Spatial Mic Dante precisely captures the entire soundfield with 8 capsules, while providing output flexibility for critical recording and live broadcast using Dante audio networking and remote output configuration.
No complex multi-microphone & preamp setups—plug in an ethernet cable with PoE and focus on capturing immersive audio for VR, surround sound, ATMOS, studio recording, concerts, and live broadcasts.
With the flexibility to output complex polar patterns of your choice and aim around the soundfield, Spatial Mic Dante brings the freedom to experiment with sound in completely new ways.
Leveraging Panasonic's 20-year experience in DECT wireless audio communications, the WX-SR200P 1.9 GHz digital wireless microphone system is the best-in-class solution for classroom or corporate presentations providing low latency for hybrid in-room/virtual presentations. Panasonic's digital wireless microphone system is easy to set up, easy to integrate with third-party control systems (such as Crestron and Extron) and easy to use. Setup is a breeze - the WX-ST200 pairs wirelessly with Panasonic's WX-SR202 receiver and assigns channels automatically, eliminating the need for manual channel assignment. The system can be expandable to suit a variety of spaces, from small classrooms, medium sized classrooms / conference rooms, to large auditoriums. Up to 8 separate antennas (per receiver) can be mounted to the wall or the ceiling in the room and connected via CAT5 back to the receiver locked away in a cabinet or closet and multiple 2-channel receivers can be installed to add wireless microphone channels to the room.
Designed to be used with Panasonic’s WX-SR204 or WX-SR204DN 4-channel wireless mic receivers, the WX-SE200DN Dante expansion receiver allows you to add up to 4 additional wireless microphone channels an existing Panasonic 4-channel system without the need to add an additional antenna to the system. Choose between Panasonic’s WX-ST200 handheld mics and/or WX-ST400 lavalier mic + wireless bodypacks) for microphone options. Perfect for classrooms, conference rooms, auditoriums, museums, retail, and bars / restaurants, the WX-SE200DN features a RJ45 (CAT5 / CAT5e / CAT6) connection to the Panasonic WX-SR204 or WX-SR204DN 4-channel wireless receivers, and Dante primary and secondary connections for independent channel outputs, external audio input and a mix output. LEDs on the front panel show the system status during startup & microphone pairing, antenna status during operation, and an LED indicator of when the receiver is being controlled remotely. Ships with rack ears for easy rack mount installation.
The ATND1061 Beamforming Ceiling Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state-of-the-art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061 is easy to install, set up, and operate.
1.
Exquisite and elegant design, ergonomic, very modern.
2. Original D-net IOT digital conference IoT system technology, in line
with IEC60914 international standard
3. With priority button function, you can turn off the representative unit
that is speaking.
4. The microphone is equipped with an ultra-quiet electronic touch switch,
which can avoid the mechanical sound amplification of the switch, and can
control the operation of the microphone pickup. The microphone has a bright
luminous halo to indicate the working status.
5. The unique audio processing circuit improves the clarity of the entire
system.
7. The chairman unit can use the priority button (Priority) and the
approval button (Permit) to control the speaking sequence and control the
meeting atmosphere.
8. The unit comes with a 2m Category 6 RJ45 network cable;
10. Independently adjust the microphone gain, which can be adjusted on the
microphone or computer management software, so that speakers with different
volumes can speak more smoothly;
9.1 Ø 3.5 mm stereo headphone jacks can be connected to headphones.
10. The unique ID number of the microphone unit, the conference system can
manually assign the conference unit.
Features：
Adopt all-digital conference technology, in line with IEC60914
international standard;
The exquisite and minimal structure design highlights the modern atmosphere
and conforms to ergonomics;
Brand new dual microphone design, longer pickup distance and wider
range;
Special electret capacitive single microphone core design, clear and bright
sound quality, high sensitivity;
Original microphone directivity variable technology, users can adjust the
microphone directivity according to different environments, locations,
meeting methods, and the needs of the speaker, so as to achieve an optimal
sound pickup effect, and support 5 modes: omnidirectional, heart -Type
directivity, super-cardioid directivity, sharp-heart-type directivity, figure
8 directivity, etc.;
Full digital audio technology, built-in high-performance CPU, faster
processing speed, better sound quality;
Ring hand-in-hand connection technology, the failure or replacement of a
microphone will not affect the work of other extensions of the system, and a
connection failure between the microphones will not affect the system work,
thus making the system more reliable;
Support line "hot swap", microphone access system can be added at
any time
The chairman unit has the priority function of full control of the
conference order, and the connection position is not restricted.
The chairman unit can short press the function button in the application
mode to allow the delegate unit to turn on the microphone.
In the conference mode, the chairman unit can short press the function
button to turn off all the microphones of the delegate units. If there is a
delegate unit waiting to be turned on, it will be turned on
immediately.
With the camera tracking host, after using the computer preset, the camera
can be automatically tracked;
There are 4 speaking modes: normal mode, first-in first-out mode, free
mode, application mode;
Two-color LED indicator, red when speaking;
With the sign-in function, the host computer initiates and checks the
sign-in situation;
Anti-interference from mobile phone microphone core, stable connection,
durable and reliable;
Independently adjust the microphone gain, which can be adjusted on the
microphone or computer management software, so that speakers with different
volumes can speak more smoothly;
1 Ø 3.5mm stereo headphone jack can be connected to headphones;
The conference unit has a unique serial number, and the conference system
can manually assign an ID to the conference unit.
EasyIP TableMIC D microphones connect to audio systems that utilize Dante networked audio signals. With 360-degree coverage from three unidirectional condenser microphone elements, a single EasyIP TableMIC D microphone provides excellent coverage for a small meeting room.
Designed to reduce distracting noises that arise in the conference room, the microphone’s solid metal base construction and engineered feet diminish table vibration noise that other table microphones experience. Each of the three unidirectional cardioid microphone elements in the microphone is equipped with integrated echo cancellation and Digital Signal Processing (DSP), including equalization, automatic gain control (AGC), and adaptive noise filtering.
Up to four EasyIP TableMIC D microphones can be paired with the popular EasyIP Mixer and AV Bridge 2x1 products. Pairing with Vaddio equipment can be done through our free Vaddio Deployment Tool and audio flows are managed through Audinate’s Dante Controller application.
The MXA710 Linear Array Microphone represents the next evolution in Shure array microphone technology, designed for high-quality audio capture in premium AV conferencing environments. The sleek, linear form factor of the MXA710 allows for placement virtually anywhere in a meeting space, including on a wall, around a display, ceiling, or into a conference room table. Available in two lengths and three colors, the MXA710 includes proprietary Shure IntelliMix® DSP and Autofocus™ technology that provides all the processing needed for echo and noise-free conference audio
EasyIP CeilingMIC D complements most interiors with its sleek design featuring smooth lines and quality acoustical fabric wrap. These overhead microphones are a great alternative to a custom installation or table microphones. Each EasyIP CeilingMIC D unit delivers the performance of three microphone elements built into a single pendant. Each unidirectional cardioid microphone element is equipped with integrated echo cancellation and Digital Signal Processing (DSP), including equalization, filtering and automatic gain control (AGC).
Installation is as simple as connecting a Cat-5e cable between the network switch PoE port and the EasyIP CeilingMIC D microphone receiver. Power, control and audio are all incorporated into the single cable. The CeilingMIC pendant includes a 3 ft. (0.9 meters) adjustable drop cable and with a standard RJ45 jack connection, the pendant can be extended to a total length of 15 ft. (4.6 meters) from the interface box.
DMIC Dante Microphone is a microphone with a built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience with extremely low latency, high fidelity and a low cost solution for paging and announcement.
Features:
Built-in Dante module Rotate gain control POE power supply Smart on/off switch
D-8 is a desktop microphone base with Dante function. It is suitable for quick installation of any XLRM Cannon head output gooseneck microphone. The microphone base is equipped with a capacitive induction tact switch and is equipped with a red / green LED indicator. . In local mode, the user can switch the microphone to mute or speak. You can set the real-time and mute audio switching between the repetitive switching (latch on / off) between speech and mute; or preset mute and only press the button. Speak at any time (jog to speak), or preset to speak and only mute when pressed (jog to mute). The microphone holder is made of heavy-duty die-casting technology, and a silicone sponge pad is installed at the bottom to reduce the noise caused by table vibration. Inconspicuous design and matte black coating can enhance the concealment when used in serious occasions. The microphone holder is designed for flat placement applications, providing high-quality radio applications such as high-quality radio, conferences, and distance education.
Features 1. Advanced modular design, four groups of receiving modules, each group has a built-in independent CPU processing system to complete audio processing and transmission. 2. Ultra-high-bandwidth UHF 600MHZ-700MHZ, suitable for occasions that require a large number of microphones, making it easy to form a wireless conference microphone system. 3. Superb reception, overcome long distance and complicated field environments. 4. Use Ethernet cable to connect directly to the network-no need to add and solder audio cables. 5. Can control Dante routing and settings through a computer 6. The entire scalable Dante system has 512 two-way audio channels 7. Both the network volume and the receiver volume can be adjusted separately. Technical parameters: IF frequency: first IF: 110MHz, second IF 10.7MHz wireless interface: BNC / 50 ohm sensitivity: 12 dB (80dBS / N ) Sensitivity adjustment range: 12-32 dB spurious suppression: ≥75dB Maximum output intensity: +10 dBV Frequency range: 600-700MHz Modulation mode: FM adjustable range: 50MHz Number of channels: 100 or 200) Channel interval: 250 KHz frequency stability: within ± 0.005% dynamic range: 100dB maximum frequency deviation: ± 45KHz audio response: 80Hz-18KHz (3dB) comprehensive signal-to-noise ratio:> 105dB Comprehensive distortion: ≤0.5% Working temperature: -10 ℃ ~ + 40 ℃
DMIC Dante Microphone is a type of microphone that with built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience that a extremely low latency, high fidelity and low cost solution for paging and announcement.
The MAS-A100 is a state-of-the-art speech reinforcement and recording solution. Attaching and positioning lavalier microphones is time-consuming, and handheld microphones restrict movement.
However, the Beamforming Microphone is simply affixed to the ceiling, then ready to use—leaving the orator location-free, hassle-free and hands-free to focus on presenting. Sony's comprehensive solution employs audio volume stabilization and clear audio processing to produce sharp recordings. The MAS-A100 has two channel outputs. The dual-output channel enables speech reinforcement and recording simultaneously. The dedicated rec channel records with a wider capture range and optimal intelligibility—perfect for lecture capture.
Inter-M's compact remote MIC series offer three line-up for easy operate as per environment. RM-VA1000 is a Dante™ based remote MIC station which can be used with "EVAMATRIX", audio matrix device for EN54.
The M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.
Installing the M55 requires just one 5/8-inch hole in the ceiling, with no additional tools needed. The M55's mounting hardware easily adjusts the hanging height up to four feet from the ceiling surface without removing ceiling tiles and allows for fingertip height adjustment and roHigh output allows distance miking.
Features
Optimized for voice recognition
Low-noise preamp circuitry
Immunity from RF interference
Two-color LED status indicator
RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
No external power adaptor required
Designed, assembled, and tested by Audix in the USAtation control. An optional aiming clip (MCHANGER) easily makes any additional angular adjustments
Dante Made Simple - By Audix
The M70WD is designed exclusively for the Audix Dante | AES67 Integrated Microphone System , which delivers high-quality audio and all microphone functions - including on-off contact closure and LED status indicators - through a single CAT5 - CAT7 cable with RJ45 connections. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost. And like all Audix microphones in the system, the gain structure is optimized for its intended use, providing quality audio at the DSP. The result is true plug-and-play installation.
The M70WD is a steerable, flush-mount condenser microphone designed for distance miking in a variety of applications, including video conferencing, distance learning, hospital rooms, surveillance, and ambient room miking. The flush-mount configuration and a footprint of only three inches in diameter allow the M70WD to virtually disappear.
The M70WD capsule is housed within a patented cradle that allows the microphone to be aimed up to an angle of 45 degrees. Other features include a fully integrated preamp and an extremely high sensitivity rating of 38 millivolts. In addition, the M70WD has complete immunity from RF interference caused by cell phones and GSM devices. Installing the M70WD requires just one 2-inch hole in the ceiling, with no additional tools needed.
Features
High output for distance miking
Aimable up to a 45-degree angle
Miniaturized integrated preamp circuitry
Immunity from RF interference
Two-color LED status indicator
RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
No external power adaptor required
Designed, assembled, and tested by Audixin the USA
3-year warranty
Dante Made Simple - By Audix
The M70WD is designed exclusively for the Audix Dante | AES67 Integrated Microphone System , which delivers high-quality audio and all microphone functions - including on-off contact closure and LED status indicators - through a single CAT5 - CAT7 cable with RJ45 connections. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost. And like all Audix microphones in the system, the gain structure is optimized for its intended use, providing quality audio at the DSP. The result is true plug-and-play installation.
The wired, Dante®-enabled gooseneck microphone can conveniently be integrated into a Dante® Audio over IP network and provides an excellent voice transmission for fixed installations in shops, hotels, in pubs and restaurants, in schools or indoor sports facilities. The installation is quite easy: the desktop microphone is connected to the network via the RJ45 jack and supplied with power via Ethernet cable (PoE). The free software 'Dante® Controller' allows you to determine which Dante®-enabled receiver is recipient of the routed audio signals. It is possible to transmit uncompressed and synchronised digital audio signals with virtually no latency. The touch-sensitive microphone button allows you to select the following operating modes: PTM, PTT, on/off and off/on. It is also possible to activate the 3-step attenuation which is separately selectable in case of high-volume signal sources.
PA desktop microphone (push-to-talk) with integrated Dante®module
The D Squared digital wireless microphone platform utilizes the Lectrosonics 4th-generation digital architecture for excellent flexibility, ultra-fast setup, studio quality audio, and ultra-low latency. The system includes the DSQD 4-channel digital receiver, DBu digital belt pack transmitter, and DHu digital handheld transmitter. System features include 24 bit, 48 kHz digital audio, 2-way IR sync, three different encryption key policies, and a tuning range from 470-608 MHz (470-614 MHz for export versions).
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
