Cart
← Back to Product Catalog

AudioScience – Iyo 32.32M

I/O Interfaces

More details

Similar Products

tascam-ml-16d|tascam-ml-16d
  • TASCAM

TASCAM – ML-16D

The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.
    I/O Interfaces
  • Dante Ch: 16x16
  • 16-bit, 24-bit
See the product
noa-n7000c_1200px|noa-n7000c_1200px
  • NOA

NOA – N7000c

Featuring groundbreaking implementations such as Bitproof Support and the revolutionary Dante Interface, the N7000C is the most advanced technology in the field of professional audio hardware, while fully supporting the well-established high quality industry standards and providing the archive community with additional tools. The N7000c provides a single high-quality interface that accepts up to four concurrent connections to analog replayer devices and delivers outstanding dynamic range, classic preamp modelling, Bitproof™ support and many other advanced features for the audio archive professional. The exceptionally wide feature set and convenient form factor set the N7000c apart as a versatile and cost-effective solution for high quality audio transfers. The N7000c is the first interface of its kind to offer the security of Bitproof™ control, a feature in conjunction with NOA Record which eliminates interstitial errors by creating checksums in the DSP of the N7000c and comparing them against the written soundfile, and it can connect simultaneously with up to four replay devices of different types, such as record decks, reel-to-reel tape decks,  Archéophone, and other analog players. Connections to player devices can be via RS232, 9pin and CAT5 through the integrated DANTE interface, which allows users to connect the laptop to the network to get eight uncompressed 192kHz LINEAR streams without needing PCI cards. With its outstanding 122dB dynamic range, the N7000c handles typical archival transfers without requiring gain readjustment, and leaves more than enough foot- and headroom. Dynamic adjustments can be left to simple server side normalisations which can be done without raising the noise floor in the analogue domain, making transfer workflows much more efficient.
    I/O Interfaces
See the product
audix-DN4
  • Audix

Audix – DN4

The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.

The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.

Audio Features

  • Compatible with all Audix RJ45-equipped, single-element, analog microphones 
  • High-fidelity 24-bit, 48kHz audio
  • Balanced audio inputs with RFI filtering
  • 48V phantom power output
  • Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
  • All channels controlled independently
  • Flash memory prevents loss of settings in the event of power loss

Dante® Features

  • Supports AES67 audio streams
  • Dante Domain Manager (DDM) ready
  • Dynamic or static IP address
  • Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications

Power Features

  • Operates on PoE from any IEEE 802.3af compliant equipment
    I/O Interfaces
See the product