The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.
The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.
Dante network support
8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
Up to 4 units can be connected per system
PoE powered
Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)
The DARK8MAI is a portable robust PoE powered 8 channel microphone pre-amp with Windows 10 app for remote control of gain.
The DARK8MAI (Microphone Analogue Input) is a very powerful Dante network audio interface, in a robust stage box/ throw down style. It has a 8 off low noise mic/line inputs which are remotely controlled by a Windows 10 app. The outputs of the microphone amplifiers are transmitted on a fully redundant Dante network interface.
Having 8 off low noise high quality microphone inputs makes the DARK8MAI perfect for transporting audio circuits from a stage or a pitch side position to a mixer or other location within a Dante network .
The rugged design, PoE powering & remote control facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.
Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals
Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals. Making their debut with the new C and T Series point source loudspeakers, Renkus-Heinz SA Series amplifiers will ultimately enable all Renkus-Heinz loudspeaker models to be freely combined, offering full networking capabilities, RHAON II control and monitoring, and connection via a choice of Analog, AES/EBU, or Dante single or redundant network input.
Renkus-Heinz SA Series amplifiers will be available in three models:
the SA-625 amplifier outputs 500W + 125W
the SA-1250 outputs 1,000W + 250W
the SA2000 delivers a total of 2000W
With power to spare, SA 625 Series amplifiers deliver more than enough Wattage to easily drive additional CX loudspeakers, SA 1250 and 2000 models are equipped with line voltage looping.
All SA Series amplifiers are equipped with native DSP, including delay, equalization, multi-channel limiting, and noise reduction, with nine available preset memories. Available connectivity configurations include Analog input, as well as RHAON II control and monitoring Dante with either Single or Redundant network Further, networking connectivity in copper and optical formats.
The VIO 4K is engineered to be road-hardened to survive demanding live event environments. It provides worry-free operation with maximum uptime and low maintenance.
The VIO 4K is engineered to be road-hardened to survive demanding live event environments. It provides worry-free operation with maximum uptime and low maintenance. VIO 4K features an exclusive high-quality processing engine to ensure crisp and natural images, whatever the source and the scaling level are while maintaining ultra-low latency processing as low as 1 frame. The product includes three slots for optional I/0 interfaces to provide optimum versatility and double or triple the output capability of the VIO 4K. It is designed to process a single source currently to all three outputs.
VIO 4K is also available with a Dante audio interface supporting up to 8 bi-directional Dante audio channels.
The TesiraFORTÉ VT is a digital audio server with 12 analog inputs and 8 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 12 inputs.
The TesiraFORTÉ VT is a digital audio server with 12 analog inputs and 8 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 12 inputs. It includes up to 8 channels of configurable USB audio, a 2-channel VoIP interface, and a standard FXO telephone interface. TesiraFORTÉ DAN VT adds Dante digital audio networking.
32 x 32 channels of Dante (DAN model only)
12 mic/line level inputs with AEC, 8 mic/line level outputs
Gigabit Ethernet port
RS-232 serial port
4-pin GPIO
2-line OLED display with capacitive-touch navigation
Rack mountable (1RU)
System configuration and control via Ethernet
Internal universal power supply
SIP VoIP interface via RJ-45 connector
Standard FXO telephone interface via RJ-11 connector
Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, and delay
The TesiraFORTÉ DAN VT4 is a digital audio server with 4 analog inputs and 4 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 4 inputs.
The TesiraFORTÉ DAN VT4 is a digital audio server with 4 analog inputs and 4 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 4 inputs. Each model also includes up to 8 channels of configurable USB audio, a 2-channel VoIP interface, and a standard FXO telephone interface. TesiraFORTÉ DAN VT4 includes Dante digital audio networking.
32 x 32 channels of Dante (DAN model only)
12 mic/line level inputs with AEC, 8 mic/line level outputs
Gigabit Ethernet port › RS-232 serial port
4-pin GPIO
2-line OLED display with capacitive-touch navigation
Rack mountable (1RU)
System configuration and control via Ethernet
Internal universal power supply
SIP VoIP interface via RJ-45 connector
Standard FXO telephone interface via RJ-11 connector
Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, and delay
The VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel.
The VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel.
The high quality microphone input, with the Glensound Referee compressor, makes the Vita Plus suitable for on air commentary use, perfect for a small OB or in an off-tube booth .
The flexibility of the talk button configurations, means that the Vita Plus can also be used as a talkback unit as part of a Dante network.
The Vita Plus can connect to any Dante network, or to other audio equipment via Glensound’s own Dante interface units.
Features
Complete commentary functionality and 4W in a desktop format
Dante AoIP network
Input is switchable from line, mic, or mic + 48v phantom power
Low noise, high headroom mic amplifier
48K 24bit A/D converter
Headphone output on 6.35mm jack socket
Two outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45/CAT5 network audio connection
Independently configurable buttons for both outputs using Config+: latching, momentary or lazy
Two inputs for headphone monitoring from network audio connection, both with adjustable level
Headphone inputs have left/both/right switching
Glensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.
Experience versatile audio analysis functions, flexible matrix conversion tools and a pair of powerful speakers packed into 1 RU with the new Marshall AR-DM61-BT Multi-Channel Digital Audio Monitor.
Experience versatile audio analysis functions, flexible matrix conversion tools and a pair of powerful speakers packed into 1 RU with the new Marshall AR-DM61-BT Multi-Channel Digital Audio Monitor. The AR-DM61-BT is a powerful audio/video QC solution designed specifically for TV stations, broadcast trucks, transfer stations and house of worship facilities.
Marshall consulted directly with broadcast engineers and systems integrators to develop a practical and flexible solution that packs versatile audio analysis functions, flexible matrix conversion tools and a pair of powerful (~100 dB) speakers into a single rack unit (1 RU). The first audio rack unit with an intuitive 10” wide LCD touchscreen in the industry, the AR-DM61-BT can display up to 64 audio channels from multiple signal types and includes a built-in live video preview confidence monitor.
The AR-DM61-BT supports four dedicated 3GSDI inputs with loop-through (one MADI compatible), one HDMI input, eight balanced analog audio inputs, four stereo AES inputs and eight channels RCA output. Cleverly designed sealed speaker enclosures maximize output in a small form factor for use in noisy control room environments where economic use of rack space is crucial.
Planned software upgrades and optional hardware extension ports enable the AR-DM61-BT to serve as a "future proof" solution that will evolve with the ever-changing requirements of the broadcast A/V industry. Additional features include support for the latest Dolby™ formats, Dante™ networked audio technology and a built-in web server for storing and retrieving presets.
This product has reached "end of life".
The digiMIX24 Digital Mixing Console gives you complete control over your performance space. Light and portable, it’s easy to transport or store away―whether you’re mixing live bands, a high school musical, a worship service, or recording in a project studio―there are many applications where digiMIX24 feels right at home.
With its traditional analog feel, the Live Control Surface allows optimum control with real knobs and a live fader when selecting important functions, while offering conveniences of a responsive touchscreen, USB interfacing, and companion Apple iPad® App. Together, its the ideal mixing experience.
The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks.
The VERTO series make integration of digital ADAT and MADI into an existing DANTE network really easy. The compact enclosure of 1RU height and a ½-19“ width saves a lot of rack space. Every VERTO device features word clock I/O for external synchronization and is remote controllable via MIDI or MIDI-over-MADI (VERTOMX). No matter if used together with our A16 MKII, A32 or Pulse16, or a converter from another brand – simply connect to the VERTO via ADAT or MADI – and you’re ready to go!
Remote Control Via the Dante Network
Both the VERTO series and all other converters from Ferrofish can be remotely controlled via the DANTE Network. If all devices are connected via MIDI, the VERTO converts all DANTE audio streams to ADAT or MADI and the control commands sent over DANTE into MIDI remote control messages. The VERTOMX offers an additional feature: Instead of a separate MIDI Port the MIDI messages are extracted from the MIDI-over-MADI port.
The Verto series comprises of:
The Optimod-FM 8700i air processor comes with Dante AoIP with AES67 capability, a low-latency headphone output and Xponential Loudness algorithm.
The Optimod-FM 8700i air processor comes with Dante AoIP with AES67 capability, a low-latency headphone output and Xponential Loudness algorithm.
The suite of features that are available with the Optimod-FM 8700i include Orban’s MX distortion-canceling peak limiter; digital MPX; subharmonic synthesis and phase skew correction; a controls for stereo enhancement, multipath reduction, HF enhancement, EQ, AGC, multiband compression, stereo encoding, low-IM peak limiting and composite limiting; full function RDS/RBDS with PS scrolling; ratings processor loop-through; and an automated dayparting with an NTP-reference real-time clock. SNMP features allow for monitoring of status and sending of alarm notifications to a network via an Ethernet connection.
LIDSA32 (Immersive Digital Surround Amplifier-32 Channels) belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS.
SMA-OBIA belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS.
Each digital-analog conversion will produce a loss of sound, SMA-OBIA link reduces DAC conversion link. So our structure is more rational, more integrated. The sound of the output will be direct, dynamic amplitude larger, transient better. It effectively overcomes defects of the traditional analog amplifier (such as big volume, big distortion, low power efficiency, etc.). Its power utilization rate can be up to 95%.
Features:
High integration,32 channels output
High power output, attain to cinema level
Digital input interface
32 channels analog output
Over-current protection, overvoltage protection, over temperature protection
Adjust acoustic gain, status display, BTL-PBTL mode switch of per channel by network protocol
With the mc²96, the mc² platform is pushed beyond limitations, culminating in a pure, unparalleled audio production tool dedicated to those who can tell the difference. Whether its intended to be used in broadcast, theater or recording – in each of these applications it stands out with a unique set of features.
PURE, PRECISE, PEERLESS. With the mc²96, the mc² platform is pushed beyond limitations, culminating in a pure, unparalleled audio production tool dedicated to those who can tell the difference. Whether its intended to be used in broadcast, theater or recording – in each of these applications it stands out with a unique set of features. The mc²96 provides optimized performance within IP video production environments with native SMPTE 2110 support.
In addition to standard channel labeling via channel numbers, individual text labels and static pictures or icons, the mc²96 also features LiveView™ video thumbnails for even more intuitive channel identification. Simply touch a fader and the LiveView™ thumbnail changes to full-screen mode, providing a more detailed view of that channel’s video source such as a camera or a replay machine.
The MD-4 4x4 Analog-to-Dante Interface with Headphone Monitor is a simple, high-performance interface for connecting analog audio to Dante™ audio networks.
The MD-4 4x4 Analog-to-Dante Interface with Headphone Monitor is a simple, high-performance interface for connecting analog audio to Dante™ audio networks.
Four high-gain microphone or line-level inputs are available for connection to a Dante audio network. Additionally, four Dante signals can be sent to its four balanced analog outputs. Inputs or outputs can be routed to headphones for signal monitoring and metering. The MD-4 is an ideal companion in a rack with the Sound Devices 970 audio recorder.
Key Features:
Four front-panel, balanced, analog, mic or line level inputs with 48 V phantom power and high-pass filter
Inputs accept mic or line level, and appear as Dante sends (transmit)
Eight-segment LED meter for each input
Four Dante signals (receiver) to four rear-panel XLR balanced-analog outputs
Headphone monitoring with LED level meters, with front and rear panel headphone output
Built-in AC power supply (100-240 V, 50/60 Hz on IEC C14) or 11-18 VDC powering (4-pin XLR)
With breakthrough RF performance and wide tuning up to 184 MHz, AD series wireless handheld and bodypack transmitters put professional quality digital audio within reach.
Incorporating the most innovative wireless audio technology in the world, Axient Digital was engineered from the ground up for professional productions that demand flawless execution. With an unprecedented level of signal stability and audio clarity, plus flexible hardware options, advanced connectivity, and comprehensive control, it’s a wireless system built to take on the challenges of today—and tomorrow. Both AD series and ADX series transmitters are compatible with a shared Axient Digital receiver platform. This scalable wireless system includes a groundbreaking micro-bodypack and provides incomparable sound for a wide range of applications and settings. Axient Digital defies limitations for both RF and audio quality. With industry-leading low latency, transparent frequency response, and wide dynamic range, Axient Digital lets nothing get in the way of true, pure sound. No matter the setting, you'll hear Shure audio quality you can count on.
ADX transmitters set the stage for exceptional performance, featuring wide tuning up to 184 MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth.
Incorporating the most innovative wireless audio technology in the world, Axient Digital was engineered from the ground up for professional productions that demand flawless execution. With an unprecedented level of signal stability and audio clarity, plus flexible hardware options, advanced connectivity, and comprehensive control, it’s a wireless system built to take on the challenges of today—and tomorrow. Both AD series and ADX series transmitters are compatible with a shared Axient Digital receiver platform. This scalable wireless system includes a groundbreaking micro-bodypack and provides incomparable sound for a wide range of applications and settings. Axient Digital defies limitations for both RF and audio quality. With industry-leading low latency, transparent frequency response, and wide dynamic range, Axient Digital lets nothing get in the way of true, pure sound. No matter the setting, you'll hear Shure audio quality you can count on.
Wohler Technologies has been in the business of in rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise.
Flexible. Adaptable. Future Proof.
Specifically designed for fast-paced OB, studio and live-to-air production environments, iAM-MIX provides intuitive audio signal monitoring with instant access to 8 stored configurations of any user-defined channel groups for easy navigation between up to 64 channels.
iAM-MIX comes equipped with Analog audio, AES and MADI inputs with options for 3G/HD/SD-SDI and multimode or singlemode fiber MADI interfaces and allows any source format to be routed to the front panel controls for monitoring and mixing. Choose from either 8 or 16 level controls both with an independent master level control and instant mute capability. Individual OLED display indicators show status, presence metering and channel name – which can be manually edited or automatically read from a network connected router.
Multiple units on the same network can be controlled via a browser-based user interface that supports fast configuration with role-based authentication to protect critical configurations. iAM-MIX is the perfect solution for any application that requires a simple, compact solution for monitoring a range of audio signals. Units are available with either 8 or 16 controls.
FEATURES & BENEFITS:
Fast selection and summing of up to 16 audio channels
Intuitive front panel with 8 or 16 individual level controls and quick muting
Channel names can be displayed for each input
Store and retrieve presets via USB or remote software control
Built-in speakers, headphone jack, USB and Ethernet ports
A range of useful connectors, including SFP slots for future I/O support
Open API for remote control, logging and setup
Apply software feature upgrades with zero downtime
Wohler Technologies has been in the business of in rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise.
Flexible. Adaptable. Future Proof.
Specifically designed for fast-paced OB, studio and live-to-air production environments, iAM-MIX provides intuitive audio signal monitoring with instant access to 8 stored configurations of any user-defined channel groups for easy navigation between up to 64 channels.
iAM-MIX comes equipped with Analog audio, AES and MADI inputs with options for 3G/HD/SD-SDI and multimode or singlemode fiber MADI interfaces and allows any source format to be routed to the front panel controls for monitoring and mixing. Choose from either 8 or 16 level controls both with an independent master level control and instant mute capability. Individual OLED display indicators show status, presence metering and channel name – which can be manually edited or automatically read from a network connected router.
Multiple units on the same network can be controlled via a browser-based user interface that supports fast configuration with role-based authentication to protect critical configurations. iAM-MIX is the perfect solution for any application that requires a simple, compact solution for monitoring a range of audio signals. Units are available with either 8 or 16 controls.
FEATURES & BENEFITS:
Fast selection and summing of up to 16 audio channels
Intuitive front panel with 8 or 16 individual level controls and quick muting
Channel names can be displayed for each input
Store and retrieve presets via USB or remote software control
Built-in speakers, headphone jack, USB and Ethernet ports
A range of useful connectors, including SFP slots for future I/O support
Open API for remote control, logging and setup
Apply software feature upgrades with zero downtime
Wohler Technologies has been in the business of in-rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise.
Flexible. Adaptable. Future Proof.
iAM-VIDEO is designed to be easy to operate yet powerful enough to provide high quality, intuitive monitoring of multiple signal types within a compact form factor.
iAM-VIDEO is equipped with a variety of metering options and supports Analog, AES3 and MADI inputs, with options for VoIP formats including MPEG2/4 TS and SMPTE 2022, AoIP formats including Dante™, Ravenna™ and AES67, 3G/HD/SD-SDI and a growing range of additional I/O options via an SFP interface.
High quality touch screen panels allow for elegant and intuitive control, with simple to navigate menus and configuration. Physical front panel controls provide access to main and auxiliary volume controls, balance control and a front mounting USB port for simple software updates.
All iAM Series monitors are built with an on-board web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration.
With both front mounting speakers and sub-woofers, the iAM-VIDEO provides powerful sound output and audio reproduction that adheres to Wohler’s own strict specifications.
iAM-VIDEO can be software upgraded to support new and emerging technologies and is the perfect solution for any application that requires a compact unit for monitoring an evolving range of professional signals.
FEATURES & BENEFITS:
Touch screen front panel for intuitive control.
Built-in speakers, headphone jack, USB and Ethernet ports.
A range of signal inputs, including AoIP, MPEG2/4 and SFP slots for future I/O.
Store and retrieve presets via USB or remote software control.
Wohler Technologies has been in the business of in-rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise.
Flexible. Adaptable. Future Proof.
iAM-VIDEO is designed to be easy to operate yet powerful enough to provide high quality, intuitive monitoring of multiple signal types within a compact form factor.
iAM-VIDEO is equipped with a variety of metering options and supports Analog, AES3 and MADI inputs, with options for VoIP formats including MPEG2/4 TS and SMPTE 2022, AoIP formats including Dante™, Ravenna™ and AES67, 3G/HD/SD-SDI and a growing range of additional I/O options via an SFP interface.
High quality touch screen panels allow for elegant and intuitive control, with simple to navigate menus and configuration. Physical front panel controls provide access to main and auxiliary volume controls, balance control and a front mounting USB port for simple software updates.
All iAM Series monitors are built with an on-board web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration.
With both front mounting speakers and sub-woofers, the iAM-VIDEO provides powerful sound output and audio reproduction that adheres to Wohler’s own strict specifications.
iAM-VIDEO can be software upgraded to support new and emerging technologies and is the perfect solution for any application that requires a compact unit for monitoring an evolving range of professional signals.
FEATURES & BENEFITS:
Touch screen front panel for intuitive control.
Built-in speakers, headphone jack, USB and Ethernet ports.
A range of signal inputs, including AoIP, MPEG2/4 and SFP slots for future I/O.
Store and retrieve presets via USB or remote software control.
Standalone commentary unit (CU), or AoIP connected with 8 channels via Dante protocol. Scalable architecture: simple routing to DanteTM IP devices; integrated in IP intercom system, or connected to IP commentary system matrix.
Standalone commentary unit (CU), or AoIP connected with 8 channels via DanteTM protocol. Scalable architecture: simple routing to DanteTM IP devices; integrated in IP intercom system, or connected to IP commentary system matrix.
Standalone mono or stereo sound mixer with mixing, routing, tone and dynamics control. 3 commentator inputs and a dual-mono or stereo line level input. Listening of 8 remote and 2 local sources.
Operates as an intercom panel at the same time as a Commentary Unit.
Configurable as interpreter desk up to three languages.
3 1Gigabit IP ports per unit for redundancy, daisy chain and auxiliary data or video transport.
Dual power supply: 48VDC via PoE or external local power supply.
Software Configuration and remote control.
Rugged and ergonomic mechanics, suitable for indoors and outdoors locations.
The UNiKA DSP-428 Loudspeaker Management Processor utilizes state of the art 64-bit digital processing technologies with 24-bit delta-sigma data converters in 128x oversampling.
The DSP-428 is also a versatile DSP Audio Processor with 4 analog inputs, 1 AES/EBU input (2-channel), 1 DANTE audio network input, 8 analog outputs, Its processing capability includes Gain, Parametric EQ, Shelving Filters, Time Delay, Crossover Functions, Compression, Limiting, and Matrix Routing. All analog inputs and outputs are precisely balanced with XLR connectors. With 64-bit digital processing and the high quality converters available on the market today, the DSP-428 offers sound quality which can compete with whatever your reference unit of choice is.
The new D3G SDI to Dante /AES67 Networked Audio bridge allows for the conversion of SDI audio to Dante Networked Audio.
The new D3G SDI to Dante /AES67 Networked Audio bridge allows for the conversion of SDI audio to Dante Networked Audio. The D3G can convert 8-channels of SD/HD/3G SDI audio to a Dante network. In addition to the Dante audio the D3G also includes 8-channels of analog output for confidence monitoring and audio delay
for video path correction.
Features Include:
SD/HD/3G auto-detect SDI input with active loop-through
AES67 support
Onboard sample rate converters accommodate any Dante network sample rate
Eight professional balanced Analog line-level outputs
Optional output module slot for additional Digital or Analog Audio outputs
Adjustable Digital Audio Delay for video path delay correction
Channel Mapping allows any SDI input to be routed to any Dante output
LED indicator for SDI presence and power
Memory registers allow for saving/recalling system setups
The new M3G-XT allows for SDI audio monitoring and adds the ability to also monitor additional audio sources including Dante™/AES67 Networked Audio, SDI, Analog (Mic/Line) or Digital inputs. The M3G-XT allows for easy multi-channel audio monitoring—such as surround sound or multiple-language dialog tracks—to external monitor speakers.
With the ability to accept the complete range of Renegade I/O modules the M3G-XT can be configured for nearly any monitoring application. Add a Dante™/AES67 Networked Audio module and the M3G-XT can monitor both networked audio and the incoming SDI signal while simultaneously sourcing the SDI audio on the Dante™ network. Alternatively, add the new 3G/HD/SD dual-SDI module and gain the ability to monitor up to three SDI sources in one compact solution. The M3G-XT also provides the ability for additional outputs to be added, for example, an AES output module to be added to drive digital monitors or external meters.
The M3G-XT de-embeds the audio from any ancillary audio group present in a SMPTE SD/HD/3G SDI video stream. Up to eight channels of audio from any two groups may be monitored efficiently using the front panel, the remote GUI or automation API. An input select switch allows for monitoring of the SDI or the optional input module.
The NXLK-IP45F is ideal for handling audio and video signals in IP-based live production environment.
The NXLK-IP45F is ideal for handling audio and video signals in IP-based live production environment.
The NXLK-IP45F AV Multiplexer/Demultiplexer Board is capable of multiplexing or demultiplexing audio and video over IP. The board separates audio over IP and video over IP signals from video over IP or SDI inputs, or combines both into an SDI with embedded audio signal.
Interconnects SDI-based equipment with IP-based infrastructure
Option board for the NXL-FR318 Signal Processing Unit
Video and audio format flexibility
The board provides support for Dante and AES67 audio over IP formats and can handle both HD and 4K video formats.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
