Dante-enabled Product Catalog

The DP648 retains the popular 4-input, 8-output format and features an optional Dante card, allowing for a combination of AES3, analog, and Dante/AES67 to be used. Comprehensive system processing is provided by dedicated input and output processing similar to the DP448 but enhanced with the multiband dynamic DEQ algorithms from the XTA DP548 and SIDD processors. The system offers full front panel control and Ethernet remote control via Audiocore Amped Edition, with integration in globcon XTA MC² Edition coming later this year. The combination of dynamics processing, IIR, all-pass, and phase filters, paired with very low latency (0.5ms), makes it the perfect choice for system engineers managing live shows, theatres, and clubs. The DP648 is supported by an extensive preset library and introduces the X Channel Preset concept built into XTA hardware for the first time. The DP648 completes the system for XTA. The MX36 provides fast source switching, the DP648 offers comprehensive system management, and its DPA and DNA amplifiers bring the power to drive systems large and small. Control is enhanced by the grouping system which works across multiple DP648 processors and DPA amplifiers. The 32 groups behave like a virtual 32-output processor.

The MX Series have been designed to offer a uniquely simple solution to the long-standing problem of routing of multiple mixing consoles outputs to a speaker system / system processor. Handling up to 36 inputs in 2U across analogue, AES and Dante networks, these are arranged in sets of four (to typically support Left-Right-Front Fill and Sub feeds from an individual console). All AES inputs have SRC. There is one set of four outputs, available simultaneously across analogue, AES and Dante networks with Word Clock output sync available on AES.

The MX36 has been designed to offer a uniquely simple solution to the long-standing problem of routing of multiple mixing consoles outputs to a speaker system / system processor. 

Handling 36 inputs in 2U across analogue, AES and Dante networks, these are arranged in sets of four (to typically support Left-Right-Front Fill and Sub feeds from an individual console).  All AES inputs have SRC. There is one set of four outputs, available simultaneously across analogue, AES and Dante networks with Word Clock output sync available on AES.

The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all. The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz ADCs. Connect to an  DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level.  Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level. Powerful processing features such as FIR filtering and Dante Networking work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single DPA amplifier can control a stereo 4-way system with no external processing and supply audio to a Non-DSP amplifier either via analogue or a single Cat5 cable.  Control via new AudioCore with advanced grouping architecture, or go wireless with our bespoke iPad app DeltaDirect. Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored wirelessly. Direct Ethernet, USB, and RS485 control options plus configurable GPIO offer unparalleled remote 
control flexibility.

Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level.  Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level. Powerful processing features such as FIR filtering and Dante Networking work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single DPA amplifier can control a stereo 4-way system with no external processing and supply audio to a Non-DSP amplifier either via analogue or a single Cat5 cable.  Control via new AudioCore with advanced grouping architecture, or go wireless with our bespoke iPad app DeltaDirect. Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored wirelessly. Direct Ethernet, USB, and RS485 control options plus configurable GPIO offer unparalleled remote 
control flexibility.

The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

The APA Series is a powerful processing platform that tightly integrates with its power supply featuring 96k analogue to digital converters not only on the analogue inputs++ but also directly at the speaker outputs, monitoring voltage and current. Inputs and outputs are simultaneously being processed by the DSP, along with data about the mains supply, allowing APA to adapt and correct to keep your music sounding better than ever. It’s not so difficult to add some DSP into an existing amplifier design, but to fully monitor all aspects of an amplifier’s performance from input XLR (or network port) to speaker terminals – that’s a little more involved… The APA Series can do this. We have designed a power and processing platform that tightly integrates with its power supply featuring 96k analogue to digital converters not only on the analogue inputs++ but also directly at the speaker outputs, monitoring voltage and current. Inputs and outputs are simultaneously being processed by the DSP, along with data about the mains supply, allowing APA to adapt and correct to keep your music sounding better than ever. In addition to this adaptive processing, you still have full control over a powerful suite of filtering and protection, including multiple bands of our legendary dynamic EQ, FIR filtering and phase linearisation, ultra-transparent limiting, and all the classic crossover and EQ components traditionally used to set up your system. Add to this a fully flexible matrix with the ability to source audio either locally from AES or analogue inputs++, or via a networked audio connection (Dante/AVB). With PC remote software also available, you’ll understand why we don’t think this is just an amplifier with some DSP built in… ++AES and analogue inputs standard, network audio inputs is a retro-fit option

Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all. Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all. The DNA Series offers  the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz ADCs. Connect to an  DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection. With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection. Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level. Powerful processing features such as FIR filtering and Dante Networking work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single DPA amplifier can control a stereo 4-way system with no external processing and supply audio to a Non-DSP amplifier either via analogue or a single Cat5 cable.  Control via new AudioCore with advanced grouping architecture, or go wireless with our bespoke iPad app DeltaDirect. Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored wirelessly. Direct Ethernet, USB, and RS485 control options plus configurable GPIO offer unparalleled remote 
control flexibility.

The NXBoB8 and NXBoB16 can be inserted anywhere in a Dante digital audio stream, converting the signal to analogue for carrying to analogue amplifiers and PA systems. The units will also act as an amp manager for the MC2 Ti amplifier range, learning the network setup and then interrogating the amps to check that they are performing normally and report on the operational status.

The NXBoB8 and NXBoB16 can be inserted anywhere in a Dante digital audio stream, converting the signal to analogue for carrying to analogue amplifiers and PA systems. The units will also act as an amp manager for the MC2 Ti amplifier range, learning the network setup and then interrogating the amps to check that they are performing normally and report on the operational status.