Cart
← Back to Product Catalog

Calrec – Artemis Shine

Mixers

More details

Similar Products

ctp-systems-DMIX30|ctp-systems-DMIX30
  • CTP Systems

CTP Systems – DMIX30

The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment. The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment. All six mixers have TFT bargraph metering which may be selected to either dBFS or PPM metering scales with appropriate ballistics.  The six mixer outputs are available over the Dante network but also as balanced analogue XLR outputs on the rear of the unit.  The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain to more Dante equipped devices.  A special feature of this unit is that any or all of the mixers may be remote controlled. The unit can accept up to six separate remotes each of which is assignable to any of or any combination of the mixers. Perfect for controlling remote sources such as radio talkback feeds.  The data from the remotes is encoded in a modified 'time code' signal so may be carried over any standard audio transport, including audio fibre channels. The remotes are available separately so may be added if and when required. The unit operates on 110-240VAC 50/60Hz with auto switching. Dimensions: 2RU 150mm deep.
    Mixers
See the product
allen-heath-dlive-c1500_1200px
  • Allen & Heath

Allen & Heath – dLive C1500

The C1500 is the first rack-mountable control Surface for the dLive MixRack. Packed in a tiny footprint are 12 faders over 6 layers, built-in audio I/O, an audio networking port, a 12«« capacitive touchscreen and the innovative Harmony UI for the fastest workflow in the industry.
    Mixers
  • Dante Ch: 64x64
  • 24-bit
See the product
digico-sd5_1200px|digico-sd5_1200px
  • DiGiCo

DiGiCo – SD5

Like the SD10, the SD5's 37 faders are laid out in three convenient banks of 12 with one master fader with the added benefit of three 15-inch full colour TFT touch screens for even quicker access and multi-user applications. Like the SD10, the SD5's 37 faders are laid out in three convenient banks of 12 with one master fader with the added benefit of three 15-inch full colour TFT touch screens for even quicker access and multi-user applications. In addition, there are two interactive dynamic metering displays (IDMs) as used in its big brother, the SD7. The centrally located master screen has been incorporated into the worksurface meterbridge design to provide a lower profile meter bridge and allow for complete user feedback; this means the engineer never needs to move far from mix position: there is clear visibility of everyone on stage, and all control is less than an arm's length away. To make life even easier, engineers can recall or save presets on the channel strip; and recall or save snapshots using the master screen or or dedicated switches on the console. In addition, special functions can be assigned and accessed instantly via the console's 40 Smart Key Macros (accessible via four layers of 10 RGB backlit keys) at the push of a button. It really is that simple.
    Mixers
  • Dante Ch: 64x64
  • 24-bit
See the product