Product Information
Dante card for Panasonic’s WR-DX100, WR-DX400, WP-DN360, and WP-DN700.
Dante card for Panasonic’s WR-DX100, WR-DX400, WP-DN360, and WP-DN700.
Similar Products
- RTS
RTS – OMI ADAM Matrix Card
This card fits into the standard slots of the RTS ADAM or ADAM-M frames and provides a gateway to the world of OMNEO IP-compatible networking. The card consists of the traditional ADAM front and back card components.
- Dante Interface Cards
- Dante Ch: 64x64
- AES67 Enabled
- Kingray
Kingray – MDT22-E1
▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO
▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec
▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,
▲ I2S digital audio format
▲ Freely set the sampling rate and equipment name
▲ Network audio transmission and control use standard Category 5 network cable (CAT5)
▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats
- Dante Interface Cards
- Sennheiser
Sennheiser – EM 9046 DAN option card
The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks.
The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card.
Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card
- Dante Interface Cards
- Dante Ch: 16x0
- 24-bit