• Cart
  • AUDINATE > share

Cart

Dante-enabled Product Catalog

Amplifiers
Amplifiers
Data Interface Cards
Dante Interface Cards
Encoders & Decoders
Encoders & Decoders
Speakers
Speakers
Mixers
Mixers
DSPs
DSPs
I/O Interfaces
I/O Interfaces
Microphones
Microphones
Cameras
Cameras
dynacord-powerh-2500_1200px|dynacord-powerh-2500_1200px
  • Dynacord

Dynacord – PowerH 2500

The power amp H2500 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The power amp H2500 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with “floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms.    
  • Amplifiers
See the product
dynacord-RCM-28
  • Dynacord

Dynacord – RCM-28

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications.  The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in DYNACORD PowerH amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
  • Dante Interface Cards
See the product
dynacord-powerh-5000_1200px|dynacord-powerh-5000_1200px
  • Dynacord

Dynacord – PowerH 5000

The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.  The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with “floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms.    
  • Amplifiers
See the product
PreSonus_-_StudioLive_18sAI_subwoofer|PreSonus_-_StudioLive_18sAI_subwoofer
  • PreSonus

PreSonus – StudioLive 18sAI subwoofer

StudioLive® 18sAI Active Integration subwoofers deliver studio-monitor accuracy onstage with unprecedented onboard processing and networking features. With the StudioLive™ 18sAI active PA subwoofer, you can get pretty darned low—down to 35 Hz (-6 dB). Better yet, the 18sAI’s 18-inch ferrite speaker delivers those lows with an accuracy usually found only in studio monitors—except a whole lot louder (up to 135 dB SPL), thanks to a 1,000 watt (bridged), Class D power amplifier. It adds up to punchy, round-sounding lows that make kick drums, basses, and other basement-dwelling sounds come alive. But that’s just the start! StudioLive® 18sAI Active Integration subwoofers deliver studio-monitor accuracy onstage with unprecedented onboard processing and networking features. PreSonus® Active Integration technology enables wireless and wired networking control for setup, tuning, and monitoring functions, using an iPad®, a Mac® or Windows® laptop, or both. Powerful and musical, the StudioLive 18sAI naturally extends low-frequencies with a fast and accurate transient response and is a perfect mate for StudioLive 312AI, 315AI, and 328AI full-range loudspeakers, making it an ideal choice for installations and mobile applications where fidelity matters.
  • Speakers
See the product
bosch-dcn-multimedia-audio-power-switch_500px
  • Bosch

Bosch – DCNM-PS2 Powering switch

The DICENTIS Conference System integrates audio, video and meeting content with internet access in one single system. Emphasis has been placed on putting people and their content at the core of the system concept. This increases presentation effectiveness and enhances interaction between people. 
  • Conference Systems
  • AES67 Enabled
See the product
bosch-dcn-multimedia-audio-power-switch_500px
  • Bosch

Bosch – DCNM-APS2 DICENTIS Audio processor and powering switch

The DICENTIS Conference System integrates audio, video and meeting content with internet access in one single system. Emphasis has been placed on putting people and their content at the core of the system concept. This increases presentation effectiveness and enhances interaction between people. 
  • Conference Systems
See the product
Electrovoice_-_RCM-28|Electrovoice_-_RCM-28
  • Electro Voice

Electro-Voice – RCM-28

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
  • Dante Interface Cards
  • 24-bit
  • 48kHz
See the product
Crest_Audio_CKd_608_Front_03611440
  • Crest Audio

Crest Audio – CKd 608

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
  • Amplifiers
  • Dante Ch: 8x8
See the product
Crest_Audio_CKd_604_Front_03611450
  • Crest Audio

Crest Audio – CKd 604

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
  • Amplifiers
  • Dante Ch: 8x8
See the product
crest-audio-CKd-amp_1200px
  • Crest Audio

Crest Audio – CKd 1208

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 provides 1,250 Watts per channel in eight and four channels.
  • Amplifiers
  • Dante Ch: 8x8
See the product
Electrovoice_-_NetMax_Dante_Audio_Module_DM-1_1200pxl|Electrovoice_-_NetMax_Dante_Audio_Module_DM-1_1200pxl
  • Electro Voice

Electro-Voice – NetMax Dante Audio Module DM-1

32 in, 32 out Dante interface card for EV Netmax 32 in, 32 out Dante interface card for EV Netmax Features:
  • Connect NetMax to a Dante digital audio network
  • Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
  • Low latency (typically below 1 ms)
  • Two Gigabit Ethernet interfaces for system redundancy
  • Status LEDs for each interface
  • Dante Zen device-discovery
  • Compatible with Dante Virtual Soundcard
  • Dante Interface Cards
  • Dante Ch: 32x32
  • 16-bit, 24-bit
See the product
Rane_-_HAL_EXP1x
  • Rane

Rane – HAL EXP1x

The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate. The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate. DR remotes are also supported on any RAD port, so the EXP1x also adds additional DR remotes. The graphic below shows most of the range of RADs and DRs that connect with shielded CAT 5e cable (or better). 512 inputs and 512 outputs are possible if 32 EXP1x Expanders are cascaded to a HAL1x.
  • DSPs (Digital Signal Processors)
  • Dante Ch: 32x32
  • 44.1kHz-96kHz
See the product
Rane_-_HAL_EXP7x|Rane_-_HAL_EXP7x
  • Rane

Rane – HAL EXP7x

The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. Chain up to 32 EXP7x units to a HAL1x for 256 assignable AEC channels. Because EXP7x AEC channels are not associated with a particular hardware input, preset recall can re-assign an AEC resource across inputs / rooms as required. Drag and drop AEC supports the typical one-AEC-per-microphone configuration. With optimum acoustics, mic and loudspeaker placement, or with rarely used mics (such as audience mics) it allows mixing more than one mic into a single AEC channel, significantly reducing cost.
  • DSPs (Digital Signal Processors)
See the product
Rane_-_HAL_EXP5x|Rane_-_HAL_EXP5x
  • Rane

Rane – HAL EXP5x

The EXP5x is a 12 Mic/Line/Line-Plus input & DSP expander for the HAL1x. It also supplies four DR ports, useful for adding source selection and/or volume control remote controls. The EXP5x is a 12 Mic/Line/Line-Plus input & DSP expander for the HAL1x. It also supplies four DR ports, useful for adding source selection and/or volume control remote controls. Each of the 12 inputs independently supports either dynamic mic, 48V phantom mic, +4 dBu line-level, or Rane’s Line-Plus input. Line-Plus accepts -10 dBV unbalanced Left/Right Monoed together on the “+” and “–” ports, respectively. For stereo unbalanced sources, Line-Plus allows connecting the stereo RCA left tip conductor to the “+” terminal, the RCA right tip to the “–” terminal, and both RCA shields to the EXP5x Euroblock ground. Select Line-Plus in Halogen and you get a properly monoed audio channel.
  • DSPs (Digital Signal Processors)
See the product
Rane_-_HAL_EXP3x|Rane_-_HAL_EXP3x
  • Rane

Rane – HAL EXP3x

The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation). The EXP3x is an 8-channel analog output & DSP expander for the HAL1x (required for operation). Two RAD ports make it a 4-input, 12-output audio device — depending on which two RADs are connected. Thus, 32 daisy-chained EXP3x Expanders provide 256 discrete zone outputs maximum, including output compression, parametric EQ, two levels of paging and background music. Also, eight logic outputs and six DR remote ports are included. Therefore, 32 daisy-chained EXP3x Expanders would provide 64 RAD ports, 192 DR ports and 256 logic outputs. The dedicated DSP for each of the eight analog outputs offers two signal processing choices independently selectable per output. When you need background music, paging and emergency paging on an output, select the Zone Output processing set. This provides a Zone Processor block, and an Emergency Zone in addition to a Compressor and a 5-band parametric EQ with high- and low-cut filters. When Line Output is selected, the compressor and parametric EQ are available without the zone processing block and emergency paging blocks.
  • DSPs (Digital Signal Processors)
  • Dante Ch: 32x32
  • 44.1kHz-96kHz
See the product
Delec_R4000_600px|Delec_R4000_600px
  • DELEC

DELEC – oratis CS R4000

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck. The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck. Each matrix frame holds up twelve oratis IF LAN cards, each connecting one commentator terminal. The IF LAN cards can be combined with audio interface and intercom cards and can be supplemented with GPI interfaces used for controlling external devices. oratis matrix frames can include a line-ident memory used for loop-playing up to 24 idents. This enables the various stations live studio lines to be identified uniquely. As soon as the commentator goes on-air, the line ident is automatically muted.
  • DSPs (Digital Signal Processors)
See the product
delec-oratis-cs-mf4|delec-oratis-cs-mf4
  • DELEC

DELEC – oratis CS MF4

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck. The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck. Each matrix frame holds up twelve oratis IF LAN cards, each connecting one commentator terminal. The IF LAN cards can be combined with audio interface and intercom cards and can be supplemented with GPI interfaces used for controlling external devices. oratis matrix frames can include a line-ident memory used for loop-playing up to 24 idents. This enables the various stations live studio lines to be identified uniquely. As soon as the commentator goes on-air, the line ident is automatically muted.
  • DSPs (Digital Signal Processors)
See the product
Soundcraft_-_Vi_6_800pxl|Soundcraft_-_Vi_6_800pxl
  • Soundcraft

Soundcraft – Vi6

Now firmly established on riders and in performance venues around the world, the Soundcraft Vi6™ has been acclaimed as one of the most ergonomic, user-friendly and best-sounding large format digital console around. Now firmly established on riders and in performance venues around the world, the Soundcraft Vi6™ has been acclaimed as one of the most ergonomic, user-friendly and best-sounding large format digital console around. Audio quality is assured thanks to the integration of a proven DSP engine and algorithms from sister company STUDER, who's digital broadcast consoles like Vista™ and On-Air 3000™ are highly respected in national, state and independent broadcast studios and OB trucks throughout the world. Ergonomically, the Vi6 offers a wonderfully inviting user experience, thanks to the patented Vistonics™ II 'knobs-on-glass' channel strip interface. As another innovation from STUDER, Vistonics™ provides an incredibly tactile 'where you look is where you control' operating philosophy which combines the speed of access and visibility of controls of an analogue desk with the power of icon-based graphics and fully recallable settings that can only come from a digital console. The provision of 32 input faders plus a 12-fader master section makes changing layers much less frequent, enhancing the speed of operation, and world-class effects and processing from Lexicon and BSS completes the picture. The Vi6 offers connectivity to almost every type of digital audio format out there, via integration of Studer's D21m modular IO system, and comes complete with a modular remote Stagebox with a choice of either optical or copper connection to the main console.
  • Mixers
See the product
Soundcraft_-_Vi_2|Soundcraft_-_Vi_2
  • Soundcraft

Soundcraft – Vi2

The Soundcraft Vi2 is equipped with one channel section of 8 input faders, and the master section which holds 12 faders. The Vi2 can handle as many inputs as a Vi4 or Vi6 (96 channels) using the standard stagebox and local rack hardware, with access to 8 inputs at a time on the channel bay. Soundcraft now offers a Vi Series control surface for applications where space is very tight. The new Soundcraft Vi2 inherits all the basic functionality of its larger brothers the Vi4 and Vi6, but measures just 850mm in width, around half the size of a Vi6. The Soundcraft Vi2 is equipped with one channel section of 8 input faders, and the master section which holds 12 faders. The Vi2 can handle as many inputs as a Vi4 or Vi6 (96 channels) using the standard stagebox and local rack hardware, with access to 8 inputs at a time on the channel bay. By simply touching the input meters on the Vistonics™ screen of the master section, control of those inputs is brought onto the channel faders, along with all the channel functionality such as EQ, auxes, groups etc. In addition to the meter selection, three fully customisable layouts of the 8 input faders are available via the user-defined fader page feature. The Soundcraft Vi2 will therefore appeal to anyone who wants to use a Vi console but has more limited space than usual in which to operate. For example, it could be easily brought in at stage side for monitors alongside an existing console at festivals, or in corporate events where input access is less demanding than a multi-piece live band. The Vi2 is also suitable for use as a space-efficient spare console, and as an easily transportable training or programming unit. The Vi2's Show files are fully compatible with Vi4 and Vi6 consoles, and also with the Virtual Vi Offline Editing software. All the usual processing is accessible via the Local Rack, and even the 30-band graphic EQ's are available, by using a paging system, accessed via the 8 output section faders. The Soundcraft Vi2 provides a cost effective and useful accessory for existing Vi4 and Vi6 owners, who can use a Vi2 surface with their existing racks, which helps maximise rental inventory usage so that Vi console systems can be used on both large and small scale productions.
  • Mixers
  • Dante Ch: 64x64
  • 24-bit
See the product
Bose_-_ControlSpace_ESP_Dante
  • Bose Professional

Bose – ControlSpace ESP Dante

The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®. The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®. The Dante network card is installed into the digital expansion slot of the processor and includes primary and secondary Gigabit Ethernet ports that can be configured for switched (default), redundant, isolated or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
  • Dante Interface Cards
See the product
Bose_-_PowerMatch_Dante|Bose_-_PowerMatch_Dante
  • Bose Professional

Bose – PowerMatch Dante

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
  • Dante Interface Cards
  • Dante Ch: 8x8
  • 24-bit
See the product
tm-stagetec-dio
  • tm stagetec systems

tm stagetec systems – DIO

The tm stagetec systems DIO is the army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante™ audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources!
  • 1000 point FIR filters on outputs. (perfect for PA integration with existing 100/70V systems)
  • Customised DSP options
  • Native Delec communication panel integration
  • I/O Interfaces
See the product
dbs1
  • Four Audio

Four Audio – DBS1

This small 2 channel IO box based on the new Dante Ultimo solution is a cost effective but high quality solution for getting analog signals into or out from a Dante audio network without much infrastructure. It’s small and can be placed under the desk, onto a wall.
  • I/O Interfaces
See the product
ppa_1000
  • Four Audio

Four Audio – PPA 1000

The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers. It features Pascal high-power modules, analog, digital and Dante inputs and is available in different configurations for various kinds of speakers.
  • Amplifiers
See the product
1 … 117 118 119 120 121 … 127

Activating Third Party Apps

Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.

Activation instructions:

  1. Download and install the third-party application
  2. Download and install Dante Controller v4.5 or higher from https://www.getdante.com/products/software-essentials/dante-controller/
  3. Launch the application and leave it running
  4. Launch Dante Controller
  5. From the Dante Controller toolbar, launch the Dante Ready Activator tool
  6. The Dante Ready Activator tool will display purchase options for the third-party application
  7. Choose your desired purchase options
  8. Enter Audinate login information in dialog box that appears if not already authenticated.
  9. Enter payment information and complete transaction
  10. Your third-party application is now ready to use with your purchased Dante channels