Cart
← Back to Product Catalog

Linea Research – 48M10-Dante

Amplifiers

More details

Similar Products

QX-41500D
  • Quest Engineering

QX-41500D

Quest Engineering's QX Rackmount Series amplifiers offer superior Class D performance with multi channel options across various models. Ideally suited for any installation requiring small to medium power amplification, the QX Rackmount Series offer real flexibility with auto load matching LoZ and HiZ (70V or 100V) and standby functionality. The series features class leading energy efficiency when units are in standby, while mute option enables the amplifier to be activated within 1ms. HP and LP filters available on any channel make for very quick and reliable installation.
    Amplifiers
See the product
ashly-nXp-4004_600px
  • Ashly Audio

Ashly – nXp4004d

The nXp4004d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x4
  • 48kHz-96kHz
See the product
PSX1204D
  • Bose Professional

PSX1204D

PowerShareX PSX1204D is a four-channel, 1200-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product