Cart
← Back to Product Catalog

MONISMS – MNS-AMP260AC

Amplifiers

More details

Similar Products

audiocontrol-cm3-750
  • AudioControl

AudioControl – CM3-750

AudioControl’s 70 volt amplifier solutions deliver superior quality power and sound through a large number of speakers, ideal for outdoor audio systems as well as a large variety of commercial A/V applications.

DSP control and signal matrixing capabilities from AudioControl’s award-winning Director Series amplifiers enable integrators to precisely tailor the sound to any environment. Choose from balanced/unbalanced analog, microphone and digital inputs. Outputs can be configured in mono or stereo, giving integrators the configuration flexibility they need to accommodate any system architecture. For maximum efficiency, system setup and diagnostics can be managed remotely via an IP web-based browser or app for PC, Mac, iOS, and Android via IP.

    Amplifiers
  • Dante Ch: 16x16
See the product
nXp-1.52-front|nXp-1.52-front
  • Ashly Audio

Ashly – nXp1.52d

The nXp1.52d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 0x2
  • 48kHz-96kHz
See the product
  • Biamp

Voltera – D-2400-4

4-channel amplified loudspeaker controller, 2400 watts total power. Key Features
  • Integrated DSP provides essential capabilities for loudspeaker management
  • Up to 4800 W in single RU
  • Up to 8 channels in single RU
  • No central resource to limit system size
  • High peak voltage output capability (up to 237Vpk)
  • Power sharing provides up to 75% of total power through any single channel
  • Each model supports AVB, Dante, and AES67
  • Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
  • Onboard processing means system cost scales with power requirements
  • The ALAMOS loudspeaker profile library, with nearly 700 unique profiles covering over 200 Biamp models, saving valuable time during design and deployment
  • Group-controlled raised cosine EQ making it attractive for large systems
  • Accurate raised cosine EQ for the entire frequency band
  • Comprehensive limiter scheme avoids protective mutes and shutdowns
  • Processor can be sustained through PoE during power failures, avoiding reboots
  • Support for failover-to-analog operation
  • Wide dynamic range
  • 5-year warranty
  • Compliant with the US Trade Agreement Act (TAA)
  • Biamp Workplace Ready
    Amplifiers
  • AES67 Enabled
See the product