Cart
← Back to Product Catalog

Glensound – GSi-DARK88

I/O Interfaces

More details

Similar Products

lynx-aurora-16_1200px_0|lynx-aurora-16_1200px_0
  • Lynx Studio Technology

Lynx Studio Technology – Aurora 16-DNT

The Aurora 16-DNT AD/DA converter provides world-class analog to digital and digital to analog conversion in a compact one-rack space format enabled for Dante audio networks. With sample rates up to 192 kHz, Aurora offers wide, open, uncompressed and unequalized audio for studios, mastering facilities, remote recording, broadcast and production.  The Aurora 16 AD/DA converter provides world-class analog to digital and digital to analog conversion in a compact one-rack space format. With sample rates up to 192 kHz, Aurora offers wide, open, uncompressed and unequalized audio for studios, mastering facilities, remote recording, broadcast and production. Lynx’s exclusive SynchroLock word clock offers extreme jitter reduction, providing clean digital audio signals for Aurora and other digital devices in the studio. Aurora also avoids some of the limitations that other pro level converters have. Aurora does not have a noisy fan, does not lose channel count at higher sample rates and does not require costly analog and digital modules to achieve the unit’s full channel count. Aurora can be used with any audio content. Equalization and limiting functions, which can color or alter the sound, have not been added. Lynx’s design provides accurate conversion, clear clean audio, wide imaging – the sound you put into Aurora is the sound that you get out of Aurora.
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product
equipson-dd4_0
  • WorkPro

WorkPro – DD4

DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors. It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.
    I/O Interfaces
See the product
dbs1
  • Four Audio

Four Audio – DBS1

This small 2 channel IO box based on the new Dante Ultimo solution is a cost effective but high quality solution for getting analog signals into or out from a Dante audio network without much infrastructure. It’s small and can be placed under the desk, onto a wall.
    I/O Interfaces
See the product