The SOLID28 combined with the SOLID15 in low and the FLEX6 gives you access to a large scale of applications. This double 18 inch band pass powered subwoofer with a 3.000W RMS robust amplifier module gives you a massive output of 137 max SPL! With a frequency response of 25 Hz to 150 Hz, this subwoofer is able to go extremely deep and give you extraordinarily low frequencies with the same connectivity as the complete AED Audio portfolio.
Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.
The X102FD has been developed to offer a powerful and highly efficient point source alternative to line arrays, in medium and smaller size application environments. Capable of power and performance far in excess of its compact form, the V-shaped geometry cabinet, features a symmetrical dual 10” LF driver arrangement with a 3″ titanium diaphragm, 1.4″neodymium HF driver and aluminium rotatable horn. With an Active+ integrated power and DSP control platform producing 3000 W of 2-way amplification, the X102FD is capable of 136 dB SPL continuous output.
The X102FD is able to be deployed in both vertically and horizontally, due to its rotatable horn with a simple ‘no tools required’ pull, turn and release mechanism. In vertical FOH applications the horn provides (HxV) 80 x 60 dispersion (in its default position). In the horizontal plane – for applications such as front-fills within a large-scale line array system, or close to ceiling hanging in an auditorium – quick rotation of the horn maintains (HxV) 80 x 60 dispersion. Likewise, (HxV) 60 x 80 coverage can be obtained in either plane.
Unique to Active+ is the rear-mounted rapid operation 3.5” TFT colour touchscreen GUI that provides for system configuration of individual cabinets prior to stacking or rigging. This combines user-configurable system management parameters and powerful R&D developed application-specific system pre-sets that provide for near-instantaneous setup of the most common cabinet configurations in the most regularly encountered applications. Remote Ethernet or wi-fi control is enabled via Amate Audio’s DSPStudio™ application. Active+ also provides Dante™ audio networking on the X102FD, via the two rear-panel Ethernet ports.
