Product Information
The SWP2 series L2 switch is ideal for Dante 96kHz network systems. It features 10 etherCON ports and two single mode fiber opticalCON ports.
Specifications
- Dante Ch: 0x0
Similar Products
- NewHank
DI 22
NewHank DI 22 Dante network input adapter let you use your favorite analog audio gear with any Dante- connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost effec^ve, compact and built for the road, it brings the modern network connec^vity that every audio pro needs in their toolbox.
- I/O Interfaces
- Dante Ch: 0x2
- 24-bit
- RDL
RDL – FP-NML2VP
The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE.
The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network.
Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor.
The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.
- I/O Interfaces
- Sonifex
Sonifex – AVN-AI16R 16 Input Dual Dante® Interface, PoE
The AVN-AI16R audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
- I/O Interfaces
- Dante Ch: 0x16
- 16-bit, 24-bit, 32-bit