The GMS 3164 Dante is a professional monitoring system for Dante networked audio systems.
The GMS 3164 Dante is a professional monitoring system for Dante networked audio systems. A pre-selection of up to 64 channels are displayed in various metering modes on the unit as well as over a LAN line on an external monitor. External monitoring allows besides live metering also time line tracking of up to 10 minutes. The unit lets you monitor 64 individual channels, combine 1-64 channels into groups, merge 1-64 channels into 16 mixers and, if desired, combine those mixers again into groups. Built-in speakers and headphone allow “follow” or “fix channel” mode. There is the possibility to connect external speakers and an external meter.
The MA1001 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The MA1001 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The speaker uses the Dante digital audio interface and the POE network to power the power amplifier module. Only one network cable is needed to supply the audio signal and power simultaneously.
The MA1201 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The MA1201 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The result of years of development, the MA1201 is a pioneer in speaker technology. Through the implentation of Dante technology, this speaker recieves both power and audio through a single cat 5e cable.
With the Eajax QC-102D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-102D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-1012D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-1012D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
Through the Dante interface, the delay index of the network audio data is excellent, and the number of audio channels carried by the single network line terminal reaches 64 channels of input and 64 channels of output.
With the Eajax QC-108D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat 5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-108D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat 5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-106D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-106D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-104D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
With the Eajax QC-104D/P and Dante technology, digital audio transmission and power can be simultaneously realized through one cat.5e network cable, without the need for additional power amplification equipment.
The DMIC01 network microphone has built-in Dante and PoE modules. Direct access to the Dante network provides a low latency, high precision and low cost solution for point-to-point audio connections.
The DMIC01 network microphone has built-in Dante and PoE modules. Direct access to the Dante network provides a low latency, high precision and low cost solution for point-to-point audio connections. In conjunction with Audinate's Dante Controller software, the visual display of the matrix map provides users with a clear and easy-to-use experience.
The MA602 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The MA602 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The speaker uses the Dante digital audio interface and the POE network to power the power amplifier module. Only one network cable is needed to supply the audio signal and power simultaneously.
The MA601 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The MA601 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The speaker uses the Dante digital audio interface and the POE network to power the power amplifier module. Only one network cable is needed to supply the audio signal and power simultaneously.
The MA801 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The MA801 is a coaxial full-range speaker with network transmission and a pure digital power amplifier.
The speaker uses the Dante digital audio interface and the POE network to power the power amplifier module. Only one network cable is needed to supply the audio signal and power simultaneously.
ARES8d HQ is a dual 8’’ enclosure line array with and 1.4’’HF driver and a 3’’ voice coil. Its B&C driver coupled to a waveguide provides a true cylindrical dispersion.
Thanks to its dedicated class D Powersoft amplifier and AUDIOFOCUS OEM DSP treatment (96kHz-40 bits floating point) with 24 presets, one cabinet can reach a peak level of 143 dB SPL (preset 64m).
System designer and sound engineer can control and monitor every speaker individually thanks to AUDIOFOCUS Network manager software and for more demanding needs the Dante version constitute the optimal needed tool to significantly boost sonic performances.
Thanks to dedicated custom AUDIOFOCUS presets, coupling and distance compensation are already calculated, making the deployment of the system faster and totally Plug and Play.
The M70WD is a steerable, flush-mount condenser microphone designed for distance miking in a variety of applications, including video conferencing, distance learning, hospital rooms, surveillance, and ambient room miking. The flush-mount configuration and a footprint of only three inches in diameter allow the M70WD to virtually disappear.
The M70WD capsule is housed within a patented cradle that allows the microphone to be aimed up to an angle of 45 degrees. Other features include a fully integrated preamp and an extremely high sensitivity rating of 38 millivolts. In addition, the M70WD has complete immunity from RF interference caused by cell phones and GSM devices. Installing the M70WD requires just one 2-inch hole in the ceiling, with no additional tools needed.
Features
High output for distance miking
Aimable up to a 45-degree angle
Miniaturized integrated preamp circuitry
Immunity from RF interference
Two-color LED status indicator
RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
No external power adaptor required
Designed, assembled, and tested by Audixin the USA
3-year warranty
Dante Made Simple - By Audix
The M70WD is designed exclusively for the Audix Dante | AES67 Integrated Microphone System , which delivers high-quality audio and all microphone functions - including on-off contact closure and LED status indicators - through a single CAT5 - CAT7 cable with RJ45 connections. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost. And like all Audix microphones in the system, the gain structure is optimized for its intended use, providing quality audio at the DSP. The result is true plug-and-play installation.
The M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.
Installing the M55 requires just one 5/8-inch hole in the ceiling, with no additional tools needed. The M55's mounting hardware easily adjusts the hanging height up to four feet from the ceiling surface without removing ceiling tiles and allows for fingertip height adjustment and roHigh output allows distance miking.
Features
Optimized for voice recognition
Low-noise preamp circuitry
Immunity from RF interference
Two-color LED status indicator
RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
No external power adaptor required
Designed, assembled, and tested by Audix in the USAtation control. An optional aiming clip (MCHANGER) easily makes any additional angular adjustments
Dante Made Simple - By Audix
The M70WD is designed exclusively for the Audix Dante | AES67 Integrated Microphone System , which delivers high-quality audio and all microphone functions - including on-off contact closure and LED status indicators - through a single CAT5 - CAT7 cable with RJ45 connections. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost. And like all Audix microphones in the system, the gain structure is optimized for its intended use, providing quality audio at the DSP. The result is true plug-and-play installation.
The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.
The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.
Audio Features
Compatible with all Audix RJ45-equipped, single-element, analog microphones
High-fidelity 24-bit, 48kHz audio
Balanced audio inputs with RFI filtering
48V phantom power output
Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
All channels controlled independently
Flash memory prevents loss of settings in the event of power loss
Dante® Features
Supports AES67 audio streams
Dante Domain Manager (DDM) ready
Dynamic or static IP address
Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications
Power Features
Operates on PoE from any IEEE 802.3af compliant equipment
The DN43 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.
The DN43 features one microphone input specifically designed for the Audix M3 tri-element microphone and one input for Audix RJ45-equipped, single-element microphones. It has two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.
Audio Features
High-fidelity 24-bit, 48kHz audio
Balanced audio inputs with RFI filtering
48V phantom power output
Each channel has selectable pre-amp gain, as well as low- and high-pass fi lters
All channels controlled independently
Flash memory prevents loss of settings in the event of power loss
Compatible with the M3 tri-element microphone (DN43 only), the flush-mount,
steerable M70WD ceiling microphone, and the M55WD ceiling microphone
Dante Features
Supports AES67 audio streams
Dante Domain Manager (DDM) ready
Dynamic or static IP address
Evaluated to the requirement of UL2043
and is suitable for use in above-ceiling
applications
Power Features
Operates on PoE from any IEEE 802.3af compliant equipment
BR-4*4IO Dante audio converter box is equipped with 4 line/mic inputs, phantom power and balanced audio output. The gain, phantom power and mute on each input can be debugged by software. Dual backup network port design, external power supply. With many high-quality features, and no design, no need to learn. Provides a complete audio processing solution for the optimization of specific locations and systems. Suitable for Dante audio conversion to upgrade the traditional audio system.
Blustream's DA11AU has been designed to convert unbalanced or balanced 2ch analogue audio to Dante® digital signal. The DA11AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers, and Blustream Matrix or distribution products to be connected as a source within a Dante® network. The DA11AU is a plug & play device that is powered using PoE (Power over Ethernet) from any PoE network switch and supports AES67 RTP audio transport.
Bosch's OMN-ARNIS ARNI-S is an OMNEO interface that provides better scalability through the use of either a DHCP server or DNS server, which extends the use of PTP over multiple subnets. The ARNI-S supports redundancy, and up to 450 OMNEO nodes in a single subnet network, or up to 450 OMNEO nodes in each subnet of a routed network when used in conjunction with an ARNI-E device.
Bosch's OMN-ARNIE ARNI-E is an OMNEO Interface that provides better scalability through the use of either a DHCP server or DNS server, which extends the use of PTP over multiple subnets. It also supports redundancy, and up to 450 OMNEO nodes across a routed network with multiple subnets, or up to 10.000 nodes across 40 subnets when used in conjunction with an ARNI-S device in each subnet.
DiGiCo's DMI-Dante 64@96 card is a Dante Interface Card for its 4REA4, S-Series and select SD-Range sound consoles (SD12 and SD7 Quantum). Providing 64 input and 64 output channels at both 48KHz and 96kHz, the new DMI (DiGiCo Multichannel Interface) card is equipped with Primary and Secondary (backup) Gigabit Ethernet ports for connection and uniquely offers a Sample Rate Conversion feature. Natively allowing DiGiCo products to communicate with other devices on a Dante network, the DMI-Dante 64@96 effectively doubles the previous DMI Dante card’s I/O channel count at the higher 96kHz resolution.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
