Xilica - Solaro FR1

Xilica – Solaro FR1

Product Information

Solaro FR1 is a 1U 16-card-slot DSP with modular I/O functionality that can evolve to meet your future requirements, while benefiting from the processing power to drive multiple rooms over an installed CatX network. Xilica’s open-architecture digital signal processor can be populated with any combination of Solaro Series I/O card, offering capabilities including analog audio, USB (with volume/mute HID support), GPIO, relay control and AES/EBU digital audio. Incorporating the optional XC-CTODN module for networked audio, Solaro FR1 can handle up-to 64×64 bi-directional channels of audio over Dante, using standard CatX cable with no proprietary switches. With the capability to grow as you need, Solaro FR1 is a multi-purpose, scalable signal processor suited to most medium-to-large applications including multi-room conferencing, education spaces, and mass communication.

Specifications

Dante Ch: 64x64
Bit Depth: 24-bit
Sample Rate: 48kHz, 96kHz
AES67 Enabled

Tendzone – CLEAR D8

CLEAR D series high-performance network digital audio processor, analog channel and Dante channel have full-featured processing, 32-channel Dante network audio transmission capabilities, can be flexibly applied to medium and large-scale network audio systems such as star hotels, conference centers, stadiums, command centers, bus hubs and other occasions.

DSPs (Digital Signal Processors)

See the product

NST Audio

NST Audio – VMO16

The VMO16 brings all the benefits and experience of our live sound filters and dynamics algorithms to an installation product.

The 16 inputs from the Dante network go to a full 16x16 matrix mixer allowing any Dante networked inputs to be routed to any analogue output channel. All of the 16 analogue outputs have 16 bands of parametric EQ, 48dB/ Oct high and low pass filters, up to 1.3 seconds of delay as well as our high performance, two-stage PXL limiters for high performance loudspeaker protection.

All analogue audio connections are on Phoenix-type 3-pin 5.08mm pitch connectors. The 4 GPI connections allow configurable actions such as fire alarm mutes and preset recalls. Up to 30 presets can be stored with recall options allowing selective recall combinations of input, matrix and output sections.

Our D-Net control software for PC, Mac and iPad gives you complete control over ethernet amd wifi. The VMO16 is also fully compatible with our VR1 PoE remote control panel for simple, flexible user control. Control via third party systems such as Crestron™ is available via our simple ethernet control protocol.

DSPs (Digital Signal Processors)

See the product

VUE Audiotechnik

VUE Audiotechnik – V6-i

The V Series Systems Engines provide VUE loudspeakers with a highly sophisticated, networkable DSP and amplifier solutions that enable optimal performance when combined with almost any VUE loudspeaker system. The V Series Systems Engines provide VUE loudspeakers with a highly sophisticated, networkable DSP and amplifier solutions that enable optimal performance when combined with almost any VUE loudspeaker system. The V Series Systems Engines combine sophisticated, next-generation DSP technology, onboard SystemVUE networking, and powerful, high-efficiency class D into a compact, 2U rack mount chassis. The V Series line consists of two models, including the 2-in/4-out V4, as well as the 2-in/6-out V6. Both the V4 and V6 are available in either touring configuration (with front panel LCD interface) or installation configuration (without front panel LCD interface).

DSPs (Digital Signal Processors)

See the product

Xilica – Solaro FR1

Product Information

Specifications

Similar Products

Tendzone – CLEAR D8

NST Audio – VMO16

VUE Audiotechnik – V6-i

Stay connected to Dante

Support

Company

Dante Networking Alliance