, with the Symphony I/O Mk II Dante option card and a simple ethernet cable, Symphony I/O Mk II can be easily connected and shared across post production, broadcast, live sound or recording studio networks, unleashing legendary sound quality on the world’s most popular audio-over-IP solution. The Symphony I/O Mk II Dante option card also includes Pro Tools connectivity for integration of Pro Tools | HD systems into a Dante network environment. No other Dante-enabled audio interface offers this level of quality, flexibility and modularity. Configurations:

• Symphony I/O MK II 8x8
• Symphony I/O MK II 16x16
• Symphony I/O MK II 2x6 SE
• Symphony I/O MK II 8x8+8MP

With the Symphony I/O Mk II Dante option card and a simple ethernet cable, Symphony I/O Mk II can be easily connected and shared across post production, broadcast, live sound or recording studio networks, unleashing legendary sound quality on the world’s most popular audio-over-IP solution.  With the Symphony I/O Mk II Dante option card and a simple ethernet cable, Symphony I/O Mk II can be easily connected and shared across post production, broadcast, live sound or recording studio networks, unleashing legendary sound quality on the world’s most popular audio-over-IP solution. The Symphony I/O Mk II Dante option card also includes Pro Tools connectivity for integration of Pro Tools | HD systems into a Dante network environment. No other Dante-enabled audio interface offers this level of quality, flexibility and modularity.

The NBB-0202 bi-directionally transmits 2x2 audio to and from Dante audio network. It accepts wide range of signal from MIC to LINE level while its output capability meets the industrial standard up to 24dBu. The NBB-0202 adopts Audinate Dante networking technology for audio transceiving, and is very network friendly with unlimited flexibility in topology of deployment. It supports up to Layer 3 of IEEE 802.3 network standard, enabling you to organize your audio network with the on-the shelf Ethernet switches or to immediately transport streaming audio by taking advantage of your existing installed network facility with no hassle. Even better, every NBB-0202 comes with two Ethernet ports which allow you to physically cascade several NBB-0202s in the same network link. Accompanying with Ethernet switches, this capability helps NBB-0202 gaining flexibility and expanding territory in device deployment in audio networking. Audio routing among each NBB-0202 and all the other Dante-enabled devices is configured via computer with dedicated Dante Controller software which is available free from Audinate website. With Dante Virtual Soundcard software, you are even able to have your DAW software direct record/play stereo streaming audio from/to NBB-0202. The audio input/output interfaces of NBB-0202 are fully met the requirement of professional audio industrial. Audio is encoded/decoded with the latest and uncompressed 24-bit PCM encoder/decoder with sample rate in 44.1KHz, 48KHz, or 96KHz. The NBB-0202 outputs are peculiarly buffered with amplifiers of high-rail-voltage which can drive the lines up to 24dBu. Besides the high-level of drive capability, the output of NBB-0202 can also be attenuated to meet the narrower reception range of inputs of some semi-professional devices. Both inputs of NBB-0202 accept signal of level from mic to line with individual gain and phantom power control. The NBB-0202 is also equipped with a pair of clip indicators for both the inputs to warn audio technician any signal overload on inputs. The NBB-0202 is assembled in a sturdy metal chassis with elegant style of front panel. A set of rackmount kit is included in the package so that you can mount the NBB-0202 in standard 19" rack. Features

• Dante-enabled networked Audio Receiver and Transmitter
• Streaming audio in robust standard Ethernet cable (a.k.a., Digital Snake)
• Easily organize and expand network topology with Ethernet switches
• Uncompressed 24-bit PCM coding with sample rate up to 96KHz
• Two RJ-45 ports make Daisy-chain cascading feasible
• Powered by either PoE or 48V adapter
• Gain or Attenuate control for each channel
• Phantom power engagement control per input channel
• Signal clip indicators for both inputs
• XLR Combo sockets for both XLR and TRS phone plugging
• Routing and other configuration are set with Dante Controller software
• Rackmount kit included

The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. Long Product Description (150 words or less): The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a large volume control. There are two GPI inputs for remote control of cut and dim. The DPM802 has many features that may be programmed via its web page including key colours, delay time, input gains and remote control of functions. For convenience of adjustment the delay time may also be set using just the front panel controls as well as via the web page. The unit includes a redundant network connection which may alternatively be used as a network switch output. The Dante Outputs Left and Right are mirrored on the rear of the DPM802 as balanced XLR analogue outputs for convenient connection to a power amplifier. The two analogue inputs may be assigned to any of the select switches. The unit may be powered by mains or PoE or both.

Bittree’s Patch32A Dante patchbay eliminates the complexity of analog and Dante audio patching in broadcast and professional AV infrastructures. Providing a ramp to instantly move 16 channels of analog audio onto and off of Dante networks, the new solution serves as a natural bridge between legacy audio equipment and IP-based systems using Audinate’s popular Dante media networking technology – including the Dante platform’s recently-added AES67 and SMPTE ST-2110 interoperability. The Patch32A minimizes cabling, conversion equipment and associated costs for broadcasters, recording studios, post-production facilities and commercial AV environments including houses of worship, performance venues, large corporate offices and higher education campuses. Bittree Patch32A Dante-Enabled Audio Patchbay Bridges Analog and IP Audio Infrastructures. Streamlining the integration of traditional analog and IP network-based audio patching, Bittree’s award-winning Patch 32A Dante audio patchbay provides an efficient and effortless ramp to instantly move 16 channels of analog audio onto and off of Dante networks. The Patch32A serves as a natural bridge between legacy audio equipment and IP-based systems that use Audinate’s popular Dante media networking technology, including the Dante platform’s AES67 and SMPTE ST-2110 interoperability. The Patch32A eliminates the complexity of analog and Dante audio patching by minimizing cabling, conversion equipment and associated costs for recording studios, performance venues, houses of worship, broadcasters and other professional audio environments. The Patch32A comes in a 1.5RU desktop form factor and features TT patching connections for analog I/O (16x16), redundant DC power inputs, external word clock I/O, network status indicators, and LED audio VU metering. 24-bit audio sampling at rates from 44.1 to 192 kHz is complemented by professional analog-to-digital conversions that maximize signal integrity and audio fidelity. The Patch32A can easily interface with Dante Virtual Soundcard, more than 1600 third-party Dante-enabled devices, and any live-level analog component.

The AVN-CU2-DANTE is a portable commentator unit. Using Dante® AoIP together with 4 wire connections the AVN-CU2-DANTE bridges the gap between old and new technology, allowing the ease of connectivity & functionality of AoIP, together with the legacy connections needed to operate with the existing infrastructure in some stadia and sports grounds. The AVN-CU2-DANTE is a portable commentator unit. Using Dante® AoIP together with 4 wire connections the AVN-CU2-DANTE bridges the gap between old and new technology, allowing the ease of connectivity & functionality of AoIP, together with the legacy connections needed to operate with the existing infrastructure in some stadia and sports grounds. This new Dante® commentary unit has been beautifully designed and is smaller than the existing Sonifex CM-CU1 single 4-wire unit whilst packing in more features. It’s been designed from the ground up to be configurable for different situations with config files that can be saved and recalled for quick setup. Additionally, buttons and rotary encoders can be locked out from use, if the unit is being operated by less-technical commentators. The unit supports up to 16 input and output AoIP channels and up to 16 simultaneous input and output AoIP streams. Stream setup to and from the unit is initially via Dante® Controller with more detailed configuration performed using the built-in web GUI. The power of this unit lies in the impressive mix engine which overlays the usual Dante® Controller settings. Once Dante® flows have been made, the mix engine allows inputs and outputs to be mixed freely to AoIP or physical inputs and outputs, controlled using the programmable buttons and rotary encoders on the unit.

FC-101Net is a compact 2-channel Dante™ decoder with 2 balanced mono audio outputs. It enables connecting non-Dante devices, such as amplifiers and powered speakers, to a Dante network and enables volume control. FC-101Net is a compact 2-channel Dante™ decoder with 2 balanced mono audio outputs. It enables connecting non-Dante devices, such as amplifiers and powered speakers, to a Dante network and enables volume control. FC-101Net is powered over Ethernet from any standard PoE providing network switch.

FC-102Net is a compact 2-channel Dante™ encoder with 2 balanced mono audio inputs that enables connecting non-Dante sources, such as microphones, laptops and players to a Dante network. FC-102Net is a compact 2-channel Dante™ encoder with 2 balanced mono audio inputs that enables connecting non-Dante sources, such as microphones, laptops and players to a Dante network. It supports line level and microphone level sources and can provide 48V phantom power per input. FC-102Net is powered over Ethernet from any standard PoE providing network switch.

PA-120Net is a high-performance, selectable Hi-Z (70V/100V) or Lo-Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs, additional line−level output and Dante interface.  PA-120Net is a high-performance, selectable Hi-Z (70V/100V) or Lo-Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs, additional line−level output and Dante interface. This versatile amplifier features built-in DSP, auto-standby and maximum durability. PA-120Net is suitable for a vast range of AV installations.

PA-240Net is a high-performance, selectable Hi-Z (70V/100V) or Lo-Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs and additional line-level output and Dante interface. PA-240Net is a high-performance, selectable Hi-Z (70V/100V) or Lo-Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs and additional line-level output and Dante interface. This versatile amplifier features built-in DSP, auto-standby and maximum durability. PA-240Net is suitable for a vast range of AV installations.

The DARK16AO provides 16 low noise balanced analogue audio outputs from a Dante network. It features redundant power supplies and a redundant network interface. The DARK16AO is a versatile break out box for receiving analogue audio from a network utilising the Dante® and AES67 audio over IP (AoIP) protocols. In total there are 16 channels of audio being received from the AoIP network and converted via low noise DACs (Digital to Analogue Converters) to balanced analogue outputs. For ease of cabling audio outputs are presented as balanced circuits on Neutrik XLRs. Being designed for resilient broadcast applications the DARK16AO features both redundant power supplies and redundant Dante® network links with link status GPOs (general purpose outputs (solid state relays)). Both primary and secondary network links are provided with both magnetic (copper RJ45) and fibre (SFP) interface connections. The Dante® system itself provides a completely transparent redundant link system which means that if the DARK16AO lost its primary link circuit the secondary link would automatically take over with no loss of audio.

The AoIP22 is designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Packaged in a small & rugged format and designed for outside broadcast, theatre and location applications. The AoIP22 is designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation. Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free. Whilst the low cost and long asset life will keep the accountant satisfied.

Housed in a very strong, lightweight aluminium chassis the AoIP22 AES3 units provide solid reliable problem free interfacing of balanced AES3 digital circuits to/ from your Dante network.  Housed in a very strong, lightweight aluminium chassis the AoIP22 AES3 units provide solid reliable problem free interfacing of balanced AES3 digital circuits to/ from your Dante network. Being PoE powered makes the devices very easy to connect to your infrastructure. Input sample rates are up to 192k and output sample rates can be up to 96k.

The Dark8ADI provides 8 line level analogue audio inputs and 4 x AES3 (8 audio channels) inputs to your Dante network. Like our other Dark units it has redundant network interfaces and redundant power supplies. The DARK8ADI (Analogue & Digital Input) is a very powerful Dante®/ AES67 network audio interface, in a robust 1RU 19" subrack It has a 8 off low noise analogue line inputs and 4 off transformer balanced AES3 digital audio inputs. These inputs are transmitted on a fully redundant Dante®/ AES67 network interface. In total 16 audio circuits are sent to the Dante®/ AES67 network. Eight of these circuits are always derived from the 4 x AES3 inputs, the other eight are automatically switched between the AES3 and analogue inputs. If the Dark8ADI detects valid AES3 signal on a channel then this will be routed to the network output, if no valid AES3 is detected then the analogue input will be routed to the network output instead of the AES3. The rugged design, redundant mains powering & redundant network facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.

Lucky Tone's DANTE WP 630 is a Dante 6-inch Wall speaker with built-in 2x30W amplifier, POE power supply and DSP, possible working with a passive speaker as PAIR. Lucky Tone's DANTE WP 630 6-inch wall speaker can realize its multifunction the POE power supply or 24VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Ethernet that transmits 24-bit audio (44.1K/48KHz) with its control signal can be routed through the Dante Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Lucky Tone's Dante DP 830R is an 8-inch 30W Coaxial Rimless Ceiling speaker with 24VDC or POE power supply and DSP. Lucky Tone's Dante DP 830R PoE Speaker can realize its multifunction the POE power supply or 24VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Lucky Tone's Dante DP 430 is a 30W Dante Wall Speaker with DPS, POE or External 24V DC power supply for outdoor and half outdoor applications. Lucky Tone's Dante DP 430 DP PoE Speaker can realize its multifunction the POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz)and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

At just 4U, DM0 is the most compact dLive MixRack and is targeted at distributed audio scenarios and digital splits. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It can be controlled with a dLive Surface, using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.

The DSP-1283 is a Crestron Avia™ 12x8 Digital Signal Processor w/ Dante™, USB Audio, AEC, & Audio Conferencing Interface. The DSP-1283 is a Crestron Avia™ 12x8 Digital Signal Processor w/ Dante™, USB Audio, AEC, & Audio Conferencing Interface. A powerful digital audio signal processor featuring best-in-class audio performance, Dante™ audio networking, extensive yet simple configurability, and native Crestron system integration. Features a built-in audio conferencing interface with high-performance acoustic echo cancellation.

The DM-NVX-352C is a DigitalMedia™ 4K60 4:4:4 HDR Network AV Encoder/Decoder Card with Dante® Audio. The DM-NVX-352C is a DigitalMedia™ 4K60 4:4:4 HDR Network AV Encoder/Decoder Card with Dante® Audio. A reliable, high-performance AV over IP encoder or decoder that transports 4K60 4:4:4 video over standard Gigabit Ethernet with no perceptible latency or loss of quality. Occupies a rack-mountable card frame. Supports HDR10 and HDCP 2.2, with built-in scaling and video wall processing, USB and KVM routing, native Dante® or AES67 transmit and receive capability, and optional fiber connectivity. Provides a secure, scalable 4K signal routing solution for enterprise and campus-wide content distribution applications.