Dante-enabled Product Catalog

Elytone's EAN-DA8X8 is a Dante-embedded preamp.

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-1P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-1P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-1P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-1P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

ZyPer4K AV decoder with an integrated Dante transmitter: Equipped with Dante technology, the ZeeVee ZyPer4K decoder will enable users to route any audio source within a ZyPer4K deployment to a Dante network. ZyPer4K AV decoder with an integrated Dante transmitter: Equipped with Dante technology, the ZeeVee ZyPer4K decoder will enable users to route any audio source within a ZyPer4K deployment to a Dante network. Dante audio over IP includes support for features such as “human” readable names for all connected devices, automatic device discovery, one-click routing and low deterministic latency. In addition, it provides stable performance and enables automatic reconnection of system components after power cycles. Like all Dante devices, the Dante transmitter found in the ZyPer4K decoder is managed by the Dante Controller application. This virtual patch panel provides for the convenient connecting of devices, clocking, sampling control and the ability to manually choose between unicast and multicast signal distribution. Audio from any ZyPer4K encoder can be routed directly to a ZyPer4K decoder and inserted onto the Dante network via the embedded Dante transmitter.

The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 is equipped with a Dante UltimoX4 audio input. Despite being very small, the new amplifier features the latest generation of Fohhn DSPs – integrated into both inputs and outputs. The MA-4.100 is perfectly suited for smaller audio applications:

• Conference rooms and -systems
• Small lecture theatres and class rooms
• Hotels and restaurants
• Integration into media boards
• Media sound for displays and videowalls
• Shops and retail
• Fitness centres
• Low-ohm public address systems
• Amusement parks
• Museums and exhibitions
• Delay- and near field amplification within larger systems
• Small churches and community halls

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 60W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.

MNS-AMP60XXA-2A MAX power 60W,  Which build-in AC 100-240V [50/60Hz] power module.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP6011A-2A] 1 Channel, 60W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP6012A-2A] 1 Channel, 2*30W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP6022A-2A] 2 Channels, 2*30W Output, [2 Pairs Speaker Terminals].

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.

MNS-AMP30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

The MONISMS MNS-8AXXWS-1P [MONISMS Model:MNS-8A11WS-1P / MNS-8A12WS-1P / MNS-8A22WS-1P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments.

MNS-8AXXWS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.

[Model:MNS-8A11WS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-8A12WS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-8A22WS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

The speaker is Power supply via POE+ (Power over Ethernet) power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with 6.25” coaxial 60W loudspeaker driver, MNS-6AXXCPS-1P [MONISMS Model:MNS-6A11CPS-1P / MNS-6A12CPS-1P / MNS-6A22CPS-1P] that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-6AXXCPS-1P is powered by standard POE+ and has a MAX power of 30 watts.

[Model:MNS-6A11CPS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12CPS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22CPS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

The speaker is Power supply via POE+ (Power over Ethernet) . The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with 4” 30W loudspeaker driver, MNS-4AXXOWS-1P that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-4AXXOWS-1P  is powered by standard POE+ and has a MAX power of 30 watts.

[Model:MNS-4A11OWS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-4A12OWS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-4A22OWS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

This is the perfect design of all-weather outdoor speakers; the perfect combination of elegance, sound, and durability. This whole aluminum, weatherproof designed withstands the hottest summer days and the coldest winter nights without any performance issues.
Designed for indoor and outdoor  surroundings, such as flowerbeds, around the yard , commercial streets, hotel corridors or blanketing outdoor spaces etc. offering omnidirectional full-range audio. MONISMS is the BEST choice for your outdoor audio solution.
The speaker is power supplied via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with a 3.25” 30W loudspeaker driver, MNS-3AXXOWS-1P has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-3AXXOWS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+ available, it can be powered through an external 19VDC power supply.

[Model:MNS-3A11OWS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-3A12OWS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-3A22OWS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

The MONISMS MNS-6A11iWS-1P is a POE Dante in-wall speaker suitable for conference roms, houses of worship, classrooms, etc.  The MONISMS MNS-6A11iWS-1P is a POE Dante in-wall speaker suitable for conference roms, houses of worship, classrooms, etc. 

• 1 Channel, Only Master DANTE Speaker
• Power Supply via PoE+ [IEEE 802.3at]
• Build-in Digital Audio Amplifier
• Frameless Flat Design, Magnetic Ultra-thin Grille
• Dante Domain Manager and AES67 Support
• CE and RoHS passed

The speaker's power is supplied via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system flexible and compatible with other audio network systems.

The system comes with 6.25” coaxial 60W loudspeaker driver, MNS-6AXXCS-1P [MONISMS Model:MNS-6A11CS-1P / MNS-6A12CS-1P / MNS-6A22CS-1P] has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-6AXXCS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+ source available,  it can be powered through an external 19VDC power supply.

[Model:MNS-6A11CS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12CS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22CS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

Elytone's EWD-EB01 Dante audio interface with Bluetooth/Wifi is a premium multi-IO wall plate. It features stereo Bluetooth wireless audio input connectivity along with a 3.5mm analog input. The audio input will be converted into 2 channels of signal for Dante network. Elytone's EWD-EB01 gives you wireless access to your favorite music services like Spotify and Deezer, plus Internet radio stations through TuneIn, and your stored music library. They connect to your home Wi-Fi network so you can play music directly from the Internet to the system itself—or hear anything you want from a phone or tablet with audio casting technology. The EWD-EB01 is designed to Works with Alexa for voice control. Enjoy hands-free voice access to your music using any Alexa-enabled device like the Amazon Echo Dot. MULTIROOM STREAMING - Connect multiple EWD-EB01 around your home and stream fully synchronized audio around your home wirelessly or play different audio in each room all from one Smartphone or Tablet The EWD-EB01 is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power, control and audio data) is provided by a single CAT-5e/6 cable. The EWD-EB01 unique mix of consumer style wired and wireless connectivity allows easy connection of a wide variety of user devices to Dante network with no concern about ground loops or other audio problems common with consumer devices. 

The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. The D/A circuitry offers >120dB of dynamic range, audiophile quality. The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network. The D/A circuitry offers 120dB of dynamic range - ten times better than similar competing products. All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.

The Color Series feature a revolutionary customizable GUI in integrated full-color TFT displays. The Color Series advanced functionality is wrapped in a sleek, ergonomic design with a contoured bezel that fits flush within a rackmount configuration and looks great on the desktop. The Color Series keypanels sport advanced features that take flexibility and ease-of-use to the next level. The Color Series feature a revolutionary customizable GUI in integrated full-color TFT displays. The Color Series advanced functionality is wrapped in a sleek, ergonomic design with a contoured bezel that fits flush within a rackmount configuration and looks great on the desktop. The new RP-1000 features a stunning high-contrast HD TFT display with high-efficency LED backlighting and enhanced language support for system alphas

In terms of sound quality, operation, functionality, reliability, expandability, and more, the RIVAGE PM10 is a thoroughly refined flagship that defines the direction for future generations. It is a worthy heir to the PM name that brings true innovation to the evolving live sound scene. In the more than 40 years that have passed since Yamaha's first professional live sound console was released, the PM series has been responsible for a number of important milestones in the history of sound reinforcement. Many of those innovations have become standard tools that professionals depend on to this day. And now, launching a new generation of PM consoles, the RIVAGE PM10 is here. In terms of sound quality, operation, functionality, reliability, expandability, and more, the RIVAGE PM10 is a thoroughly refined flagship that defines the direction for future generations. It is a worthy heir to the PM name that brings true innovation to the evolving live sound scene.

Active Column Speaker with DANTE® Input Active Column Speaker with DANTE® Input The internal digital signal processor also enables a compressor, a gate, a 10 band parametric equalizer and a delay to be placed into the audio input path. With simple Windows software every parameter can be set in real time. All speakers are recognized within a network by their IP Address. ALX cabinets can be fully monitored for surveillance issues. Thanks to its very small and unobtrusive enclosure the AIMLINE Speaker is a fit for most architecturally sensitive environment including museums, churches, conference rooms and many more challenging spaces and environments. With its two channel DANTE® input integration into existing IP networks as well as a direct integration to other DANTE® enabled products is simple. The ALX series will be built in a version for the installation market as well as in a version for rental market.

The KP 12 CLD is the latest addition to the revolutionary CLD color keypanel series by RTS. The keypanel includes several cutting-edge features designed to enhance capability and ease of use. The instinctive graphic interface is housed inside two full-color 4.2” LCD displays. The front panel also features conveniences such as a user-programmable button, one-touch listen volume adjustment on each of the 14 new multifunction keys, and a backlit keypad. Like all RTS products, the KP 12 CLD is designed with expansion in mind. The front-mounted USB port and modular rear panel allow for future upgrades that will keep the KP 12 CLD on the forefront of technology for years to come. Features of the KP 12 CLD include:

• Full color LCD displays - The new displays host a rich and intuitive graphic user interface that shows different keypanel functions with different colors and graphic icons.
• Modern, modular design - The flat front panel is thoughtfully designed to fit easily into any control room or truck application. The back panel is optimized for future expansion.
• Multi-directional keys - The keypanel features 14 multi-directional keys, 12 used for talk, listen, and emulation of traditional level control function.
• Future expansion - The KP 12 CLD is designed to host for an expansion panel and optional connections to the matrix through current and future standard transmission formats.
• Enhanced Features - The KP 12 CLD supports up to three auxiliary inputs, independent digital gain control for microphone sources, configurable audio routing and much more through an option board
• DSP processing - Acoustic Echo Cancellation, Equalization, Mixing, Filtering, and Metering
• USB - For future expansion and other planned interface features.
• User programmable button - A user-programmable button (UPG-1) provides custom shortcuts to menu functions.
• GPI expansion unit available - The GPI expansion unit provides additional connectors for Relay, Headset, Footswitch/Speaker, Mic In/Out, Auxiliary, and other functions.

DLM-808 is an audio matrix processor, with 8 input and 8 output channels, with high-definition LCD to display current status at real time, with network port to expand network devices. It is available for large-scale place, such as theater, broadcast hall, gymnasium and conference center and so on. Its function can be summary as below:

1. All input channels are equip with GATE/EXP/CROSSOVER/PEQ/DELAY/COMPRESSOR function .
2. All input channels are equip with Gain/Crossover/PHASE/PEQ/DELAY/COMPRESSOR function
3. 8*8 audio matrix
4. With 8 channels in and 8 channels out audio interface expansion card (DANTE).
5. Match with PC and App operation software, which is convenient for user.
6. User can on-line update DSP and MCU Firmware via internet.

TASCAM’s DA-6400 is a compact 64-channel digital multitrack recorder/player for Live and Broadcast applications. TASCAM’s DA-6400 is a compact 64-channel digital multitrack recorder/player for Live and Broadcast applications. The DA-6400 is an all-new 64-track recorder that records to an internal SSD drive caddy for live and event recording. Professional I/O options like MADI and DANTE make it ideal for live recording, event capture, or as a backup for critical DAW sessions. Available with a single or dual/redundant power supply, the DA-6400 is an unbeatable option for professional remote recording.  

When more than one device is used in a room, Stem Hub becomes the brains of the operation. Hub enables multiple units in the room to communicate with each other to function as an ecosystem. With USB Type B, Ethernet, Dante, VoIP, and pluggable terminal blocks, Hub has all your bases covered. When more than one device is used in a room, Stem Hub becomes the brains of the operation. Hub enables multiple units in the room to communicate with each other to function as an ecosystem. With USB Type B, Ethernet, Dante, VoIP, and pluggable terminal blocks, Hub has all your bases covered. Features

• Acts as the main brain when multiple units are in the same room
• Dante-enabled
• Power over Ethernet (PoE)
• USB Type B
• VoIP connectivity
• Pluggable terminal block
• Wall mountable
• Connects up to 12 products per room
• Dimensions: 7" x 1.5" to 1"

AES367 is a bridge between AES/EBU and AOIP, it can convert 16-channel AES/EBU balance input into AES67 signal and reversely. AES367 is a bridge between AES/EBU and AOIP, it can convert 16-channel AES/EBU balance input into AES67 signal and reversely. It supports 32 kHz to 192 kHz sample rate, and the sample depth can reach up to 24 bit. It has a very low jitter clock recovery mechanism ,and the data is in accordance with AES3 and AES67 interface standard.

The MONISMS MNS-18011CPS speaker is specially designed for PA systems based on Dante audio networks. It is a Cylinder Pendant Speaker (whole aluminum) for open architecture ceilings and other locations where a pendant form factor is desired. The MONISMS MNS-18011CPS speaker is specially designed for PA systems based on Dante audio networks. It is a Cylinder Pendant Speaker (whole aluminum) for open architecture ceilings and other locations where a pendant form factor is desired. The speaker features a Class-D amplifier, with a maximum digital input signal, the amplifier will provide 30W power. MONISMS MNS-18011CPS is a Dante™ audio network addressable and self-amplified Cylinder Pendant Speakers system.

This product has reached "end-of-life" and is discontinued by the manufacturer The MONISMS MNS-10811WS is perfect design of all-weather outdoor speakers that are the perfect combination of elegance, sound, and durability, this whole aluminum, weatherproof designed, to withstand the hottest summer days and the coldest winter nights without any performance issues.

The MONISMS MNS-30011RWFS speaker is Power supply via POE+ (Power over Ethernet) or DC24V power supply, available at option.  The MONISMS MNS-30011RWFS speaker is Power supply via POE+ (Power over Ethernet) or DC24V power supply, available at option. The speaker includes a Class-D amplifier which provides effective use of power. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems. The network system is also Dante Domain Manager Ready. The system comes with 3.5” coaxial 30W loudspeaker driver, MNS-30011RWFS that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications. This assembly can be used in wide range of projects for paging and background music applications.

The MONISMS MNS-6522CS Speaker is specially designed for PA systems based on Dante audio networks. It is suitable for installation into a lightweight celing. The MONISMS MNS-6522CS Speaker is specially designed for PA systems based on Dante audio networks. It is suitable for installation into a lightweight celing. the 2-way speaker units allows for a high-quality music and meets high musical standards and a Class-D amplifier, And  Power supply via PoE+ [Power over Ethernet, IEEE 802.3at- 2009] or DC24[3.75A]  power supply [ option ].