Product Information
Specifications
- Dante Ch: 64x64
- Bit Depth: 24-bit
- Sample Rate: 44.1kHz, 48kHz, 96kHz
- AES67 Enabled
Calrec – BI6192
Similar Products
- Sennheiser
Sennheiser – EM 9046 DAN option card
The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks.
The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card.
Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card
- Dante Interface Cards
- Dante Ch: 16x0
- 24-bit
- Avid
Avid – Pro Tools MTRX 128-Channel IP Audio Dante Module
Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz)
Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz)
- Dante Interface Cards
- Dante Ch: 128x128
- 24-bit
- DiGiCo
DiGiCo – DMI-DANTE64@96
The DiGiCo DMI-DANTE64@96 allows 64 channels in and 64 channels out at both 48kHz and 96kHz. It has a Primary and a Secondary port, both of which are Ethercon ports, and an RJ45 Control port. The card has two modes that can be changed in Dante Controller. In Switched Mode, the three ports are switched together. In redundant mode, the Control and Primary ports shall be switched together and work as a redundant pair with the Secondary port, each having separate IP addresses so that if the primary connection fails, the secondary connection will take over.
- Dante Interface Cards
- Dante Ch: 64x64
- 16-bit, 24-bit, 32-bit