Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
nXp Series available in either 2 or 4-channel models.
Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation.
When in Sleep Mode, the nX amplifiers draw less than 1 Watt.
They are the networkable version of the nX amplifier with the addition of Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability.
Has 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking.
Precision load impedance monitoring on each amplifier channel output. All controlled using our proprietary Protea™ Software Suite.
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
The application of Matrix System contains both hardware and software, using host Matrix A8 as the control center, the whole function of this system is as below:
The basic system offers a total of 12 IN x 12 OUT without the Dante option.
I/O expansion is possible with 16pcs devices linked together for a maximum of 192 x IN and 192 x OUT.
With remote paging MIC RPM-200, can control paging in different zones.
With remote volume control RVA-200 or RVC-1000, can control volume in different zones.
Use different data line for audio signal and control signal RIO-200, which can avoid their conflict and increase their reliability.
Transfer audio signal based on AES/EBU transfer protocol, while transfer control signal based on RS-485 transfer protocol.
8 analogue IN / 8 analogue OUT via local ports
4 digital IN / 4 digital OUT via local ports to analog panel I/O
8 digital IN / 8 digital OUT via DANTE optional card
You might also be interested in the Matrix DB. It has the same features as the A8 but with 12 digital IN / 12 digital OUT and no analogue IN or OUT.
FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.
FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.
PA−150NET is a high−performance amplifier with both Dante™ and local inputs.
PA−150NET is a high−performance amplifier with both Dante™ and local inputs. This amplifier is built to power demanding professional and commercial audio installations that use the Dante digital media transport system. Its dual−input capability with its priority switch makes this amplifier a versatile and handy tool for many applications.
Inputs - Dante network source, balanced line level mono audio.
Outputs - 70V/100V speaker, unbalanced line level mono audio.
Output Power - 50W into one channel.
Controls - Line Level and remote volume/mute.
Priority Setting Switch - Net or local.
Auto Standby.
Safety - Conforms with UL 2043 heat and smoke release for plenum−rated environments.
Size - Compact TOOLS - Part of the Kramer TOOLS Family of compact high-quality and cost-effective solutions.
PA−225NET is a high−performance amplifier with both Dante™ and local inputs.
PA−225NET is a high−performance amplifier with both Dante™ and local inputs. Its dual−input capability with its priority switch makes this amplifier a versatile and handy tool for many applications.
The KH3 is a revolutionary compact line array element for medium scale events in stadium, arenas, concert halls and theaters.
The KH3 is a revolutionary compact line array element for medium scale events in stadium, arenas, concert halls and theaters.
2 x 12" Neodymium magnet-woofer with 2 . 5" voice coil and 1 . 4" compression drivers with a 2 . 5" voice coil each.
The KH3 is a medium to large format speaker with the ability to drive sound further, ensuring exceptionally high performance with a peak SPL of 138 dB.
The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors.
The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors.
The KA84 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
An onboard library preset with K-array speaker gives an optimal and easy configuration for endless combinations. All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector.
The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels.
The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel.
The KA24 is usable as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector. The KA24 features optical limiters an protection against over temperature, over current and short circuits.
The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware.
The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware.
Delivers maximum SPL, very low frequency and best bass response
Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup
The KRX402 is composed of four KX12 line array elements paired with two KMT21 Mark I 21" subwoofers and includes an extendable pole and dedicated hardware for joining, stacking and flying the system.
The KRX402 is composed of four KX12 line array elements paired with two KMT21 Mark I 21" subwoofers and includes an extendable pole and dedicated hardware for joining, stacking and flying the system.
Delivers maximum SPL, very low frequency and best bass response.
Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup.
The KRX202 is composed of two KX12 speakers coupled with a pair of KMT18 18" subwoofers and includes an extendable pole and proper joining and stacking hardware.
The KRX202 is composed of two KX12 speakers coupled with a pair of KMT18 18" subwoofers and includes an extendable pole and proper joining and stacking hardware.
Delivers maximum SPL, very low frequency and best bass response.
Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup.
KR802 features a pair of KMT218 dual 18" subs each with 2 channels of 2500 W matched to two KY102 with 4" Neodymium speaker elements.
With the portable KR802, K-array has developed its most advanced self-powered, portable amplification system ever. KR802 features a pair of KMT218 dual 18" subs each with 2 channels of 2500 W matched to two KY102 with 4" Neodymium speaker elements.
KR802 is a self-powered amplification system featuring two channels of class D amplification housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol also on an XLR for ease of cabling.
All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.
KR402 audio system features a pair of KMT21 21" subs each with 2 channels of 2000 W matched to two KP102 with 3. 15" Neodymium speaker elements.
KR402 audio system features a pair of KMT21 21" subs each with 2 channels of 2000 W matched to two KP102 with 3. 15" Neodymium speaker elements.
KR402 Mark I features two channels of class D amplification, housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.
KMT218P is much more than a standard dual 18" powered subwoofer. It's a high performance sub-bass system designed for medium-large throw applications, like theaters, clubs, concert halls, portable and permanent AV installations.
KMT218P is much more than a standard dual 18" powered subwoofer. It's a high performance sub-bass system designed for medium-large throw applications, like theaters, clubs, concert halls, portable and permanent AV installations.
KMT218P features two 800 watt 18"drive units with magnet structure engineered for maximum linear excursion.
The KMT218P is designed to be powered by KMT218 Speakon output and to be easily integrated with KY102 mid-high speakers.
The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations.
The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations. The amplifier mounted on board is class D, delivering 2 x 1000 W at 8 Ω. The KMT18 I features an integrated touch screen, providing intuitive control over the main DSP functions: input/output levels, signal routing, offset delays for subwoofer and speakon output (up to 12 ms) and overall system delay (up to 330 ms).
All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The KMT series provides two balanced analog line level inputs and a two-channel AES/EBU digital input. An integrated class D amplifier delivers 2 x 1000 W at 8 Ω, with a max THD of 1% (EIAJ test @ 1kHz). The KMT18 I features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including mid-high models (KK52, KK102) or additional passive subwoofers (KMT18P). To optimize performance, the on-board DSP includes up to 40 programmable presets. The unique four-corner port configuration provides symmetrical back loading to the speakers, for extended bass response with very low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread mount position for attaching mid-high speakers makes the subwoofer convenient to use and ideal for medium throw applications in theaters, concert halls, and Audio/Video installation
Easily transportable system featuring digital steering for outdoor venues with noise restrictions and space limitations
Easily transportable system featuring digital steering for outdoor venues with noise restrictions and space limitations
Readily adaptable and distinctively discreet for different applications at mid-size venues
Exceptionally high performance with a peak SPL of 138dB
KR202 is a portable PA sound system featuring a pair of KMT18 18" subwoofers each with 2 channels of 1000 W matched to two KK102, line array speakers with 16 x 2" neodymium magnetic transducers.
KR202 is a portable PA sound system featuring a pair of KMT18 18" subwoofers each with 2 channels of 1000 W matched to two KK102, line array speakers with 16 x 2" neodymium magnetic transducers. All the systems feature two channels of class D amplification housed in the subwoofer. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.
KR102 features a pair of KMT12 12" subs each with 2 channels of 1000 W matched to a KK102 loudspeaker with 16 x 2" Neodymium speaker elements.
KR102 features a pair of KMT12 12" subs each with 2 channels of 1000 W matched to a KK102 loudspeaker with 16 x 2" Neodymium speaker elements. The KR102 features two channels of class D amplification housed in the subwoofer, where you can also find input for a balanced line signal, balanced microphone signal with phantom power AES/EBU protocol and XLR for ease of cabling. All DSP functions, including EQ, can be controlled with remote managing software via USB or RS485, again conveniently on a standard XLR.
KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm.
KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485 on a standard XLR. To optimize performance, the onboard DSP includes presets to drive K-array speakers. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations.
KMT21 is much more than a standard 21" powered pro audio subwoofer system. The amplifier mounted on board is Class D, delivering 2 x 2400 W at 4 Ohm. It's usable as PA sound system for live concerts and dj sets but it's also suitable for various kind of temporary or permanent intallations. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm.
KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
The KH5SYS6 is a compact solution that saves space along with transportation costs for stadium venues and large events.
The KH5SYS6 is a compact solution that saves space along with transportation costs for stadium venues and large events. KH5SYS6 is an intelligent solution that provides continuous, even coverage for large venues.
The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches.
The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches. One cable does it all. A single CAT-5e or CAT-6 can carry both the audio signal (two-channel AES/EBU) and the data to manage all the devices in the network with the K-framwork software. Dante is an uncompressed, multi-channel networking technology that allows to transmit digital audio and data across standard IP networks.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
