Cart
← Back to Product Catalog

XTA – DNA120

Amplifiers

More details

Similar Products

KS-audio-TA-4D_1200px|KS-audio-TA-4D_1200px
  • KS Audio

KS Audio – TA 4D with F MOD

4-channel power amplifier for F MOD with optional DANTE interface card. A unique solution for all applications in the field of professional sound reinforcement. From a linear 4-channel power amplifier to a “digital controlled multiway PA system”, any conceivable configuration is available simply by channel-wise program change or exchange of a controller module on the front. KS Audio TA 4D - 4-channel power amplifier for F MOD with optional DANTE interface card. With the newest Controller F MOD, all KS AUDIO systems can be operated with the most modern linear-phase FIRTEC equalization, simply by downloading new programs from the internal memory. 8 balanced XLR connectors and 4 Speakon power outputs are automatically adjusted in their function: the power outputs switch over to “bi-amp” or “bridge” mode when necessary, the XLR’s can be alternately used as input or output, both for analog and AES/EBU signals. One slot is intended for the optional DANTE card. Thus 8 further audio inputs are available. An Ethernet switch allows simple daisy-chaining.
    Amplifiers
See the product
atlasied-dpa804_1200px|atlasied-dpa804_1200px
  • AtlasIED

AtlasIED – DPA804

The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity.  However, the DPA804 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications.The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.
    Amplifiers
  • Dante Ch: 4x0
See the product
labgruppen-d-200-4l_600px|labgruppen-d-200-4l_600px
  • Lab.gruppen AB

Lab.gruppen – D 200:4L

D 200:4L combines 20000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring. D 200:4L combines 20000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring. The D 200:4L is based on the same foundation of robust, high-power amplifier technologies as our renowned PLM Series – an amplifier platform with a proven record of reliability and sonic performance on the world’s most grueling concert tours and in high-profile, large-scale installations. With the D 200:4L, those same core technologies have been updated and refocused to provide the ultimate solution for the most demanding digitally networked installed sound applications – in stadia, arenas, theme parks, performing arts centers, racecourses and other large commercial sound installations. In addition to legendary Lab.gruppen reliability and sonic excellence, the D Series incorporates newly refined outputs stage technologies along with installation-targeted hardware and software features that optimize amplifier system design and configuration. Together, these new technologies allow systems integrators to minimize both initial equipment costs and end users’ long-term energy consumption.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product