Cart
← Back to Product Catalog

XTA – DPA80

Amplifiers

More details

Similar Products

PSX1204D
  • Bose Professional

PSX1204D

PowerShareX PSX1204D is a four-channel, 1200-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
FLX320-1-70V|FLX320-1-70V
  • Stewart Audio

Stewart Audio – FLX-E-320-1-CV-D

The FLX320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, RS232 control and remote volume control. The FLX320-1-CV-D amplifier supports Dante™ audio. The FLX320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, RS232 control and remote volume control. The FLX320-1-CV-D amplifier supports Dante™ audio. The FLX (pronounced FLEX) Series of amplifiers is the most versatile 1/2 rack amplifier Stewart has ever produced. The FLX320-1-CV-D provides 320 watts into a 4 Ohm load. At the heart of the amplifier is a robust, internal, full-function DSP designed to solve a multitude of your audio problems in just one enclosure. The DSP includes a full cross-point mixer, EQ, filters, limiters and much more. A USB port makes programming simple, fast and repeatable for large installations. The RVC and RS232 control allow volume control from a wide range of devices. In addition, the Dante™ network capability provides four network input audio channels and four network output audio channels. You won't find a more flexible combination of power output and processing in a comparable package on the market today.
  • Onboard DSP for signal routing, filtering, and bridging
  • USB and RS232 available for configuration
  • 1/2 rack package
  • Remote Volume Control
  • Signal Sense Technology
  • Made in the USA
    Amplifiers
See the product
nXe-3.02_600px
  • Ashly Audio

Ashly – nXe3.02bd

The nXe3.02bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product