Cart
← Back to Product Catalog

XTA – DNA100

Amplifiers

More details

Similar Products
  • Lake People

G103-D-4

Lake People Phone-Amp G103D4 is a headphone amplifier intended for DANTE networks. The G103D4 model comes with a DANTE 4/4 input and two independent stereo amplifiers. 24 Bit / 192 kHz D/A converters with a Signal-to-noise ratio >105 dB and THD+N as low as 0,002 % are driving the powerful headphone amplifiers. These are best suited to drive any headphones from low to high impedance and with low or high sensitivity. To adapt the amp to demanding headphones, to further reduce the noise level or to maximize the travel of the volume control, the gain is internally adaptable by Dip-Switches to optimize the amp; The DANTE digital audio signals are input via a standard RJ45 connector. Lake People G103D4 will accept 4 audio channels. The unpacked audio signals are input to two high quality D/A converters. The recovered analogue signals are buffered, attenuated in the analogue domain and then sent to powerful headphone amplifiers. If required, additional gain of +6 dB or +12 dB can be set by Dip-Switches inside the amp. Each amp section offers a 1/4” and 3.5 mm phone jack which may be used simultaneously. Power supply for the amp is accomplished either by PoE (Power-over-Ethernet) or by a USB wall plug adaptor (not supplied) with USB-B or USB-C connector. The case, front and back panel of G103D4 is made of rugged black anodized aluminum, the lettering is laser engraved. The volume knobs are also made of solid aluminum.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
mc2-audio-delta-100_1200px
  • MC2 Audio

MC2 Audio – Delta 80

Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
DSA-2000Q1
  • Inter-M

Inter-M – DSA-2000Q

DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall. High quality CLASS-D 4CH Professional Amplifier DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall.   4CH Dante™ Digital Audio Input You can input 4CH Dante™ digital audio through the network port and 4CH analog audio inputs.   Built-in DSP Parametric 8 band EQ, crossover filtear using HPF and LPF,delay, attack / release adjustable limiter.   Easy control of equipment through front panel with OLED and PC GUI Using OLED and operation switches installed on the front, and DSA-500Q dedicated software, various parameters can be adjusted.   Easy one-touch front dust filter cleaning It is possible to remove the front dust filter easily by separating the ventilator on the front of the equipment by one-touch method.   Simultaneous control of multiple amplifiers via PC GUI The PC GUI allows intuitive manipulation of various functions of the DSP, and simultaneous control of multiple amplifiers through IP registration of the equipments.   Up to 340 ms delay time adjustable When configuring a system with multiple speakers, you can adjust the Delay function to control the audio transmission time up to 340 msec for clear sound.   Frequency band adjustment using HPF and LPF You can use the Butterworth / Bassel / Linkwithz-Riley filter to adjust the frequency band required for your speakers.   Unlimited preset creation for environment-optimization Up to 10 presets can be saved to the internal memory of the device. In addition, environment parameters can be saved to a PC as a file via the PC GUI and can be easily managed without restriction on the number of files.
    Amplifiers
  • Dante Ch: 4x0
See the product