Cart
← Back to Product Catalog

Auvitran – AVDT-BOB-AE4IO

I/O Interfaces

More details

Similar Products

rdl-ddb-bn2m_1200px
  • RDL

RDL – DDB-BN2M

The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block.  The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2M in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN2M is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN2M’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product
ALF-DAIO-USB
  • Alfatron Electronics

ALF-DAIO-USB

The ALF-DAIO-USB USB to Dante I/O adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world's most popular audio networking solution. The Dante I/O Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. Each adapter is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product
image007
  • BARE

BARE – DCS-100C/D

1. Exquisite and elegant design, ergonomic, very modern. 2. Original D-net IOT digital conference IoT system technology, in line with IEC60914 international standard 3. With priority button function, you can turn off the representative unit that is speaking. 4. The microphone is equipped with an ultra-quiet electronic touch switch, which can avoid the mechanical sound amplification of the switch, and can control the operation of the microphone. The microphone has a bright luminous halo to indicate the working status. 5. The unique audio processing circuit improves the clarity of the entire system. 6. Fixed square array microphone pole with variable directivity. 7. The chairman unit can use the priority button (Priority) and the approval button (Permit) to control the speaking sequence and control the meeting atmosphere. 8. The self-developed technology of D-net IOT digital conference IOT system realizes five adjustable modes of directivity of the pickup microphone: omnidirectional, cardioid, super-cardioid, sharp-hearted, Figure- 8-pointing type; 9. Two-color LED indicator light, green when speaking; 10. The unit comes with a 2m Category 6 RJ45 network cable; 11. Independently adjust the microphone gain, which can be adjusted on the microphone or computer management software, so that speakers with different volumes can speak more smoothly; 12.1 Ø 3.5 mm stereo headphone jack can be connected to headphones. 13. The unique ID number of the microphone unit can be manually assigned to the conference unit by the conference system.
    I/O Interfaces
See the product