Relacart – UR-2Q


More details

Similar Products

clockaudio-C303WD
  • Clockaudio

Clockaudio – C303W-D

Designed for audio or video conferencing, the C303W-D offers consultants and designers a new option when specifying hanging microphones in applications that demand the highest sound quality. The C303W-D uses the same tri-element microphone array, covering a 360 degree pick up pattern, but packaged in a Dante/AES67 version. Each independent capsule is RF immune, will capture approximately 120 degrees and is optimized for speech intelligibility. Its three channel, Dante transporter is powered by Power over Ethernet. It features an RGB LED ring on its ceiling rose (grommet) for mute status confirmation at a glance. It ships in a plenum rated enclosure for North-America. It does not require phantom power as it outputs on the Dante network.
  • Contains 3 high sensitivity cardioid capsules.
  • Designed to capture 360 degree pickup.
  • Engineered in high quality brass.
  • Include ceiling enclosure with locking grommet for easy height adjustment.
  • Supplied with 2.5 Metre cable terminating in a Tini Q connector.
  • Finished in Satin Black or gloss white finish.
  • RJ45 out allows fast connection to DSP or mixer.
  • Supplied with RJ45 to phoenix link cable.
  • 3 X Cardioid Patterns, 120° from each other, covering 360°
    Microphones
monacor-ecm-300dt
  • Monacor

Monacor – ECM-300DT

The wired, Dante®-enabled gooseneck microphone can conveniently be integrated into a Dante® Audio over IP network and provides an excellent voice transmission for fixed installations in shops, hotels, in pubs and restaurants, in schools or indoor sports facilities. The installation is quite easy: the desktop microphone is connected to the network via the RJ45 jack and supplied with power via Ethernet cable (PoE). The free software 'Dante® Controller' allows you to determine which Dante®-enabled receiver is recipient of the routed audio signals. It is possible to transmit uncompressed and synchronised digital audio signals with virtually no latency. The touch-sensitive microphone button allows you to select the following operating modes: PTM, PTT, on/off and off/on. It is also possible to activate the 3-step attenuation which is separately selectable in case of high-volume signal sources.

PA desktop microphone (push-to-talk) with integrated Dante®module

  • Electret, hypercardioid polar pattern
  • Selectable operating modes: push-to-mute (PTM), push-to-talk (PTT), on/off, off/on
  • Low cut switch
  • Switchable attentuation: -10/-20/-30 dB
  • Encoding: 16/24/32 bits
  • Sampling rates: 44.1/48/88.2/96 kHz
  • RJ45 jack for connection to a Dante® network
  • Power supply via PoE (Power over Ethernet)
    Microphones
atlasied-ipcsd4|atlasied-ipcsd4
  • AtlasIED

AtlasIED – IPCSD4

The IPCSD4 digital microphone station is a 4-button device for initiating audio / visual announcements, messages and pages with the GLOBALCOM®.IP IP108-D or IP116-D Announcement Control Systems.  The IPCSD4 digital microphone station is a 4-button device for initiating audio / visual announcements, messages and pages with the GLOBALCOM®.IP IP108-D or IP116-D Announcement Control Systems. The IPCSD4 uses a single Ethernet interface for audio and control data. The IPCSD4 is fully compatible with IEEE 802.3af standard for Power over Ethernet (PoE), allowing the microphone station to be powered directly from any standard off-the-shelf PoE switch.The IPCSD4 utilizes Dante™ technology for transporting high-quality, low-latency digital audio over Ethernet. The IPCSD4 microphone station may be used for emergency evacuation and life safety systems. Instead, in a dual-use system, these microphone stations may be used for everyday paging functions.It is compatible with IP108-D or IP116-D ACS™ Controllers with Dante™ capability.
    Microphones
  • Dante Ch: 1x1
  • 24-bit