The headset module (HSM) enables an attachment of a stereo headset into a Dante network. Either dynamic or electret microphones can be used. The headphone power level can be individually adjusted for left and right channel. With a power boost switch an additional gain of 9dB can be set for noisy environments. The module is PoE powered (13W).
With the GPIO module (GPM) GPIO signals can be attached to a Dante network. In potential free configuration 4 in and out can be used, in refrerence to a common potential up to 8 GPI / GPO's are available. The module is PoE powered (13W).
The PRU basically serves as a audio router with up to 4 interfaces with 64 channels each in a 19"/1RU case. Every single input can be routed to one or many outputs using the EmBER+ interface. For each of the 4 interfaces the protocol can be chosen to be either Dante (Audinate's Brooklyn II) or SMPTE-2110 (Ross Video's Liberty). The built-in sample rate converters allow therefore up to 4 independently synchonized clock domains to be connected to the PRU. Using two of each module type, a 128-channel bridge between Dante and SMPTE-2110 can be formed. Optionally PRU can be extended by a central intercom matrix. The 256x256 matrix is fully equipped with summing and level adjusting features.
Flex Focus loudspeakers employ shaded line array technology with ribbon HF drivers to extend sound projection in longer meeting rooms. Their Frequency response (120-20,000 Hz ±3 dB) has been optimized for speech intelligibility.
Flex Focus Vertical Arrays are available in two configurations. A standard version with loudspeakers oriented for monitors which are mounted at a normal viewing height and an LAC (Lowered Acoustic Center) version for monitors which are mounted above normal viewing height.
Flex Focus loudspeakers are also available in three powered configurations, each with 100- watt class D amplifiers:
Dante-enabled models include:
Flex Synergy Compact ultra slim conferencing platform which is custom sized to match the exact width of video displays from 46” to 70”. It is available in a standard version, with onboard powered DSP and a compact camera pocket (H 2.75″ x W 3.75″ x D 3.25″), and an enhanced version which adds Dante connectivity and Ethernet control. Its frequency response (120-20,000Hz ±3 dB) has been optimized for speech intelligibility.
Adding an Innovox Flex- Companion Series powered sub-woofer will extend low-frequency performance below 50Hz to deliver high impact full range music program.
Key Features
Applications
Flex Precision display mount loudspeakers employ ribbon HF and extended range LF drivers in an ultra slim enclosure. Their frequency response (120-20,000 Hz ±3 dB) has been optimized for speech intelligibility.
Flex Precision loudspeakers are also available in three powered configurations, each with 100-watt class D amplifiers:
Dante-enabled models:
The SOFIA 568 provides analog, AES3-digital and AoIP-streaming audio outputs. It collects histograms of signal parameters and dis-plays HD Radio™ album artwork, station logos and similar visuals via the Web interface.
Multiple stations can be sequentially monitored using the programmable StationRotation™ feature. The SOFIA 568 includes a built-in BandScanner™, a real-time clock and full SNMP functionality.
The elite SiteStreamer+™ (‘Plus’) series offers advanced features for the most critical monitoring situations.
SiteStreamers™ also deliver important RF and audio signal measurements and dispatch email or text-message alarms for out-of-limits conditions and other reception errors.
The Just Add Power 3G+ Dante® Sound System Transmitter adds compatibility with Dante® and AES67 audio networks to the UltraHD over IP system.
Input up to 8 channels into the Dante® network. Extract up to 8 channels from the Dante® network, embed onto the HD over IP signal, and distribute across the Just Add Power network. Mix-and-match! The 3G+ Dante® Sound System Transmitter is fully compatible with all 2GΩ/3G and 3G devices. Not just for Dante®. AES67 compatibility for interoperability with other leading audio-over-IP technologies.
The KH5 is the biggest speaker of the K-array Concert Series and represents a revolutionary compact line array element for large scale events.
The KH5 has 2 x 15" neodymium woofers with a 3" voice coil and 4 x 1 . 4" compression drivers.
The K-array KS5 is a self-powered subwoofer system. It is best suited for high-powered, extended bass response applications in arenas, theatres, stadiums, concert halls, houses of worship and outdoor events.
The 21" loudspeakers feature Neodymium magnets with 6" voice coils driven by powerful Class D amplifiers
The rear panel provides inputs for a balanced line signal, a balanced microphone signal with phantom power, and digital signals in AES/EBU protocol, also on an XLR for ease of cabling.
KH2 speakers are part of K-array Concert Series, which includes a wide range of professional audio products serving as sound system for small, medium and big scale events. The KH2 is a revolutionary compact line array element ideal for club or a theater.
The smallest mid-hi line array element offered in the Concert series is comprised of 2 x 8" neodymium magnet woofers each with 2 . 5" voice coil and 1 . 4" compression drivers with a 2 . 5" voice coil each.
However small in size, the KH2 delivers a really large sound, ensuring exceptionally high performance with a peak SPL of 136 dB.
The KH2SYS6 is an incredibly compact and lightweight system perfect for intimate indoor settings with the possibility to expand for larger venues.
Lightweight, compact solutions to meet small venue needs
Exceptionally high performance with a peak SPL of 136 dB
The ADX-2400D is the AES version of the ADX system head-end unit. It provides the network interface for 24 channels of AES digital audio in each direction (inputs and outputs). This unit may be used as the 'truck end' of an announce booth system using ADX-120s and ADX-140s, may be used with other ADX-2400s to create a networked transmission system, or may be used stand-alone as a high-quality, compact 24-channel delay unit.
In the Announce Booth mode each ADX-2400D supports up to four remote devices, either the ADX-120s or ADX-140s in any combination. Multiple ADX-2400s (analog and/or AES) may be operated on the same network to expand system capabilities to meet any required system configuration.
The Duet digital wireless monitor system represents a significant step forward for touring performers and other professionals requiring high definition audio in their ears. With 24 bit digital audio, low latency, Dante inputs and a compact, lightweight, diversity bodypack unit, the Duet system should please even the most demanding users, both on and behind the stage.
The new Duet digital wireless monitor system consists of the M2T dual-stereo half-rack transmitter and M2R diversity belt pack receiver. The Duet covers the UHF frequencies of 470-608 MHz (138 MHz) in a single range, uses digital modulation for transmission, and can accept analog or Dante™ digital inputs. The new system can be considered a "wireless IEM" or a deluxe IFB product, designed and developed with professional touring, installation, theater, filmmaking and broadcast customers in mind.
The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full size XLR/TRS combo types for balanced line level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise. A Dante Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can cascade the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.
The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other noisy environments. A high-resolution, color LCD allows for a wide range of menu options, including precise limiter settings, using detailed graphics. The M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells.
The D Squared digital wireless microphone platform utilizes the Lectrosonics 4th-generation digital architecture for excellent flexibility, ultra-fast setup, studio quality audio, and ultra-low latency. The system includes the DSQD 4-channel digital receiver, DBu digital belt pack transmitter, and DHu digital handheld transmitter. System features include 24 bit, 48 kHz digital audio, 2-way IR sync, three different encryption key policies, and a tuning range from 470-608 MHz (470-614 MHz for export versions).
The Linea Research 44M20-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44M20-Dante delivers 5000W per channel into 2 Ohms , 3000W per channel into 4 Ohms, 1500W per channel into 8 Ohms.
Linea research 44M Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
For portable applications 44M Series amplifiers can be controlled from the front panel or via PC software.
The wired, Dante®-enabled gooseneck microphone can conveniently be integrated into a Dante® Audio over IP network and provides an excellent voice transmission for fixed installations in shops, hotels, in pubs and restaurants, in schools or indoor sports facilities. The installation is quite easy: the desktop microphone is connected to the network via the RJ45 jack and supplied with power via Ethernet cable (PoE). The free software 'Dante® Controller' allows you to determine which Dante®-enabled receiver is recipient of the routed audio signals. It is possible to transmit uncompressed and synchronised digital audio signals with virtually no latency. The touch-sensitive microphone button allows you to select the following operating modes: PTM, PTT, on/off and off/on. It is also possible to activate the 3-step attenuation which is separately selectable in case of high-volume signal sources.
PA desktop microphone (push-to-talk) with integrated Dante®module
DRM-884DTM is a Dante® module for inserting audio matrix router DRM-884 into a Dante® network.
Monacor's DRM-884 is s general solution for versatile multi-room PA concepts with fixed installations in hotels, restaurants and bars, conference rooms, schools, sports and fitness centres.
The matrix system DRM-884 is a professional tool with extensive features which easily meets any requirement: users can combine signal sources, play one source in several zones or several sources in one zone, adjust the volume in each zone and much more. The audio matrix router DRM-884 is the heart of the system which is able to distribute a maximum of 8 analogue and 4 digital audio sources to just as many output zones, any assignment possible. You can either connect active speakers or a power amplifier with passive speakers to the output zones via Phoenix terminals.
The multifunctional matrix system is controlled via wall panels: modules DRM-884VAP and DRM-884VP allow you to remotely access, e.g. level and program selection in the different zones. The wall panel DRM-884IOP allows for other connection options are available, e.g. at the location of the PA application. The zone paging microphone DRM-884RC with zone selection can be connected for announcements.
Expand your options with the matrix system: if you need a larger number of inputs and outputs, the system can be extended from a maximum of 16 x DRM-884 and optional Dante® module to 192 inputs x 192 outputs by means of cascading.
With the Dante® extension module DRM-884DTM, the DRM-884 can quickly and easily be inserted into a Dante® audio network. For this purpose, there are an additional 8 digital inputs or 8 digital outputs available which can be assigned to either an analogue output or a Dante® channel.
The Music-Engine is a legalized music device for commercial users. The delivery of a ME-player includes the patented hardware and a comprehensive music database. In addition to that the system receives regular updates considering the relevant sections of law. The high level of music quality as well as precast music lists and daily programs enable a simple and efficient access to the system. The high level of technology allows the user to play music in multiple rooms which is an ideal solution for shopping malls, hotels etc. A further professional feature is the adding of commercial jingles. All music engines can be controlled by an internet browser, whereas the product „Music Engine Dante“ can be controlled by the remote application by the title of “monacor DSP controller” which is available on the iOS-Store.
Core features: simple usage, quick& intelligent music search, playlists in perfect quality, constant volume regulation, sonication of multiple rooms, separate control of particular rooms/zones, digital transmission of audio signals, software for remote control of the audio signal, software updates via online updates or DVDs.
VMX88 delivers all the benefits and experience of our live sound filters and dynamics algorithms in an installation product. The 8 analogue inputs have individual compressors, as well as a 24dB/Oct high pass filter, 8 bands of parametric EQ and up to 1.3 seconds of delay. The full matrix mixer allows mixing of not just the analogue inputs but also 8 channels of Dante networked inputs to any output channel. Audio channels can be routed to the 8 channels of Dante network outputs from multiple stages in the audio chain to give flexibility in system design. All of the 8 analogue outputs have 16 bands of parametric EQ, 48dB/Oct high and low pass filters, up to 1.3 seconds of delay as well as our high performance, two-stage PXL limiters for high performance loudspeaker protection. All analogue audio connections are on Phoenix-type 3-pin 5.08mm pitch connectors. The 4 GPI connections allow configurable actions such as fire alarm mutes and preset recalls. Up to 30 presets can be stored with recall options allowing selective recall combinations of input, matrix and output sections.
Pinanson's Press Splitter SA SMC DANTE is a Press Splitter with Dante input plus analogue audio.
Features
Models
Mezzo offers the same sound clarity, reliability, and overall build quality of any Powersoft install dedicated amplifier platform in a ½ rack unit form factor. It comes in 2 power supply sizes, 2 or 4 channels, and state of the art DSP.
All models offer multiple analog input options, and the 2 channel versions feature line level outputs.
AD versions of Mezzo add audio networking capabilities with DanteTM/AES67 and an internal Gigabit Ethernet switch and a second port so that multiple products can share the same network cable.
The smaller versions of Mezzo are sealed designs, therefore approved for hidden placement, such as mounted above the ceiling or tucked in a wall box.
The included mounting accessories allow multiple options: 1 or 2 Mezzo in a 19” Rack, 1 Mezzo in an 11” rack, wall mount brackets allow it to be mounted on any flat surface, also under a table or in the ceiling. Rubber feet allow Mezzo to be placed on a shelf.
Dante-enabled models:
A terrific complement for any full-range loudspeaker and the perfect companion for the PreSonus® CDL12 Constant Directivity loudspeaker, the CDL18s delivers a tight, coherent low-end, driven by an integrated 1000-watt Class D power amp, and features a unique ported design that maximizes efficiency in a compact form-factor. The Dante®-enabled CDL18s provides the articulate sub-bass frequency reproduction demanded by audio professionals thanks to its custom 18-inch low-frequency transducer with 4-inch voice coil, providing 7 mm of driver travel before over-excursion to move more air for a low-end punch you can feel. When flown together in a vertical array, or combined for ground-stacked applications, the CDL18s and CDL12 form a complete, coherent loudspeaker system with an even response across the frequency spectrum.
The AoDoM 2 channel provides one RJ45 Dante input and two Neutrik NC3MXX-BAG series black XLR analog outputs. Using our rugged aluminum extrusion channels and hand soldered, 3 ft. analog audio tails, ProCo AoDoM modules provide simple connection of analog equipment to a Dante network and provide studio-quality, low-latency audio via the XLR connectors. Comaptible with any Dante ecosystem and provides line level analog audio signal to output devices.
The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz. Built-in sample rate conversion (SRC) converts the Dante sample rate to the fixed 48kHz sample rate required by the Terminal 1010x.
The Dante interface is managed using Audinate’s Dante Controller software. Dante controller is a free software application that enables the user to route and configure devices on a Dante network.
The Terminal 1010x takes the DSP Experience to the next level with an intuitive front-panel that enables users to control 10 analog balanced inputs for Mic/Line/+48V and 10 balanced outputs. There are also 6 flexible RAD Plus PoE ports to connect breakout boxes and wall plate remote controls and 4 Universal GPIO logic ports for external devices such as alarm systems, sensors, lights, projectors, etc. There is also a slot for an optional DANTE™ 32x32 card for network connectivity.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
