The perfect solution to expand input and output signal to your mixer or third party professional audio devices. Connection through MADI and DANTE protocol.
The perfect solution to expand input and output signal to your mixer or third party professional audio devices. Connection through MADI and DANTE protocol.
PoE 60DD is an audio power module with 60w /8 output. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one cable.
PoE 60DD is an audio power module with 60w /8 output. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one cable.
Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering standards;
Audio transmission realizes digitization, networking, and system expansion;
distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. Can be widely used in ballroom / multi-purpose hall, classrooms, conference rooms, theme parks and other fields.
The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable.
The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable.
Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering specifications;
Audio transmission realizes digitization, networking, and system expansion;
distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. It can be widely used in ballrooms/function rooms, bars/restaurants, classrooms, conference rooms, chapels, theme parks, and shopping malls.
The Digiface Dante is a lightweight, portable audio interface, combining Dante network connectivity and features with everything that RME is famous for: USB 3, MADI, TotalMix FX and outstanding options in both USB and stand-alone operation.
Digiface Dante uses RME’s well-known USB driver for Windows and macOS, with lowest latency and industry leading stability, and is equipped with the latest TotalMix FX for flexible routing or mixing operations. High quality phones output offers a quick listen to any audio channel, but can also be used as line output to provide an additional analog stereo mixdown.
Two BNC sockets for word clock I/O are switchable to MADI I/O, with up to 64 channels. The total sum of Dante and MADI, 128 channels, are transferred via USB 3.0 and handled via both Dante control software and RME’s TotalMix FX, for full and struggle-free control of all audio.
Equipped with two banks of redundant network ports, the Digiface Dante is more than just an audio interface. It also offers the functionality of a switch, connecting up to 4 network lines.
Used without USB the Digiface Dante automatically turns into a 64-channel Dante / MADI converter. The analog stereo output can be preconfigured to send out a mix of exactly those channels that are needed.
Sommer cable's SPY-EDAO-C2 is a 2-channel Ethercon Dante®-Analog-OUT-Converter.
Sommer cable's SPY-EDAO-C2 is a 2-channel Ethercon Dante®-Analog-OUT-Converter.
Sommer cable's SPY-EDAO-C1 is a single-channel Ethercon Dante®-Analog-OUT-Converter.
Sommer cable's SPY-EDAO-C1 is a single-channel Ethercon Dante®-Analog-OUT-Converter.
The AV-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors.
The AV-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL2 is a professional grade product for studio quality fidelity and low noise performance.
The AV-NL2 may be powered from an external 24 Vdc power supply, available separately. The AV-NL2 is equipped to operate from a PoE enabled network switch. The AV-NL2 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL2, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The AV-NL2 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.
Features
Converts Two Dante Network Audio Signals to Balanced Analog
The Model 48D Dante Bridge provides a simple yet high-performance means of interconnecting, or "bridging," Dante audio signals associated with two independent local-area-networks.
The Model 48D Dante Bridge provides a simple yet high-performance means of interconnecting, or "bridging," Dante audio signals associated with two independent local-area-networks. The unit allows up to four audio channels to pass in each direction. Internal circuitry provides timing and bit-depth correction to ensure that audio signal integrity is maintained.
Sommer cable's SPY-EDAO-C3 is a 4-channel Ethercon Dante®-Analog-OUT-Converter.
Sommer cable's SPY-EDAO-C3 is a 4-channel Ethercon Dante®-Analog-OUT-Converter.
The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio.
The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. Thanks to its redundancy, the BRIDGE B3 can also provide secure distribution of your critical AES/EBU streams on any Dante redundant network.
Stainless steel 1U chassis power consumption <50 W
Front panel control interface for rapid overview of current status
Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.
The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.
Stainless steel 1U chassis power consumption <50 W
Front panel control interface for rapid overview of current status
Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams.
The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams.
Forming the backbone of your infrastructure, the AUDIOWAY Bridge B1 is the ideal solution to distribute and interconnect your audio streams both in the studio and externally.
Thanks to the software supplied with the product, the BRIDGE B1 can be used to route as well as monitor all inputs/outputs in every format (MADI – AES/EBU – AES67/Dante™).
As a complete single-box system it not only bridges audio-over-IP (AoIP) streams and legacy signals, but also ensures clock synchronization between the two systems.
AUDIOWAY Bridge B1 allows you to route and monitor low latency audio whatever the technology/protocol. It brings a seamless studio management with AVS-monitor, Dante™ Controller and multiple presets. It reduces the cost and complexity of AoIP integration into your studio infrastructure.
The AUDIOWAY Bridge B1 features 64/64 Dante™/AES67 full-duplex I/O channels, and is equipped with both 64/64 MADI I/O and 16/16 AES/EBU I/O digital audio interfaces, as well as a low latency hardware routing matrix between all inputs and all outputs..
AUDIOWAY Bridge B1 is very simple to use thanks to its control application which provides complete configuration and monitoring of all the streams operated by the equipment.
This ruggedized handy box lets you connect your legacy audio gear to the Dante™ world. It works both as a ramp-on device to convert an analog LINE signal into a Dante™ signal and as a ramp-off box to come out of the Dante™ network with an anlog signal. Both can happen siumultaneously!
The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante™ network. Simultaneously, NA2-IO-DLINE converts a Dante™ stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante™ network while at the same time receiving a mix from another Dante™ source. NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.
The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors.
The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors.
A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.
The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors.
The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors.
A poweful and flexible solution, the TASCAM ML-32D has 4 D-Sub intputs and 4 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.
The APB-D216 R-D is an active 19″ rack, AudioPressBox Drive Unit, 2 LINE Inputs, 2-channel Dante Interface, 16 Line/MIC Outputs, 2 buffered Outputs for up to 6 AudioPressBox expanders.
The APB-D216 R-D is an active 19″ rack, AudioPressBox Drive Unit, 2 LINE Inputs, 2-channel Dante Interface, 16 Line/MIC Outputs, 2 buffered Outputs for up to 6 AudioPressBox expanders.
2-channel active drive unit features 2 Analogue DANTE inputs with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs.
It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear.
Front outputs are balanced and individually transformer isolated with selectable output level for each output.
You can expand the number of outputs with AudioPressBox expanders with up to 48 additional Line/MIC outputs per channel.
As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists.
APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
The APB-D116 R-D is an active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders
The APB-D116 R-D is an active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders.
1-channel active drive unit features 1 Analogue and DANTE input with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs.
It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear.
Front outputs are balanced and individually transformer isolated with selectable output level for each output.
You can expand the number of outputs with AudioPressBox expanders with up to 24 additional Line/MIC outputs per channel.
As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists.
APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
PoE Power Consumption: < 2 Watt
Bridge up to 64 audio channels between the Waves SoundGrid and Dante protocols. The WSG Bridge lets you add real-time processing capabilities to a Dante network by using a Waves SoundGrid server dedicated to plugin processing.
Bridge up to 64 audio channels between the Waves SoundGrid and Dante protocols. The WSG Bridge lets you add real-time processing capabilities to a Dante network by using a Waves SoundGrid server dedicated to plugin processing.
'Speaking' both SoundGrid and Dante, the 1U rack-mountable WSG Bridge is the perfect way to bring Waves' powerful, award-winning plugins and sound into your Dante network. Easily route any of the channels from your Dante network to the SoundGrid network for processing, and back to wherever they need to arrive.
The ABX-5 can be used as an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system and as a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter.
The ABX-5 can be used in two ways:
1. As an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system. In this situation, the ABX-5 does not need an additional external power supply.
2. As a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter.
In both cases FOHHN-NET control signals will be transmitted via Ethernet.
The ABX-5 is equipped with a Dante™ Brooklyn II module. It has a Dante™ Primary and Secondary port for redundant applications.
Digimedia DIO XLR Pro is a 2 channel Dante™ interface with digital AES-3 input and output. Input has SRC. There is Dante Domain Manager and AES67 support build in.
Digimedia DIO XLR Pro is a 2 channel Dante™ interface with digital AES-3 input and output. Input has SRC. There is Dante Domain Manager and AES67 support build in.
Digimedia DAC XLR Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in.
Digimedia DAC XLR Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in.
Digimedia HPA Rotary Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.
Digimedia HPA Rotary Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.
Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W.
Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W.
Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.
Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.
Digimedia DIO RCA TOS Pro is a 2 channel Dante™ interface with digital SPDIF input and output. Input has SRC and is specially designed to connect CD and DVD players, satellite and digital radio tuners and DJ-consoles to Dante™ network. There is Dante Domain Manager and AES67 support build in.
Digimedia DIO RCA TOS Pro is a 2 channel Dante™ interface with digital SPDIF input and output. Input has SRC and is specially designed to connect CD and DVD players, satellite and digital radio tuners and DJ-consoles to Dante™ network. There is Dante Domain Manager and AES67 support build in.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
