Cart
← Back to Product Catalog

MONISMS – MNS-AMP60XXA-2D

Amplifiers

More details

Similar Products

Inter-M_-_PMU_120N_1
  • Inter-M

Inter-M – PMU 60N

The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.
    Amplifiers
See the product
nam2i-top-trans-small
  • r2p

r2p – Netspire NAM2i

The NetSpire™ NAM2i is an intelligent, network enabled amplifier. The device receives network digital audio and provides output to speakers using two integrated 12 watt Class D amplifiers, digital signal processing, and digital voice announcement.

The NetSpire™ NAM2i devices are housed in IP66 rated enclosures suitable for installation in harsh, outdoor, and rolling stock environments, where immunity from dust, water and physical deformation is required.

The NAM2i units integrate seamlessly with the NetSpire system and allow audio zones to be created anywhere a connection to the network is available. Each speaker is connected to an independent audio channel, and can be assigned to separate announcement zones or grouped in the same zone. The NAM2i can be configured to perform a different series of audio processing functions on each of the output channels. The 24bit DSP can perform the following configurable chains of audio processing functions on each channel:

  • Delay
  • Gain adjustments
  • Dynamic Range Compression & Expansion
  • Power Limiting
  • Parametric Frequency Equalisation

The NAM2i units also have a single balanced audio input which can be used to connect an Ambient Noise Sensing Microphone (ANC). The microphone is used to measure the ambient noise conditions of zone and adjust the volume of announcements automatically to compensate.

The NAM2i housing is IP66 rated, and encompassess the cable terminations on the NAM2i carrier bracket.

    Amplifiers
See the product
duran-audio-industryamp-PB-800-dn|duran-audio-industryamp-PB-800-dn
  • Duran Audio

Duran Audio – IndustryAmp PB-800-DN

The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems.  The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.
    Amplifiers
See the product