Cart
← Back to Product Catalog

Biamp – Tesira SERVER

DSPs (Digital Signal Processors)

More details

Similar Products

smartpidsp
  • Smart Pi

Smart pi – Smart pi DSP

The Smart pi DSP (Digital Signal Processor) is the next generation of digital PA processor with massive audio processing ability that can support the smallest to the very largest of systems. The Smart pi DSP is completely modular and future upgradeable via simple firmware updates. It is based on industry standards including Dante and OCA/AES70. The hardware comes in a 1RU Node or 2RU SuperNode format being able to manage up to 384 zones in a single unit.

    DSPs (Digital Signal Processors)
See the product
MA-808Dante-1
  • Magnetic

Magnetic – MA-808Dante

ModeMA-808Dante
Input Channels8
Output Channels8
Scenem anagement8 sets of pre -set scenes
Input channel featuresPre-amplification, signal generator, expander,compressor, automatic gain control, 5-section PE Q
Output channel features8-section PEQ, delayer, frequency divider, high - lowpass filter,lim iter
Sampling rate48kHz
Dynamic range from input tooutput>110dB
Phantom powerDC 48V
Input common-mode reject ion75dBu @ +20dBu,60Hz
Channel isolation105dB
Frequency response20~20kHz (±0.5dB )
Total harmonic distortion (THD+N )≤0.005% @1kHz,+4dBu
Max. input gain54dB
Input impedance2KΩbalance
Output impedance100 ohm
Max. output level20dBu
Power supplyAC 110V~230V AC, 50Hz /60 Hz
Working temperature0-40℃
    DSPs (Digital Signal Processors)
See the product
dtx-6464d front top_website
  • Aurora Multimedia

Aurora Multimedia – DTX-6464D

Aurora's DTX-6464D is a Dante enabled, all digital, audio DSP Aggregator. This fully networked family of professional audio products is ideal complement to Aurora’s IPX and VPX Video over IP solutions for House of Worship, Bars and Restaurants, Conferencing, and Education markets. The DTX ecosystem of products are purpose built to deliver pristine audio throughout the network while significantly reducing traditional device count and cabling costs.

DTX products use the industry-leading ADI 450Mhz SHARC 21489 chip and provides outstanding 24bit/48kHz audio quality.

The DTX-6464D is a high-density aggregator which features 64x64 Dante I/O. It is perfect for large centralized applications with multiple rooms or zones. In large, distributed systems that include analog I/O, significant benefits can be gained by using and aggregator vs a centralized DSP. This topology allows the DSP processing load to be distributed to smaller DSPs saving cost and adding survivability. The audio quality of the analog I/O also benefits by having the DSP connections close to the endpoints eliminating long analog runs, therefore reducing hum, buzz and ground loops.

Higher quality audio by to keeping analog runs short and local.

Considerably less cabling. Makes retrofit much easier.

Decentralization provides survivability. One room or even the aggregator can go down and all other rooms will continue to operate normally.

Distribution of the DSP processing load results in a less expensive solution and contributes to survivability.

Each room can be individually secured from tampering.

64x64 Aggregator facilitates content sharing across rooms and allows for automated control of switching/matrix.

    DSPs (Digital Signal Processors)
See the product