Dante-enabled Product Catalog

The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking.  The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking. Each HDMI input handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, 3D, and high-bitrate 7.1 audio. Support for Dante audio networking allows for interfacing with other Dante enabled equipment over the local area network to send and receive streaming stereo audio on any or all input channels. The analog audio inputs are enabled using the optional Analog Audio Breakout Box, which provides support for balanced or unbalanced stereo line-level signals. Analog Audio Embedding Each HDMI input on the DMB-4K-I-HD-DNT is accompanied by a balanced analog audio input, allowing stereo analog audio signals to be embedded with the digital video signal. The analog audio inputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602). Dante™ Audio Networking Dante networking enables streamlined integration with Crestron Avia™ DSP products and other Dante enabled audio sources, processors, mixers, and switchers. Dante allows stereo audio input signals to be received over an Ethernet network and embedded with the video input signal from any of the blade’s HDMI inputs. Send/return loop capability is also supported, allowing audio from any HDMI or analog input to be externally processed, mixed, or switched via Dante, and then re-embedded with the video signal within the DM switcher. The Dante network interface is provided via the DM switcher’s LAN port, supporting up to 120 simultaneous stereo input and output signals. CEC Embedded Device Control DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-I-HD-DNT provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking.  The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking. The HDMI outputs are each capable of handling Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, and high-bitrate 7.1 audio. Built-in 4K scaling enables the devices connected to each HDMI output to handle any video resolution from NTSC 480i to 4K DCI. DVI signals are also supported using HDMI-to-DVI adapters or interface cables. Support for Dante audio networking allows for routing of stereo audio output signals to other Dante enabled equipment over the local area network. The analog audio outputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602), which provides support for balanced or unbalanced stereo line-level signals. 4K/60 Scalers An independent, high-performance 4K scaler is provided at each output to ensure that input sources of any resolution or frame rate can be routed and displayed reliably on virtually any display device without compromising the original input signal. As part of a DM® switcher with many outputs, this allows any video or computer source to be viewed simultaneously on multiple disparate displays, scaling the signal up or down to match the native resolution of each display. No matter what source is selected, or where it’s routed, the DMB-4K-O-HD-DNT helps to ensure an optimal image on every screen. It can take any input resolution from standard definition NTSC 480i to ultra high-definition 4K DCI, and scale it beautifully to any output resolution up to 4K DCI (4096 x 2160 @ 60 Hz). Interlaced sources are converted to progressive scan using motion-adaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. 3D signals are converted to 2D. Fully automatic operation eliminates any complicated setup by utilizing the displays’ EDID to configure each scaler. Video Wall Processing The DMB-4K-O-HD-DNT has another trick up its sleeve, providing zoom capability and bezel compensation on each output to display just a portion of the source image. Using this feature, up to eight output cards may be combined to provide processing for a video wall composed of up to 64 individual displays. Video wall configurations up to eight wide by up to eight high are supported. Analog Audio De-Embedding Each HDMI output on the DMB-4K-O-HD-DNT is accompanied by a balanced analog audio output, allowing stereo audio signals to be extracted from the digital output and fed to a sound system. The analog audio outputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602). Dante™ Audio Networking Dante networking enables streamlined integration with Crestron Avia™ DSP products and other Dante enabled audio processors, amplifiers, mixers, and switchers. Dante allows stereo audio signals from any or all of the blade’s outputs to be routed to such equipment over an Ethernet network. Send/return loop capability is also supported, allowing audio from any input source to be externally processed, mixed, or switched via Dante, and then re-embedded with the video signal at any of the HDMI outputs. The Dante network interface is provided via the DM switcher’s LAN port, supporting up to 120 simultaneous stereo input and output signals. CEC Embedded Device Control DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-O-HD-DNT provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced. The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced. The unit is completely configurable: each input can be assigned to any output with various crossover filters (Butterworth, Linkwitz-Riley, Bessel), 10 parametric equalisers, compressor/limiter, delay up to 2 seconds (680 metres), polarity, up to 80 presets memory, password protection and PC software control (Windows and Mac OS).

AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. It is high efficiency output, outstanding sound quality, perfect protection function and good electromagnetic compatibility. Able to remotely monitor running status through Dante network including alarm and protection of temperature, voltage, current and volume at abnormal status, and DSP processing as well as receive the network audio signal through the built-in Dante module via a CAT 6 cable. It adopts AC100-240V 50/60Hz universal power supply. 

AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. It is high efficiency output, outstanding sound quality, perfect protection function and good electromagnetic compatibility. Able to remotely monitor running status through Dante network including alarm and protection of temperature, voltage, current and volume at abnormal status, and DSP processing as well as receive the network audio signal through the built-in Dante module via a CAT 6 cable. It adopts AC100-240V 50/60Hz universal power supply. 

AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. It is high efficiency output, outstanding sound quality, perfect protection function and good electromagnetic compatibility. Able to remotely monitor running status through Dante network including alarm and protection of temperature, voltage, current and volume at abnormal status, and DSP processing as well as receive the network audio signal through the built-in Dante module via a CAT 6 cable. It adopts AC100-240V 50/60Hz universal power supply. 

Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo utilises Bluefin2, the next generation of Bluefin HDSP, which provides unrivalled resources of up to 1020 channel processing paths, 128 program busses, 96 IFB/Track outputs and 48 auxes. With single and dual fader options, Apollo can squeeze in more faders into a single footprint that any other console, and its integrated router provides total network flexibility. Apollo’s I/O functions are performed by the Hydra2 network, which uses high capacity 8192² cross-point routers and a variety of I/O units.

Dante interface card for Calrec's Hydra2. Dante interface card for Calrec's Hydra2.

Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location.  Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location. Hydra2 does not compromise audio quality, performs with negligible latency and is founded on comprehensive, built-in fault detection and redundancy. Many of the world’s most successful broadcasters rely on Hydra2 infrastructure for live on-air application in both fixed and mobile installations every day. At the heart of Hydra2 is the 8192² Calrec router (4096² on Summa and Artemis Light). Networks become more advanced when multiple routers are connected together to add additional mixing consoles, or to increase the amount of I/O connections available. Routers, mixing consoles and I/O can all be easily connected to the network as and when needed. Hydra2 provides 1-to-n routing; input sources may be routed to any number of destinations in mixed formats, removing the need for external splits, distribution amplifiers and format convertors. Sources can be routed to multiple consoles, to multiple DSP inputs on each console and directly to output destinations all at the same time. I/O units connect to a Hydra2 router via a single Cat5e or fibre link and can carry 512 channels of 24 bit 48KHz audio in each direction simultaneously, along with control and error detection data. Bandwidth between routers can be increased in multiples of 512 channels by adding additional Hydra2 links between them. As with all Calrec products, audio quality and product reliability are our top concerns. All analogue pre-amps and line level paths are designed around our well proven and highly respected circuitry, providing very high headroom with a very low noise floor. Our lossless proprietary network transportation protocol does not compromise the high audio quality and maintains minimal latency.

The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity.  The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity. Bluefin2 gives Artemis Shine 680 channel processing paths, with up to 128 program busses, 64 IFB/Track outputs and 32 auxiliaries. Artemis’ integrated router means all I/O functions can be performed by Hydra2, using the same high capacity cross-point router technology and a variety of I/O units.               

The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity.  The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity. Bluefin2 gives Artemis Beam 340 channel processing paths, with up to 128 program busses, 64 IFB/Track outputs and 32 auxiliaries. Artemis’ integrated router means all I/O functions can be performed by Hydra2, using the same high capacity cross-point router technology and a variety of I/O units.               

The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity.  The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity. Bluefin2 gives Artemis Light  240 channel processing paths, with up to 128 program busses, 64 IFB/Track outputs and 32 auxiliaries. Artemis Light packs all this into a 4U enclosure. Artemis’ integrated router means all I/O functions can be performed by Hydra2, using the same high capacity cross-point router technology and a variety of I/O units.               

Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Control is via a 17-inch multitouch screen inspired by familiar tablet technology, with a straightforward interface that uses established finger gestures to navigate the system. Summa’s considered control simplifies even complex workflow tasks, such as creating mix-minus feeds. Bluefin2 technology gives the Summa 128 a pool of 128 channel processing paths, eight groups, four mains, 16 auxes, and 32 tracks. Its Hydra2 router core provides Summa with the same integral router technology as the Apollo and Artemis consoles.

The WP-DN360 is a digital amplifier with high efficiency and high reliability design.  The WP-DN360 is a digital amplifier with high efficiency and high reliability design. 

• WP-DN 360 is 4 ch with maximum output 560 W × 4 (4 Ω load)
• Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
• Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
• Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
• Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
• Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
• Corresponds to EIA rack mount. 
• BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 

• WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
• Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
• Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
• Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
• Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
• Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
• Corresponds to EIA rack mount. 
• BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.

The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation. The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation.

• In addition to analog input 32 ch, AIR microphone (L / R), announcement microphone, talkback are combined and equipped with a total of 36 ch. 
• Equipped with 16 channels of analog output, it can output not only matrix output but also mixing bus. 
• 100 mm motor drive fader is adopted, with a total of 33 loaded. The fader part consists of 2 layers. 
• 96 pattern memory, 8 mute groups plus 16 library memory for equalizer and dynamics respectively. 
• Remote control software for PC that facilitates monitoring of multiple channels and data management for each project is standard attached. 
• It can also support remote control by iPad, simple adjustment on / in the stage is possible. 
• Three expansion slots are installed, and one 8-ch analog input card is included as standard in one. 
• option card (WR-PC001) Dante in mounting TM voice input / output via the audio network (16 input 16 output per 1SLOT) is possible. 

The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX 400.   The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX400.

• Analog input 12 ch (mono microphone / line input x 8, stereo line input x 2), analog output 8 ch. 
• Standard installed PC remote control software that facilitates multi-channel condition monitoring and memory management for each project. 
• It can also support remote control by iPad, simple adjustment on / in the stage is possible. Also equipped with one expansion slot. 
• option card (WR-PC001) of Dante by mounting TM possible voice input / output via the audio network (16 input 16 output).

Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700. Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700.

MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software.  MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. The 4 output stages use the well-proven Pascal Class D SA-2 module, obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. MDA4-1000M is also a capable and sophisticated loudspeaker processor, with powerful M716 DSP running 96 kHz / 24 bit and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system. A 12dB headroom process is available.  

24 tracks digital on-site audio recorder with embedded mixer plate, intuitive interface and a optional Dante board with 32 channels input and output.

Analog and Digital Inputs

• 12 analog inputs on XLRs
• 8 low noise mic preamps with very high quality transformer, 48V Phantom, limiters and filters
• 4 analog line inputs
• Multiple AES digital inputs includes 2 AES42 pairs (mode 2), 8 AES/EBU and a Dante Audinate network access

Mixer and Outputs

• Ten tracks mixer plate with magnetic linear assignable faders
• All inputs can be routed to any of the 24 tracks
• All tracks and inputs can be routed to 8 analog auxiliary outputs and /or digital outputs
• Mixdown can be assigned to any of the tracks

Recording Media

• Records and playback to and from internal 256 Gg SSD drive (expandable SSD size)
• Simultaneous recording to internal SSD drive, two SD cards and USB external drive

Metering and Controls

• Ultra bright large swivelling display panel, visibility optimised for shoulder work or cart
• Two large rotary control selectors for easy record and operations in any situations
• Linear control faders addressable to any inputs and output
• New improved interface menu accessible through buttons, jog wheel - All inputs and outputs monitoring and routing available through comprehensive and intuitive menus
• USB keyboard input for easy metadata editing and routing control
• Wifi and Bluetooth communication 

The Dante-MY16-AUD2 is a fully compatible Yamaha Mini-YGDAI card that instantly Dante-enables your Yamaha mixer, processor, interface or power amp. The Dante-MY16-AUD2 is a fully compatible Yamaha Mini-YGDAI card that instantly Dante-enables your Yamaha mixer, processor, interface or power amp. Add up to 32 (16x16) channels at 44.1kHz or 48kHz, or 16 (8x8) channels at 88.2kHz or 96kHz, with each Dante-MY16-AUD2 card you install, with full Dante network audio redundancy over Gigabit Ethernet. Compatible with a range of digital mixing consoles, processors and power amps equipped with MY16-interface compatible card slots, including:

• Digital Mixers: CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
• Interfaces: RSio64-D
• Processors: MRX7-D, MTX5-D, DME24N, DME64N
• Power Amps: Tx4n, Tx5n, Tx6n

Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Control is via a 17-inch multitouch screen inspired by familiar tablet technology, with a straightforward interface that uses established finger gestures to navigate the system. Summa’s considered control simplifies even complex workflow tasks, such as creating mix-minus feeds. Bluefin2 technology gives the Summa 180 a pool of 180 channel processing paths, eight groups, four mains, 16 auxes, and 32 tracks. Its Hydra2 router core provides Summa with the same integral router technology as the Apollo and Artemis consoles.

The AMK DS82-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This is a 2 Channel System. The AMK DS82-B loudspeaker assembly is powered by a POE+ network amplifier with Dante™ input. No external power supply is required. The speaker includes a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. This is a 2 channel system. One PoE amplified speaker can power a total of (2) speakers, one active and one passive speaker. The passive speaker installed at different zone for different channel of broadcasting. The CX802 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications. This assembly can be used in wide range of projects for paging and background music applications. The DS82-B is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.

Dual DSP audio processing, dante 8-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; dante signal output 8-channel digital network; speaker manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter).  Dual DSP audio processing, dante 8-channel digital network signal input: trigger signal, channel expansion, signal compressor, 5-8 bands of parametric EQ, automatic digital mixing consoles; dante signal output 8-channel digital network; speaker manager ( 5-band parametric equalizer, delay, crossover, high and low pass filter, limiter). With matrix mixing function for each channel. Built-in automatic mixer function comes DANTE network audio transmission function; and automatic software upgrade (after the upgrade support) Enterne use data transmission and control port; built-in automatic camera tracking; RS-232 bi-directional serial control interface for controlling other external equipment such as: video matrix and other RS-232 devices, or receive a third-party RS-232 control; RS-485 camera control ports; GPIO programmable control interface (8 groups, can be custom programmed control); support plate interface operation control. 1-8 support group scene preset functions; an intuitive, graphical interface software control, can work XP / Windows7,8,10 systems environment. Key Features:

• USB playback and recording features background music
• Support for phone, tablet, and control distributed cloud control
• Input per channel: preamp, signal generator, expander, compressor, 5-band parametric equalizer
• output per channel: 31-band graphic equalizer, delay, crossover, limiter
• Preparation for each channel matrix mixer function, built-in automatic mixer function
• Dual DSP audio processing, built-in automatic mixer, free matching feedback cancellation, echo cancellation, noise cancellation block
• Built-in auto tracking camera function, support multiple standby for each channel matrix mixing function. Built-in automatic mixer function for each channel matrix prepared by mixing capabilities. Built-in automatic mixer function scene preset function;
• using EIA standard 1U aluminum chassis, automatic power-off memory protection;

AVDT-BOB-AS8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on DB25 connector plus optical fiber connection for Dante Network. AVDT-BOB-AS8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on DB25 connector plus optical fiber connection for Dante Network. Embedded DSP allows for full mixing of the four Dante inputs/outputs and the four analog inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Three Gigabit switched ports allows for daisy-chained/star connection without any bandwidth bottleneck. Neutrik port provides Power-Over-Ethernet for direct power supply (alternate 12Vdc jack input can be used as redundant PSU). SFP ports accept multi-mode or single-mode fibers, allowing to link devices on distances up to 20km. The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

AVDT-BOB-AE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on terminal block connectors. AVDT-BOB-AE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides four state-of-the-art analog microphone preamplifiers inputs and four analog line outputs on terminal block connectors. Embedded DSP allows for full mixing of the four Dante inputs/outputs and the four analog inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Two Gigabit switched ports allows for daisy-chained connection without any bandwidth bottleneck. One port provides Power-Over-Ethernet for direct power supply (alternate 12Vdc jack input can thus be used as redundant PSU). The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

AVDT-BOB-AE4IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on terminal block connectors. AVDT-BOB-AE4IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on terminal block connectors. Embedded DSP allows for full mixing of the four Dante inputs/outputs and the two analog inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Two Gigabit switched ports allows for daisy-chained connection without any bandwidth bottleneck. One port provides Power-Over-Ethernet for direct power supply (alternate 12Vdc jack input can thus be used as redundant PSU). The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.