Cart
← Back to Product Catalog

EAJAX – MA602

Speakers

More details

Similar Products

WM-6D
  • Kramer

WM-6D

  • 6.5”, 2–way wall mounted PoE powered Dante speaker
  • Superb sound with esthetic design
  • Power handling: 10W continuous / 30W peek
  • Nominal sensitivity (1W @ 1m free field): 90dB SPL
  • Maximum SPL: Continuous 100dB SPL / Peak 105dB SPL
  • Regulatory compliance: o    UL 1480A o    IEC62368(CB) / CE LVD, UL62368 o    FCC+IC, BIS, RCM o    RoHS, REACH, WEEE
  • TAA compliant option
  • Available in both black & white colors
  • Eco–friendly packaging
    Speakers
  • Dante Ch: 2x0
See the product
K-array_-_KMT21_Mark_I_425pxl
  • K-array

K-array – KMT21 Mark I

KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
    Speakers
See the product
lucky-tone-dante-dp-430-poe-dsp
  • Lucky Tone

Lucky Tone – Dante DP 430

Lucky Tone's Dante DP 430 is a 30W Dante Wall Speaker with DPS, POE or External 24V DC power supply for outdoor and half outdoor applications. Lucky Tone's Dante DP 430 DP PoE Speaker can realize its multifunction the POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz)and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.
    Speakers
See the product