MinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.
MinFerno is designed for a single commentator/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.
The MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works. It is built to our exacting, rugged & robust standard to make it a reliable piece of broadcast equipment for the busy engineer.
SoundTube's new IPD Hub 2 Extender Box for adding onto a Hub 2 local system. Connect up to 5 IPD Hub 2 amplifiers to an extender box. The IPD Hub 2 utilizes a Dante infrastructure for flexible audio distribution. The amp is complete with local and Dante inputs and local and network control to address requirements for commercial audio connectivity in numerous scalable systems such as retail, bar, restaurants, hospitality, spas, education facilities, and more.
One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 64 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 85.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480, UL 2043 and EN54-24 listed.
One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 in. (0.9 mm) to 1.6 in. (40.6 mm). UL 1480 and 2043 listed.
One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 55 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 86.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.
Offering an economical option for expansion of audio coverage in a digital speaker system, this Dante®-enabled coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube®'s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Color-coded (green) tile bridge, UL listed conduit clamp and paint shield are included.
Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.
The FA-9600 dual channel signal processor simplifies all types of video conversion and offers a wide range of audio processing.
The FA-9600 is much more than a basic frame synchronizer. With optional expansion cards and software, the unit offers MADI/Dante/analog audio I/O, 12G-SDI/Quad Link 3G-SDI I/O, up/down/cross conversion, HDR/SDR conversion, and SFP+ module support.
・ 3G/HD/SD-SDI 2 inputs and 2 outputs with distribution output by each output, HDMI 1 input and 1 output.
・ Dual channel of frame sync, proc amp, colorimetry converter, color corrector, frame delay and clip function.
・ Dual channel embedded audio (16 channels, HDMI is up to 8 channels); AES/EBU I/O selectable for 4 inputs, 2 inputs/2outputs, or 4 outputs. (4 channels of stereo, unbalanced); audio multiplex and demultiplex function.
・ Gain control, SRC, down mix, re-map, mute, and audio delay functions.
・ Optional audio interface cards are available: AES/EBU I/O, analog audio I/O, MADI interface, or Dante interface.
The RX-V4.1 series of Restmoment's 4th generation digital conference system adopts Restmoment's new generation of digital conference technology, which conforms to the international digital conference standard. The system supports network control, DANTE audio input and output, remote conferencing, audio eight input and eight output (with partition output), independent tone, etc.
Sennheiser MobileConnect streams audio content via WiFi live and in superior quality to any mobile device. Following the Bring-Your-Own-Device concept, it is an easy-to-use and intuitive Assistive Listening system. Cost and maintenance effort for operators is kept at a minimum.
MobileConnect is optimized for use in existing network infrastructures. The MobileConnect system consists of three components: the MobileConnect Station, the MobileConnect Manager and the MobileConnect App. The MobileConnect Station is integrated into the existing campus network and distributes the audio content via WiFi to the MobileConnect App on the user‘s personal smartphone. With the MobileConnect Manager, all MobileConnect Stations in the network can be administrated conveniently and managed remotely from anywhere on the campus.
1. A Dante™/AES67 Audinate Brooklyn II module 2. An audio matrix 3. A external slot to insert all AxC cards from Auvitran. 4. A manageable L2 Ethernet switch
H1 makes easy the bridging between Dante™/AES67 and various digital audio formats (AES3, MADI,…) , AVB-MILAN as well. With a Mic/Line analog card, H1 becomes an high quality noiseless compact stage box. The integrated low latency audio matrix connects independently the audio channels on both sides of the bridge. AVS monitor software allows to configure the audio core and the switch (Groups, Transmit ports, Q.O.S, link redundancy,…) in a unique workflow. Integrated into a global network, H1 provides a dual-service functionality as a managed network switch and an audio end-point .As a convergent and modular tool, H1 save rack space, expand the possibilities and improves the job for money ratio with an all-in-one design. In addition, lighting communication protocols (ArtNet, MANet, SaCN,…) are supported. H1 is supplied with rack mounting parts. As options, you will find a wall-mounting kit and a truss-mounting kit.
Like all AGORA products, fiber optic and internal redundant power supply options are available.
Built upon Intel® SDM platform the BirdDog SDM Family will revolutionise the way content is distributed to even the largest installations. Simply install the SDM module inside an SDM compatible flat panel display for the most integrated and scalable NDI® to screen solution available. No more wall boxes or patch panels, now the AV distribution is built directly into the display.
Controlled by the all in one BirdDog OS and with two BirdDog SDM modules to choose from, M1 an M2, there is a solution for every project. M1 is a full NDI Sender and Receiver based on the Intel SDM-L form factor and M2 is an NDI Receiver built on the Intel® SDM-S module. With support for resolutions all the way up to 4Kp60, there is also a RESTful API for programming completely automated spaces.
M2 is an NDI® Receiver module based upon the Intel® SDM-S module. Receive NDI® from anywhere on the network to display on screen.
Built upon Intel® SDM platform the BirdDog SDM Family will revolutionise the way content is distributed to even the largest installations. Simply install the SDM module inside an SDM compatible flat panel display for the most integrated and scalable NDI® to screen solution available. No more wall boxes or patch panels, now the AV distribution is built directly into the display.
Controlled by the all in one BirdDog OS and with two BirdDog SDM modules to choose from, M1 an M2, there is a solution for every project. M1 is a full NDI Sender and Receiver based on the Intel SDM-L form factor and M2 is an NDI Receiver built on the Intel® SDM-S module. With support for resolutions all the way up to 4Kp60, there is also a RESTful API for programming completely automated spaces.
M1 is an NDI® Sender and Receiver module based upon the Intel® SDM-L module. Receive NDI® from anywhere on the network to display on screen. With the Send function you can plug a source such as a laptop in and then duplicate that across any number of additional BirdDog Display activated screens.
The Smart pi EDC is a partnership with EDC Acoustics to integrate EDC’s Plane Array™ technology which allows systems the ability to create 3D wave fronts. Each speaker is capable of vertical and/or horizontal steering as well as customizable wave shaping, allowing re-configurable pattern control to suit any venue or area further increasing speech intelligibility in difficult acoustic environments.
The Smart pi DVA is an Automatic (Digital Voice Announcement) system and is perfect for the transport industry. Incorporating a web-based GUI with mobile support that is easy to operate, with multi-language support, text to speech engine and more. Messages are clear and understood, every time with a built in scheduler, GTFS and GTFS-R support simple integration for automated announcements have never been this easy.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
