Technical parameters：
Speaker model: CA-402D
Unit configuration: 2×4"(100mm) Full frequency unit
Frequency range: 110Hz-20kHz
Rated power: 60W
Sound pressure level: 113dB
Sensitivity: 93dB
Coverage Angle: 100°×60°
DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment
Connection mode: RJ45 interface
Size (mm) : 145×344×180 (W×H×D)
Speaker model: CX115P
Speaker type: 15”Active coaxial loudspeaker
Unit configuration: LF：15" unit 2.5"(65mm）Voice coil
HF：1.7"（44mm）Voice coil driver
Frequency response: 65Hz-19kHz(-10dB)
Rated power: LF：350W， HF：50W
Sensitivity: LF：98dB， HF：109dB
Sound pressure level： 131dB (peak)
Radiation Angle: 60°×60°
Crossover point: DSP control
Size (mm) : 632×423×392 (W×H×D)
Module amplifier power: HF：150W，LF：500W (Class D)
Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output
Module DSP control: RS485、USB or Dante
Technical parameters：
Speaker model: CA-401D
Unit configuration: 1×4"(100mm) Full frequency unit
Frequency range: 120Hz-20kHz
Rated power: 30W
Sound pressure level: 110dB
Sensitivity: 90dB
Coverage Angle: 100°×90°
DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment
Connection mode: RJ45 interface
Size (mm) : 145×253×180 (W×H×D)
The Aimline PoE series includes column loudspeaker with an integrated power amplifier that uses Power over Ethernet (PoE +). There is no need for any additional power supply. Thanks to highly efficient power electronics and a specially developed power amplifier an output of 30 W / 60 W peak (when using a PoE+ supply) can be achieved. Two DANTE channels are available with 10-Bd IIR filters, delay and the 24 internal presets offer all necessary configurations. It is controlled and monitored using the IP-based PAN C software. All active AIMLINE digital systems can therefore be controlled via just one software interface.
The AIMLINE AL 4.1PoE column speaker is powered by a POE+ network amplifier with two channel Dante input. No external power supply is required.Thanks to the use of a high efficiently power supply this amplifier is rated with 30 Watts RMS / 60 Watts peak (using a PoE+switch). The enclosure is equipped with 4 x 3,5” speaker and 1” HF driver in a biamped system.The internal powerful 96 kHz DSP gives access to gain, delay, 10-Bd EQ with IIR filter and 24 internal presets. The PANC software controls the DSP in an IP network. This system will solve the issue of having to provide a separate amplifier or I/O interfaces for speaker installations using just a single CAT cable over long distances. This assembly can be used in wide range of projects in multi zones for speech and background music applications.
The AIMLINE PoE series includes column loudspeaker with an integrated power amplifier that uses Power over Ethernet (PoE +). There is no need for any additional power supply. Thanks to highly efficient power electronics and a specially developed power amplifier an output of 30 W / 60 W peak (when using a PoE+ supply) can be achieved. The AL2.0PoE set consists of a pair of speakers. An active and a passive one. Each equipped with two 4 "drivers. Two DANTE channels are available with 10-Bd IIR filters, delay and the 24 internal presets offer all necessary configurations.
The X102FD has been developed to offer a powerful and highly efficient point source alternative to line arrays, in medium and smaller size application environments. Capable of power and performance far in excess of its compact form, the V-shaped geometry cabinet, features a symmetrical dual 10” LF driver arrangement with a 3″ titanium diaphragm, 1.4″neodymium HF driver and aluminium rotatable horn. With an Active+ integrated power and DSP control platform producing 3000 W of 2-way amplification, the X102FD is capable of 136 dB SPL continuous output.
The X102FD is able to be deployed in both vertically and horizontally, due to its rotatable horn with a simple ‘no tools required’ pull, turn and release mechanism. In vertical FOH applications the horn provides (HxV) 80 x 60 dispersion (in its default position). In the horizontal plane – for applications such as front-fills within a large-scale line array system, or close to ceiling hanging in an auditorium – quick rotation of the horn maintains (HxV) 80 x 60 dispersion. Likewise, (HxV) 60 x 80 coverage can be obtained in either plane.
Unique to Active+ is the rear-mounted rapid operation 3.5” TFT colour touchscreen GUI that provides for system configuration of individual cabinets prior to stacking or rigging. This combines user-configurable system management parameters and powerful R&D developed application-specific system pre-sets that provide for near-instantaneous setup of the most common cabinet configurations in the most regularly encountered applications. Remote Ethernet or wi-fi control is enabled via Amate Audio’s DSPStudio™ application. Active+ also provides Dante™ audio networking on the X102FD, via the two rear-panel Ethernet ports.
Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.
DP 180POE DSP Speaker can realize its multifunction the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. DP 180POE DSP adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality realizes on
this compact speaker of low power design. The system built with plastic body and 6pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. DP 180POE DSP integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control.
Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.
The SOLID15 is a compact, single 15 inch, 1.800W RMS low cabinet or subwoofer which can be used in many scenarios and in several configurations. The SOLID15 can be operated standalone, flown and stacked. The front-loaded subwoofer gives you the extra punch that you desire. It is extremely easy to deploy due to the numerous configurations available.
To be combined with FLEX6 and/or SOLID28.
The SOLID28 combined with the SOLID15 in low and the FLEX6 gives you access to a large scale of applications. This double 18 inch band pass powered subwoofer with a 3.000W RMS robust amplifier module gives you a massive output of 137 max SPL! With a frequency response of 25 Hz to 150 Hz, this subwoofer is able to go extremely deep and give you extraordinarily low frequencies with the same connectivity as the complete AED Audio portfolio.
The FLEX6 loudspeaker is the only professional multipurpose audio product available worldwide on the market, useable for a variety of applications. Because of its multipurpose way of deployment, this 1.300W RMS powered speaker can be used in several ways. Put the FLEX6 on a pole, stack it and create a column array, fly it as a line array up to sixteen cabinets, put two horizontally on a pole in a sub-top combination, etc. Why would you buy different types of loudspeakers if you can do all the jobs with one multi-functional speaker? The FLEX6 is the most efficient and versatile product for all your future jobs!
Invest in AED Audio FLEX6 and you can create all these setups by using only one single type of speaker. Supply all your rental jobs from one to 5.000 people by only investing in one system. This is the future of efficiency. AED Audio will provide you with the maximum return on investment
The MuxLab Dante Two Column Speakers PoE, 60W is mainly used in speech sound reinforcement system, works as the main loudspeaker in a multifunctional small conference room, or the supplementary loudspeaker in the medium-sized conference room. Could be used in small music sound reinforcement systems with subwoofer loudspeakers and can also be used with the latest Dolby surround sound systems as left or right surround, back surround, or ceiling surrounds sound box use. It supports a variety of installation methods including a convenient Ushaped frame. The special U frame provides two modes: fixed angle and adjustable angle. In the adjustable mode, the adjustment up and down angle is 15 degrees. You can also use the universal NBT717M wall mount frame or a vertical and horizontal multi-angle frame to hoist the speakers.
The MuxLab Dante Two Column Speakers PoE, 60W has a small and exquisite appearance, the cabinet is made of high-quality wood, which restores the original sound. The clean finish on the surface of the cabinet allows the speaker to adapt to different decorative styles. Free software calibration tool available to customize speaker sound settings. The MuxLab Dante Two Column Speakers PoE, 60W are sold in pairs.
The MuxLab Dante Ceiling Speaker PoE, 40W comes with a 6.5” coaxial 40W loudspeaker driver that has excellent dispersion, wide bandwidth, and smooth frequency response which makes this the top choice for today’s overhead commercial and residential applications. To achieve the distribution of power supply, audio signal transmission, and control functions the Dante Ceiling Speaker PoE, 40W uses only a network cable, making it a very economical option with great energy savings.
● Comply with Dante Network System
● Built-in 2x25W/2x50W digital amplifier
● Can play music, paging and alarm from the console
● One AUX input, one AUX output, 100V input
● 1 AUX output of RCA for power extension
● LED screen indicator for display status
Dual 8" 3WAY Dante
Network Line Array System. ARA means sea in pure Korean. Dual 8" line array speaker system for large scale venue
Providing highest quality sound to any space. BI-AMP / TRI-AMP mode selectable speaker system
Dante DSP powered line array speaker
You can meet cutting-edge technology audio system right now!
The digitally controlled line arrays Ascolto® are equipped with high-quality 3,5” neodymium loudspeakers, capable to spread perfectly voice as well as sound instruments. They can handle higher power applications, delivering great tone at any volume levels. Each Ascolto® digital line array contains a set of custom-designed, fully-programmable 135-MHz, 48-bit DSPs where high precision 76-bit accumulators ensure the bit resolution for a total quality in digital audio processing such as beam filtering and audio equalization.
The Ascolto AH2435 is unique for its acoustic directivity, extremely selective and capable of reaching deep space. The Ascolto AH2435 is particularly suitable to ensure an extended coverage in large environments, where it needs simultaneously a very incisive beam and a bright tone.
Ascolto AH2435
enhances the quality of the sound;
improves environment with acoustically difficult characteristics;
focuses the sound energy directly to the public, minimizing the effects of the sound
reflections of the ceiling and the side walls;
fulfills all aesthetic and architectural requirements;
distributes capably audio in cathedrals, churches, mosques, theaters, auditoriums, airports,
railway stations and in general everywhere it is necessary acoustic precision and reliability.
The digitally controlled line arrays Ascolto® are equipped with high-quality neodymium loudspeakers, capable to spread perfectly voice as well as sound instruments. They can handle higher power applications, delivering great tone at any volume levels. Each Ascolto® digital line array contains a set of custom-designed, fully-programmable 135-MHz, 48-bit DSPs where high precision 76-bit accumulators ensure the bit resolution for a total quality in digital audio processing such as beam filtering and audio equalization.
The Ascolto AH2435 possesses the innovative Anti Reverberation System ARS®, capable of increasing the voice intelligibility in reverberant environments. ARS conveys uniformly acoustic energy on the lower part of the audio beam and reduce drastically the audio emission upwards, attenuating significantly the acoustic reflections related to ceilings.
AVE Line Array User Control® is a sophisticated software application that uses a complex proprietary algorithm to calculate accurately SPL distribution of Ascolto® Digital Line Arrays from their EASE® models. It allows the user to select the appropriate dispersion pattern and transfer aiming and filtering parameters to the digital line array through the dedicated network.
The AVE IRC Infrared Remote Control lets you control the configuration settings even if a host computer is not available.
The AH2435 is optionally available with Dante card. Thus the AH2435 can be integrated in an existing speaker system or in a Dante network.
The AMK DT64-B-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.
One PoE amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with (2) speakers per audio zone.
The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.
The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications. The DT64-B-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.
Single 18" Subwoofer Line Array System. ARA means sea in pure Korean. Dual 10" line array speaker system for large scale venue
Providing highest quality sound to any space. BI-AMP / TRI-AMP mode selectable speaker system
Dante DSP powered line array speaker
You can meet cutting-edge technology audio system right now!
The digitally controlled line arrays Ascolto® are equipped with high-quality 3,5” neodymium loudspeakers, capable to spread perfectly voice as well as sound instruments. They can handle higher power applications, delivering great tone at any volume levels. Each Ascolto® digital line array contains a set of custom-designed, fully-programmable 135-MHz, 48-bit DSPs where high precision 76-bit accumulators ensure the bit resolution for a total quality in digital audio processing such as beam filtering and audio equalization.
The Ascolto AH3235 is unique for its acoustic directivity, extremely selective and capable of reaching deep space. The Ascolto AH3235 is particularly suitable to ensure an extended coverage in large environments, where it needs simultaneously a very incisive beam and a bright tone.
Ascolto AH3235
enhances the quality of the sound;
improves environment with acoustically difficult characteristics;
focuses the sound energy directly to the public, minimizing the effects of the sound
reflections of the ceiling and the side walls;
fulfills all aesthetic and architectural requirements;
distributes capably audio in cathedrals, churches, mosques, theaters, auditoriums, airports,
railway stations and in general everywhere it is necessary acoustic precision and reliability.
The digitally controlled line arrays Ascolto® are equipped with high-quality neodymium loudspeakers, capable to spread perfectly voice as well as sound instruments. They can handle higher power applications, delivering great tone at any volume levels. Each Ascolto® digital line array contains a set of custom-designed, fully-programmable 135-MHz, 48-bit DSPs where high precision 76-bit accumulators ensure the bit resolution for a total quality in digital audio processing such as beam filtering and audio equalization.
The Ascolto AH3235 possesses the innovative Anti Reverberation System ARS®, capable of increasing the voice intelligibility in reverberant environments. ARS conveys uniformly acoustic energy on the lower part of the audio beam and reduce drastically the audio emission upwards, attenuating significantly the acoustic reflections related to ceilings.
AVE Line Array User Control® is a sophisticated software application that uses a complex proprietary algorithm to calculate accurately SPL distribution of Ascolto® Digital Line Arrays from their EASE® models. It allows the user to select the appropriate dispersion pattern and transfer aiming and filtering parameters to the digital line array through the dedicated network.
The AVE IRC Infrared Remote Control lets you control the configuration settings even if a host computer is not available.
The AH3235 is optionally available with Dante card. Thus the AH3235 can be integrated in an existing speaker system or in a Dante network.
• Receives audio channels from other Dante-enable devices
• Powered by PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at)
• Built-in power amplifer, digital signal processor, 5-band parametric
equalizer, parameter presetting, volume and mute control
• Discoverable and controllable over a standard Ethernet network
• Offers overload protection
• Dante Controller software tool for managing all audio operations
Dual 10" 3WAY Line Array System. ARA means sea in pure Korean. Dual 10" line array speaker system for large scale venue
Providing highest quality sound to any space. BI-AMP / TRI-AMP mode selectable speaker system
Dante DSP powered line array speaker
You can meet cutting-edge technology audio system right now!
- Dante ULTIMO network
- 12", 15" 2WAY active network speaker
- 12", 15" LF driver / 1.7" voice coil HF driver
- 4 microphones or line Input, 1 line Output / birch cabinet
- LF, HF each digital amp / DSP audio control and GUI
The AMK DT84-B-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient 8” coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
