Cart
← Back to Product Catalog

EAJAX – PDF15D

Speakers

More details

Similar Products

CA306D
  • DMIX

DMIX – CA-306DA

Technical parameters：

Speaker model: CA-306DA

Speaker type: Active Speaker

Unit composition: 6×3" Full frequency unit

Frequency response: 130Hz-19kHz （-10dB)

Sensitivity: 95dB

Rated impedance: 12Ω

Sound pressure level: 122dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x20°-30°，Electronic control

    Speakers
See the product
hs-25_400px
  • VUE Audiotechnik

VUE Audiotechnik – hs-25

Think of the hs-25 as the hs-28’s “bully” little brother, it also deploys our patent-pending Active Compliance Management technology. ACM combines both band-pass and vented alignments into a single enclosure. The hs-25 places two precision-designed, 15-inch transducers into this configuration, with both woofers sharing a common vented chamber. Think of the hs-25 as the hs-28’s “bully” little brother, it also deploys our patent-pending Active Compliance Management technology. ACM combines both band-pass and vented alignments into a single enclosure. The hs-25 places two precision-designed, 15-inch transducers into this configuration, with both woofers sharing a common vented chamber. One woofer’s frontal radiation is direct, while the second woofer’s frontal radiation drives the band-pass chamber. Onboard electronics include amplifier module that supplies 830W pure sine wave power (2000W “peak” power) to each woofer and DSP to ensures the precise phase arrivals of the front facing woofer and both vents. The combination of ACM, sophisticated DSP and active electronics allow the hs-25 to deliver much higher output throughout its operating bandwidth from a footprint that’s smaller than most dual 15-inch vented designs.
    Speakers
See the product
CgAGfFw-lmGAKw57AAPuxv7v8qU652
  • Soundking

Soundking – P14CA

Features

1). PoE-based active speaker P14CA(ceiling) is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

    Speakers
See the product