Salzbrenner – NIO xcel 1102


More details

Similar Products

relacart-dt400_600px|relacart-dt400_600px
  • Digidynam

Digidynam – DT-400

DT - 400 is with powerful function and no need to learn of the digital networked audio interface, provide 4 channel mic/line inputs with phantom power and 4 channel outputs. DT - 400 is with powerful function and no need to learn of the digital networked audio interface, provide 4 channel mic/line inputs with phantom power and 4 channel outputs. With many excellent properties, without design, no need to learn. For a specific place and system optimization to provide a complete set of audio processing solutions. Apply to Dante ™ audio occasions, traditional audio system upgrade.
    I/O Interfaces
avn-ao16r-iso-square
  • Sonifex

Sonifex – AVN-AO16R 16 Output Dual Dante®Interface, PoE

The AVN-AO16R audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.

This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

    I/O Interfaces
  • Dante Ch: 16x0
  • 16-bit, 24-bit, 32-bit
calrec-hydra2_800px|calrec-hydra2_800px
  • Calrec

Calrec – Hydra2

Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location.  Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location. Hydra2 does not compromise audio quality, performs with negligible latency and is founded on comprehensive, built-in fault detection and redundancy. Many of the world’s most successful broadcasters rely on Hydra2 infrastructure for live on-air application in both fixed and mobile installations every day. At the heart of Hydra2 is the 8192² Calrec router (4096² on Summa and Artemis Light). Networks become more advanced when multiple routers are connected together to add additional mixing consoles, or to increase the amount of I/O connections available. Routers, mixing consoles and I/O can all be easily connected to the network as and when needed. Hydra2 provides 1-to-n routing; input sources may be routed to any number of destinations in mixed formats, removing the need for external splits, distribution amplifiers and format convertors. Sources can be routed to multiple consoles, to multiple DSP inputs on each console and directly to output destinations all at the same time. I/O units connect to a Hydra2 router via a single Cat5e or fibre link and can carry 512 channels of 24 bit 48KHz audio in each direction simultaneously, along with control and error detection data. Bandwidth between routers can be increased in multiples of 512 channels by adding additional Hydra2 links between them. As with all Calrec products, audio quality and product reliability are our top concerns. All analogue pre-amps and line level paths are designed around our well proven and highly respected circuitry, providing very high headroom with a very low noise floor. Our lossless proprietary network transportation protocol does not compromise the high audio quality and maintains minimal latency.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit